I have been able to toggle CAPS, NUM AND SCROLL lock using the method below but using the code below that although no error occours when I click the button nothing happens?The code which works for caps, num and scroll
[Code]...
How to hold shift and then click button a and b (while holding shift)?
View 7 RepliesIs there any Toggle button control in .NET 2008? I know there is one in VBA but I can't find it in the .NET tools . I know I can use a Check box instead , but just for the visual aspect of my current form I'd like it to be a toggle button .
View 4 RepliesI am opening a web site in a vb.net 2008 webbrowser control. I want when I open the 3rd page of the web site then after the page is loaded , control focus programmatic-ly by Triggering TAB keypresses automatically by my code .
View 1 RepliesIn my keydown event handler, when Keys.Numpad4 is pressed with Shift, I get the same keycode code as for Keys.Right. Is this by design? How can I distinguish between the two?
View 5 RepliesCan I change my button control to toggle-button? Is there any simple way to change the button property to make it toggle button?
View 2 RepliesI am having an issue with my code. I have button1 and button2 each attached to an mp3 file. When I click button1, track 1 plays. When I click it again, the track stops...same with button2. Problem I want to fix is that I want to be able to click button2 while button1 is playing, and have button1 return to the "stop" state while track 2 starts playing.
[Code]...
In my Vb.net project I have to use a toggle button. I could not find any such control in the Toolbox list.
View 2 RepliesFollowing some excersises I came across a visibility toggle for a menu item which does not seem to work:
Private Sub mnuMenuSize_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuSize.Click
If mnuSize.Text = "Short Menu" Then
[Code]...
If I click mnuSize on the menu it changes the text allright but leaves the visible property of mnuUnderline, another menu item, as it was. In the watch window before entering the click procedure mnuUnderline.Visible and "not mnuUnderline" are opposites allright(as they would have to be) but no swap occurs at the toggle line: mnuUnderline.Visible = Not mnuUnderline.Visible and the code doesn't report any errors either. mnuUnderline is indeed one of the available menu items. If I change the statement to mnuUnderline.Visible = mnuUnderline.Visible (bit of a weird statement allright) it will toggle exactly one time for no appearent reason.
I was wondering how would I go about making a button a toggle button. what I mean is I press it once and it appears pressed.Press it again and it apears released,and have have the event set a boolean value?
View 3 RepliesI have a datagridview that is showing Yes and No in 2 checkbox cells. (Logically I should have just one checkbox but it is a legacy program (from Excel VBA)). So what I want to do is if the user clicks one checkbox cell to make the value True then the other checkbox in the row needs to be set to False. I have googled and searched the Forums here for an answer for this but found nothing really specific. The envisaged problem here of course would be that the events are mutual so they should not keep firing continuously in a "loop" when one or the other is changed - that might be the really difficult bit.
View 5 RepliesI have a piece of hardware that is controlled via USB.There are 8 LEDs on the output byte. One LED per bit.I like to toggle the outputs based on selection of checkboxes and given frequency entered in TextBox.I inserted 8 checkboxes to allow me to select the desired LEDs to be on.I select the checkboxes to select the required LEDs.The checkbox gives me the byte value. XORing the byte value with 255I can see them toggling very fast. I have a while loop to blink forever until I click on stop button.The stop makes the seq=false and this should stop the blinking but it keeps going.How can I insert desired delay of flashing frequency in my output routine?How can I stop on demand to change pattern without exiting the program.
View 2 RepliesI am really new at writing macros and want to keep them simple, but can't quite get this one to work. Here it is:
Sub HighLight()
Dim switch As Boolean
switch = Not switch[code].....
I created a toggle button and assigned this macro to it. However on the first click of the button, it only executes the first half of the macro--highlighting the requested cells yellow. Yet, when I click the button again, it does not turn the cells back to the un-highlighted state. From querying the web, most examples use the If-Then-Else.This is a macro that I got off the web and it works beautifully (and simply written):
Sub ToggleHideRows()
For Each cell In ActiveSheet.Range("H:H")
If cell.Value = "X" _[code].....
I was trying to write the first macro to act in quite the same manner as the second macro. Also, with the first macro I would like to add "cell.Offset(0, -7)" along with "cell.Offset(0, 2)".
How can I toggle the selection of a datagridview row?If I pick the Row once it should "highlight"If I pick the same row again I want it to "unhighlight"this is what I have so far in a mousedown event:
If
Selected_RowNM = Selected_RowNM_Temp Then
DataGridView1.ClearSelection()
End If
I'm fairly new to VB.net and this is my first post on this forum.I'm creating a website in Visual Web Developer 2010 Express in ASP.NET/VB and I'm trying to find out how to alternate a Reponse.Redirect, basically I'm looking to redirect every other visitor to go to a different site.
For example:
Visitor 1 gets: Response.Redirect("http://site-a.com")
Visitor 2 gets: Response.Redirect("http://site-b.com")
Visitor 3 gets: Response.Redirect("http://site-a.com")
Visitor 4 gets: Response.Redirect("http://site-b.com")
and so on
Also, if there is a way to set a cookie for that visitor, so if they visited within let's say the last 90 days, they will go to the same site they visited before, and not be redirected by the Response.Redirect.
I want this type of toggle button please click the link below to see my requirement: [URL]
View 2 RepliesI have a form with two seperate charts placed on top of each other.I am trying to set up a toggle button that works in sequence i.e. loads second graph over first on click. When clicked the second time it loads the first one and so on.I realise i can do this by making one visible then making it not visible but i am having troubles with the circular click requirement.
View 3 RepliesI'm making kind of home autmation system with a usb interface card.8 digital & 8 analog inputs and 8 digital & 8 analog outputs.The status of the inputs is refreshed with a timer.tick and written to variable.Now the problem.I want to make an digital output active when a button(real button, not a switch) is pushed and when it is pushed again the output should be set to non active.
action() is called every timer.tick
StatusDigInput1 = status of digital input =true when pushing button
StatusDigOutput1 = status used for displaying output status
[code]....
i have a dropdownlist in aspx (vb.net) that i have 2 dropdownlists. i want to show the second dropdownlist based on the value of first one. they are data wise interconnected, so if after selecting a certain record in first, if the second one has more than one record, the dropdownlist should be visible, else it should remain hidden. am sure this can be done with javascript, but i just dont know how.
View 4 RepliesI want to create a button such that on pressing it, a property is set to true and remains true until the user presses the button next time. How is this done?
View 9 RepliesI want to include two modes in my application. The user should be able to select one of the modes from the MenuStrip. When any of the modes is selected, a check sign should appear next to it as is seen in many application. Both the modes cannot be selected together and there is default mode when the applicaition is started.
View 3 RepliesI have a page which is used to display numerous forms for the user to fill out and get reports generated. Each of these forms is inside it's own ASP:Panel control so that I can toggle the visibility of the form (so that only those with appropriate permissions get access to the reports they are allowed to).
The client has now requested a "table of contents" like area on the page with hyperlinks pointing to each of the forms (so that they don't have to spend time scrolling the page to find the particular report form they want). This is easy to accomplish using standard <a href="#Area"> and <a id="Area"> tags. What I am now looking for is a way that would allow me to hide the links of reports that the user does not have access to.
I was first thinking of using the ASP:LinkButton control, but I do not want any postbacks to occur from clicking the links (that would be very unnecessary). Are there any other methods I could use to accomplish the same goal? I am looking for something which would make it easy for me to toggle the visibility of the corresponding link at the same time I am toggling the visibility of the panels containing the report forms (done now from the code-behind).
I don't know how to get shift modifier key as when I pressed shift and another key, it show message box "Modifier shift key"
View 1 RepliesCan VB.NET Form keyDown event determine whether left or right shift (alt, control) key was pressed? I always receive the same keycode (16) for both left and shift key!
View 3 RepliesI'm trying to enable toggle type selection on rows of a datagridview, i'm developing my project in Visual Basic .NET.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
With DataGridView1
.Columns.Add("Column1", "Column1")
.Rows.Add(4)
[Code] .....
How can I toggle between Hangul/English from program code. When the program changes input language/region from Hungarian/Hungary to Korean/Korea Korean language will appear with English keyboard layout. So I have to press the Hangul/English toggle key manually extra before I could use Korean layout.I have Windows XP and VB.net with a Korean keyboard. I use IME 2002 for Korean input.
View 1 RepliesHow can I toggle capslock? Visual basic 2005. Windows XP. I'd like to capslock on when the form load. This code doesn't work:
Public Class Form1
Private Declare Sub keybd_event Lib "user32" (ByVal bVk As Byte, ByVal bScan As Byte, ByVal dwFlags As Long, ByVal dwExtraInfo As Long)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Call keybd_event(System.Windows.Forms.Keys.CapsLock, &H14, 1, 0)
Call keybd_event(System.Windows.Forms.Keys.CapsLock, &H14, 3, 0)
End Sub
End ClassThe error is: PinvokeStackImbalance was detected.
(I'm a VB beginner, for the record : ) I am working on a form of an application. The form calls a table that contains fields. The I manually altered the column properties of the table to "Read Only". This is to avoid accidents and such. In the form I want the user to be able to add a row. Except there is 2 problems, but I am only concern with one.
[Code]...
[URL] RTB include editing such as CTRL-B BY DEFAULT. Same with Context menus.That, to me, means i don't have t write any code and I get those items when I put an RTB on a form.But I don't!
View 2 RepliesI'm currently ussing the following code to change my buttons into orange once clicked but i would like to make it toggle between grey and orange so if clicked once it shows orange; if clicked again it shows grey and clicked again orange then grey orange then.
[Code]...