.net - Writing A Byte Array To Memorystream Yields Only Zeros Being Written?

Jan 16, 2010

I've tried rewriting this code several times, it spits out the bytes correctly, but then when trying to read the array created from the memory stream, it's empty, what am I doing wrong?

Dim bytes() As Byte = System.Text.Encoding.ASCII.GetBytes("test this shit")
Dim bytesString As String = ""
Dim i As Integer = 0
i = 0
Dim byteStream As New System.IO.MemoryStream

[Code]...

View 2 Replies


ADVERTISEMENT

Initialize Byte Array To Zeros Given A Specified Array Length?

Aug 2, 2011

given the following Sub, how would I initialize byte array 'temp'to zeros and give it the length of the incoming byte array passed into the subroutine?

Sub ReceivePacket(ByVal buffer As Byte())
Dim temp() As Byte 'initialize to zeros and length of buffer
temp = buffer.Skip(17).ToArray()
End Sub

View 2 Replies

VS 2010 Extract String From Byte Array Or Memorystream?

Jun 16, 2012

I'm using WinPcap to capture incoming data. Basically I'm dealing with a continuous stream of incoming data, either as byte array or as memorystream (pieces up to 64kb).

I need to check this data to see if there's a certain url and then extract it.

The url I need to find looks like this:http://201.122.38.5/data/today/798572987-589571?139805890582 The length of the 'code' after "/today/" is always the same. The IP address changes. What's the best/fastest/most efficient way to continuously check these byte arrays or memorystreams and extract the urls without hogging the CPU too much?

[Code]...

View 5 Replies

Android - Convert Java Byte[] To MemoryStream?

Feb 15, 2011

We are developing an Android Application (Java) that reads an image, encode the bytes in base64 to send them over HTTP (via GET) to a WebService written in VB.NET.On .NET side, they are using this :

Dim Pix As Image
Pix = Image.FromFile("C:UsersPublicPicturesSample PicturesTree.jpg")
Dim ms As New MemoryStream[code]....

How can I pass the correct string to them to correctly decode the image from Java encoding (unsigned) to .NET decoding (signed)?

View 1 Replies

Writing AES Key And Encrypted Data To Same MemoryStream Not Working

Jun 24, 2011

I'm attempting to use symmetric encryption to encrypt some data, and store the key necessary to decrypt with the data in a MemoryStream. (While I know that this alone is really dumb security-wise, I'm going to use RSA to encrypt the symmetric key. Right now, though, I'm trying to just get this part to work.)I'm using the FileHelpers library to parse the data for my delimiter (the semicolon, as I don't believe I'll ever have a semicolon in the data). Unfortunately, in my decryption function, when it's parsing, it only returns back one record. And, if I show the entire string of encrypted data created at the end of this function, it doesn't appear to be using multiple records.I'm wondering if when I create the new cryptostream, it's defaulting to the beginning of the memory stream, so when I write my encrypted data, it overwrites the data I had just written to the memory stream.[code]

View 2 Replies

Read MemoryStream - Load Image Byte And Read It?

Feb 21, 2012

ok i have image that i bind info in it and i want to read the info now from file (FileStream) its workbut i want to do it not from file so i need to use MemoryStreamhere the example that work and how i do it now how i make it work with MemoryStream (with byte = My.Resources or PictureBox1.image)

Using FS As New IO.FileStream(image, IO.FileMode.Open)
FS.Seek(0, IO.SeekOrigin.End)
While Not FS.ReadByte = Asc("|")

[code].....

View 1 Replies

Convert Java Byte Array To .NEt Byte Array

Mar 24, 2010

I am trying to Convert a data field stored as IMAGE ( SQL Server 2000) using Java to a byte array using VB.NET Java uses signed numbers for a Byte array where as VB dosent. Can somone point me to how I can covert java byte array to VB byte array?

View 2 Replies

Combine Byte Arrays, Read Specific Sections, And Then Cut Byte Array At Specified Point?

Apr 6, 2011

Objective: Combine byte arrays, read specific sections, and then cut byte array at specified point.

Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....

I'm not sure if I have this right to begin with because I can't test it without having it completed.

View 6 Replies

Error: Value Of Type Ƈ-dimensional Array Of Byte' Cannot Be Converted To 'Byte'

Jul 13, 2012

how to upload file using fileupload control into sql database. I have class where i created insert function and getting info frm the .aspx.vb file

Class File
========
Imports System
Imports System.Data
Imports System.Data.SqlClient

[coe]....

View 2 Replies

Most Efficient Way To Merge 2 Byte Arrays Into 1 Byte Array?

Sep 20, 2011

I have 2 byte arrays. I want to merge these two byte array into 1 byte array.Usually, I just create a new byte array with length = byte array #1 + byte array #2. Then copy byte array #1 and #2 to the new byte array.do I have more efficient way to merge 2 byte array using VB.NET and .Net 4?

View 2 Replies

Value Of Type Ƈ-dimensional Array Of Byte' Cannot Be Converted To 'Byte'

Mar 30, 2009

I would like to create a function so that I can pass a string and it will return me the binary value, I will use this later in other parts of the script but I am getting an error that I don't understand.

Private Function ConvertToMD5(ByVal OldPassword As String) As Byte
Dim NewPassword As String = ""
'The string we wish to encrypt

[code]....

On the "Return hashedDataBytes I get "Value of type '1-dimensional array of Byte' cannot be converted to 'Byte'"

View 4 Replies

Operator '&' Is Not Defined For Types '1-dimensional Array Of Byte' And '1-dimensional Array Of Byte'.

Feb 26, 2012

I have 9 1-dimensional arrays of bytes and 1 of them is empty, I want to make the empty one equal to the others put together like you would a string:

Dim bla As String = "bla" & "bla" & "bla"
'now bla = "blablabla"
but instead:

[Code]......

View 9 Replies

Read A Raw Byte Array From Any File, And Write That Byte Array Back Into A New File?

Sep 20, 2009

How do I read a raw byte array from any file, and write that byte array back into a new file?

View 3 Replies

Convert A IntPrt To Byte Array (Byte())?

Nov 18, 2010

How could you convert a IntPrt to a Byte Array (Byte()) ?

View 19 Replies

Convert Byte Array Into A String Like So Dim Byt As Byte()?

Jan 25, 2011

I have a byte array that I convert into a string like so Dim byt As Byte() = New Byte(255) {} s = New String(Encoding.ASCII.GetChars(byte))My question is when I look at the string in a debuger its clearly a normal string but when I compare it to what I know its supposed to be it doesnt equal. So i did a quick check and for some reason its return a string thats the length of 256 characters. So i did a s.trim and it still is 256 characters long.

View 1 Replies

Stuff 8 Bits Into One Byte Of An Array Of Byte

Oct 2, 2010

given my code below, I'm trying to figure out how to create an array of 1 byte containing 7 bits. So the byte in the array would contain 0111111 to correspond to mData_Out's boolean values. How would I change the following code? [Code]

View 8 Replies

C# - Count Occurences In Byte List/array Using Another Byte List/array?

Jun 20, 2011

I am trying to get a count of all the times a byte sequences occurs in another byte sequences. It cannot however re-use a bytes if it already counted them. For example given the string let's assume the byte sequence was k.k it would then find only 3 occurrences rather than 5 because they would be broke down like: [k.k].[k.k].[k.k]. and not like [k.[k].[k].[k].[k].k] where they over lap and essentially just shift 2 to the right.

Ideally the idea is to get an idea how a compression dictionary or run time encoding might look. so the goal would be to get down to just 2 parts, as (k.k.k.) is the biggest and best symbol you can have.

Here is source so far:

[Code]...

View 3 Replies

Object Array To Byte Array - Marshal.AllocHGlobal Fragmentation Query?

Jun 14, 2011

I didn't think it fair to post a comment on Fredrik Mörk's answer in this 2 year old post, so I thought I'd just ask it as a new question instead..NB: This is not a critiscm of the answer in any way, I'm simply trying to understand this all before delving into memory management / the marshal class.

In that answer, the function GetByteArray allocates memory to each object within the given array, within a loop.Would the GetByteArray function on the aforementioned post have benefited at all from allocating memory for the total size of the provided array:

Dim arrayBufferPtr = Marshal.AllocHGlobal(Marshal.SizeOf(<arrayElement>) * <array>.Count)

I just wonder if allocating the memory, as shown in the answer, causes any kind of fragmentation? Assuming there may be fragmentation, would there be much of an impact to be concerned with? Would allocating the memory in the way I've shown force you to call IntPtr.ToInt## to obtain pointer offsets from the overall allocation pointer, and therefore force you to check the underlying architecture to ensure the correct method is used*1 or is there a better way? (ToInt32/ToInt64 depending on x86/64?)

*1 I read elsewhere that calling the wrong IntPtr.ToInt## will cause overflow exceptions. What I mean by that statement is would I use:

Dim anOffsetPtr As New IntPtr(arrayBufferPtr.ToInt## + (loopIndex * <arrayElementSize>))

I've read through a few articles on the VB.Net Marshal class and memory allocation; listed below, but if you know fo any other good articles I'm all ears![URL]..

View 1 Replies

Convert C# Class's Byte Array Values Into Integer Array?

Jun 22, 2010

A c# class's single dimension byte array contains socket level instrument sensor data as per:

public static byte[] frameData

View 9 Replies

VS 2008 : Checking Existence Of Byte Array Inside Another Array?

Jun 2, 2010

is there is any direct method or function in array class that can check if any given byte array is a subarray of other array?or should i loop through the each byte of main array to see if smaller array exists in that or not?

View 2 Replies

Get Array Data Passed Using ByRef From A .COM Program Written In C++?

Oct 5, 2010

VS 2008 VB/I've implemented an interface to a .com program written in c++. I'm trying to access a data structure array(uNewValues) of type PLCCOMMLib.ANALOG_CONTIN. uNewValues should be a datastructure array of several elements (iSigIDCount). My problem is I only get the first array element of the datastructure.I've tried several methods and looked into marshalling but don't understand how to implement marshalling if that is the correct option.

Code below:

Public Sub AnalogContinUpdate(ByVal iSigIDCount
As Integer,
ByRef puTimeDateStampGMT As PLCCOMMLib._FILETIME,
ByRef uNewValues As PLCCOMMLib.ANALOG_CONTIN)

[code]....

View 2 Replies

Convert Array In String To Array In Byte?

Oct 7, 2009

I have an array defined As string and the value stored in site is like "7E", "A1" and so on. But in order to send out this array through serial port. I need to change the the array to As Byte instead of using As String. How can I convert it?

View 8 Replies

Convert Byte Array To Boolean Array?

Nov 4, 2010

The following image or RTF file illustrates how I'm trying to transform an input Byte array into an output array of Booleans. This is basically what I have listed below. figure out how to get from one array to the next while shifting values of bytes within 8 byte groupings to shift low order to high order or vica versa. What I mean by that is best seen by looking at the illustration of actual input an required output. The reason for this is that the hardware devices have registers and the display which can be seen in the links above needs to convey the disabled sensor cable cell locations.

[Code]...

View 1 Replies

Repost - Array Of Booleans To Byte Array

Oct 6, 2010

The code below contains the actual data I receive as input and the required output to send to a hardware device. The application requires incoming boolean values be processed in sets of 8, corresponding to their resultant Byte value. The first incoming boolean value must assume the least significant position of the resultant Byte Value. False, False, True, True, True, True, True, True will result in a Byte Value of 252 if viewing the resultant Byte value in the debugger. Those boolean values will be reversed in order to become True, True, True, True, True, True, False, False. What I can't figure out below is how to accomplish this in the form of masking or shifting the values to accomplish this.

[Code]...

View 3 Replies

Object Array To Byte Array VB Or C#?

Aug 30, 2010

I am working on a project and came to a junction. I have various data in a object array, myObj().

How can one convert Object Array to Byte Array

I dont know if i should be using Memory Stream, Buffer, etc.

View 1 Replies

Windows - Write Yields #ERROR 448#

Sep 8, 2009

I have a bit of ported code. It was automatically converted from VB6 to VB.NET. Now when if finally compiles, it produces output files with some values replaced with literal #ERROR 448#.I will eventually find out what's the problem, but I just wonder, if anyone knows what does this error mean. VB's Write function is used.

View 2 Replies

Why Does C# Define Byte+Byte=Int32 Instead Of Byte+Byte=Byte Like VB?

Aug 7, 2010

Why does C# define Byte+Byte=Int32 instead of Byte+Byte=Byte like VB?

View 1 Replies

Setting Nullable Integer To String Containing Nothing Yields 0

Dec 14, 2010

I've been pulling my hair out over some unexpected behavior from nullable integers.If I set an Integer to Nothing, it becomes Nothing as expected. If I set an Integer? to a String that is Nothing, it becomes 0! Of course I get this whether I explicitly cast the String to Integer? or not.[code] Previously I had my code up here so without the explicit conversion to Integer? and everyone seemed to be fixated on/confused by that. There were a lot of suggestions that Option Strict On would catch this type of thing. However, this is actually a quirk of the string-to-integer conversion rules which predate nullable types, but still impact them.

View 2 Replies

.net - Getting 4 Bytes From A Byte Array?

Jan 2, 2010

I have a byte array and I need to get 4 bytes from it at a certain location(16) but I don't want to convert it to a integer or anything just keep it as 4 bytes to store in a variable.

View 1 Replies

Byte Array And Average Value

Jan 28, 2009

i'm working on something to get the average color from an image and the code i have puts all the rgb values into a byte array, so the values are being stored as (r,g,b,r,g,b,r,g,b,r,g,b,r,g,b,etc). how would i loop through each r value to add them to another array to then be able to calculate the average (and so forth for g and b as well).

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved