I am using Expresion Blend 3 and created a new user control in my project. I want a storyboard to run if a custom property of that user control is triggered like with the ones shown here in the list..
I learnt you need a dependency property, but my understanding there is limited. Here's the basic code I set up with property "IsAwesome" as an example[code]...
I have a userControl11 (either in winform or wpf) which has a ValueChanged custom event. If I put it in client form and in form_load set its value to 100, it will trigger the ValueChanged event. But if I set this value inside the constructor of UserControl1 the custom event won't trigger. How can I force it to do so ?whatever the technical reason, functionally it does make sense. If the object is initializing its value from some sources unknown to the client form and the client form has a textbox bound to this usercontrol value, it is sure convenient that it could refresh its textbox at any time including when the form loads just using one single event handler. Without this the client form has to create another initializer for this bound textbox at form load.
Below the source code of my trials in winform:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[code]....
I have an ASPX Custom Control which is supposed to load it's properties into an internal collection (defined with PersistenceMode.InnerProperty). Here's the ASPX
<cc:CustomControl runat="server">
<Queries>
<cc:QueryTypeOne ... />
[code]...
I have a problem with a property on a custom property of a class. Here is the actual code for the inherited form
Public Class Form : Inherits System.Windows.Forms.Form
Private _Active_Application As Custom.Classes.Active_Application = New Custom.Classes.Active_Application
<System.ComponentModel.EditorBrowsable(ComponentModel.EditorBrowsableState.Always)> _
Public Property Active_Application() As Custom.Active_Application
[code]....
but when i use a separate class to inherit the above class this property ('Active_Application', not Custom.Classes.Active_Applicaton) is disabled.
I have a main form that has a dynamically generated treeview and also a panel control. Depending on the selection made within the treeview the panel docks 1 of three diffrent usercontrols which are full sub forms(done for ease of modifing design of sub form rather than layering panels on top of panels).Upon button click withing usercontrol i wish to trigger event within main form.For example delete button wich then triggers to remove current selected node from treeview. code for 1 of three diffrent user controls
Dim ctrlQ As New QuoteUC(TrViewQuotation.SelectedNode)
PnlSubFormDock1.Controls.Add(ctrlQ)
Code for delete button for which i need to raise event.
If MsgBox("Are you sure you wish to delete this customer ?", vbYesNo, "Delete Record") = vbYes Then
Deletecustomer(n)
End If
i have to develop a software for motorola mc9090 that reads barcodes and rfids simultaneously, so i need to catch two different triggers: the one on the keyboard for barcodes and the other in the backside for rfids.the problem is that i didn't find any sample that illustrates how to set the trigger to read only barcodes, i found something on emdk 2.5 samples that shows how to set the trigger to read rfids but nothing for barcodes. So when i press any trigger the barcode reader is always enabled with rfids reader.Does exist a way to manage them with separated triggers?
View 1 RepliesHow can I shift the GET-implementation of a Class property to a / using a custom attribute? (I've added instantation vars (classname, propertyname) to the attribute, however I'd rather have these automatically fetched ofcourse.)
Public Class CustomClass
<CustomAttributeClass(ClassName:="CustomClass", PropertyName = "SomeProperty")> _
Public Property SomeProperty() as String
Get() as String
[code]....
I have created a custom class, which contains a panel and a label on it. I added to this class a pcaption property, which holds the label text. This property is browsable and I can change its value.But when I drag the custom control to the form and change the pcaption property, it has no effect. Even the <Defaultvalue> has no effect. Why?
Here is the class code:
Imports System.ComponentModel
Public Class mypanel
Inherits Windows.Forms.Panel
Private panelcaption As String
[code]....
Color values are unimportant, you can change it.
I created a new DataGridViewColumn type called DataGridViewGradeColumn.
Public Class DataGridViewGradeColumn
Inherits DataGridViewTextBoxColumn
Public Property AssignmentName As String
[code].....
I have two forms, say Form1, Form2
Form1 has one textbox and one button, Btn1 when clicked, it opens Form2 as dialog.
Form2 has one textbox and one button too.
First I click on Btn1 to open Form2 as dialog. And when I click on Btn2 on Form2, I want the text in the Textbox2 to be copied to TextBox1. I know it could be done by Public Property Get, Set but I am stuck.
this is the code for my property
Dim _playernumber As Integer
Property Player() As Integer
Get
[code].....
I am developing a custom control with VB9, and I want to add a Property Name TextFileName this property need to use OpenFileDialog, which type I can use when I define this property?
for example another property I use is EnterFocusColor and its type is System.Drawing.Color so when the user select the property it opens the ColorSelectionDialog Hany M. El Tarhony
I'm trying to add validation to one of my class properties:[code]The value for the golfer's handicap comes from a oombo box on the form. Even if I have nothing set for this property at runtime, my validation doesn't work. I tried putting the If statement under Get instead of Set, and tried mHandicap = value after an Else in the If statement, but nothing seems to work. I'm working in the dark here and can't find anything suitable online. I was hoping to not go down the path of ReadOnly or WriteOnly properties as I'm not at that stage yet, but does this make a difference for my purposes here? Can anyone guide me as to what I'd need to do from this point? If I've got it right, you can add validation in the class and this means that you then don't need to repeat this validation in the form??
View 3 RepliesI have created a CustonControl (NOT a usercontrol) and defined a DependencyProperty as following
[code]...
I have created a little demo application which is able to create a meeting request by using the Exchange WebService (EWS). I would also like to add some custom properties to this item but up to now I have only found examples which use the Exchange Managed API, which I won't use. There must be a way to create these properties by only using EWS... Does anybody know how and can provide a little code example?
View 1 Repliesi wrote a custom attribute and got the following Color property that I want the user to be able to indicate the color property in the attribute on a class:
Private _ColumnColor As System.Drawing.Color
Public Property ColumnColor() As System.Drawing.Color
Get
[Code]....
I'm trying use just a user control form to act like the old VB6 picturebox. Mainly, i'm doing this is because a user control form is also a container but i also want it to have an image property. I've done this. The new control does have an Image property but the problem is that the user control form doesn't have an image property but only a BackgroundImage property.I was hoping that there is some way to place the selected image, directly on the surface of the user control and not to it's BackgroundImage property. Here is what is got so far:
Code:
Public Property Image As System.Drawing.Image
Get
Return Me.BackgroundImage
End Get
[code]....
As you can see, for now, i have to use the BackgroundImage property but i want to image to be placed on the controls surface, so that the image can be manipulated, like drawing game tiles on it or image processing. The user control doesn't have a real image property?
I have a For Each block loops through a list of objects, the objects are all instances of a single custom class I have made which has multiple properties.The logic used in this block uses a property of the custom class to do a set action, is it possible to dynamically supply which property it uses in the logic? This will be more efficient and prevent me from having to create this logic over for each property of the custom class.My best guess was that maybe it is possible with reflection, however my searches into reflection have left me more confused.
View 2 RepliesWhat I want is a property that like Font property, it has "Name", "Size", "Unit", "Bold" and the other property in it. I tried the solution in the post I tried the solution like this:
<TypeConverter(GetType(ExpandableObjectConverter))> _
Class TestingClass
'Some property here
[code]....
I have a custom class named Location with multiple properties.
[Code]....
How can I get the value of each p.Name and return "Main St", "AnyTown" o "USA"
We have a Windows.Forms.PropertyGrid control that we use to edit application settings. We expose the application settings through a class, giving each setting attributes to control the appearance. An example property definition is shown below:
<DisplayName("Snap Tolerance"), _
Category("Tolerances"), _
Description("The distance (in Points - 1/72"") to be searched for snap points.")> _
[code].....
I am trying to create a settings class.The Property Test() is a list of strings.When I add a string such as: t.test.Add("asasasAAAAA")I want it to autmatically turn lowercase. using t.test.Add(("asasasAAAAA").ToLower) will not work for what I need. [code]
View 2 RepliesI've created a custom control in VB.NET on .Net 3.5, in VS2008, which contains a load of custom properties, including RSS feed address, proxy address and proxy port.This control is an RSS ticker, which works really nicely, but doesn't initially run at all, and from stepping through my code, this is because none of my properties are being passed data from the containing form, until after the control has been initialised, and the code behind the control has run. The code (relevant bits) looks as follows:[code]
View 2 RepliesHow to get a property to persist after its been changed dynamically during run-time? When Visual Basic reverts back to the IDE, the property goes right back to its original value.
View 3 RepliesI have a custom control. I need to add a property, say, Comparison, to the control. The property should be set at design time using a dropdown. The Dropdown will have String values like '=','>','<' etc.
I tried using Enum values and working perfectly but I need to do some extra coding to convert the Enum values to the string I required. It would be great if I can get the values from the dropdown so that I can directly use the selcted value.
i read an article about datacolumn.expression property here [URL]. this is really great. but i was just wondering, for my case i want to use my custom function to use in the expression. basically, on my datatable i added an unbound column AGE. when i display records, i just want the age textbox to be populated with the computation of the person's age based on birthdate.
View 7 RepliesI am creating a custom graphic control and I'm stuck. I have three classes -
Protected Class ControlBase' Handles common properties and onpaintPublic Class ImageControl Inherits ControlBase' handles Image propertiesPublic Class TextControl Inherits ControlBase' handles Graphic Text properties
I also have a private enum ControlType and Public property for that enum. My goal is to have either a TextControl or a ImageControl created based on the ControlType. Since this property is outside of those two classes and the base - where do I put this property and how do I call up the correct class?
I am creating an Extended DateTime picker. I have created a Class the inherits the Default DateTimePicker and Adds a new Property NullableValue. I have placed the control on a form and bound it to a Binding Source using the NullableValue Property. When I load the record the control updates as it should. But when I change the value and save it does not save back to the database.
[Code]...
I have created a custom Server Control and I want to add a description to the properties and events that the control holds. I have looked over the Internet and came up with the following.[code]Unfortunately this does not seem to work in visual studio .net 2008.
View 1 RepliesI have a custom version of a label control (built using a user control). While working in the designer, I want to intercept the setting of the Name property (in the properties panel) and use it to generate the Text property. That is, if I enter "lblFirstName" into the Name property of the properties panel I want to immediately see that the Text property is set to "First Name". Parsing the Name property is not the issue; I can do that.
I have tried to overload/shadow the Name property (since "Overrides" is not allowed) to essentially add this "aspect" to our custom label control but it doesn't seem to hit the Shadowed method at design time. It does hit the Shadowed method at run time if manipulated via code. The point is to avoid double the work as the label text and the label name are essentially the same. The only difference is one is formatted to be human friendly and the other machine friendly.
<System.ComponentModel.Browsable(True),
System.ComponentModel.ParenthesizePropertyName(), System.ComponentModel.DesignerSerializationVisibility(System.ComponentModel.DesignerSerializationVisibility.Visible)>
Public Shadows Property Name As String
[Code] .....
This may be a matter of picking the right attributes. Conversely, if it's an easier alternative, we could allow setting the Text property to set the Name property. I doubt this would be easier since it should also reflect the new name in the Designer.vb code, not just in the label's Name property itself.