Bind Textboxes To A Stack?
Apr 14, 2009
I just started programming in VB.NET 2008 with the Express edition and have been having a blast so far. I thought a fun program to try and make would be an infix to postfix program.
I have five text boxes off to the side of my program that shows what is on the stack as you iterate through the equation. I'm wondering if it's possible to make these textboxes set to display what is at a certain index of a stack.
For example, if I pushed a "(" onto the stack, I would like the top box of my textboxes to update and show a "(". When something else is pushed onto the stack, say a "/", I would like the "(" to be displayed in the second box down, and the "/" to be displayed in the top box now.
View 1 Replies
ADVERTISEMENT
Apr 12, 2011
I have this form filled with data using dataset, data adapter
1 Dataset , 8 data adapters
Textboxes are ok and binding .. fills by 1 data adapter
ComboBoxs are filled by 7 data adapters
The problem is 6 ComboBoxes data is from one table filtered by id1 i.e.:
cmb1 : select id2,content from table2 where id1 = 1
cmb2 : select id2,content from table2 where id1 = 2
cmb3 : select id2,content from table2 where id1 = 3
........
Now how can I bind all ComboBoxs with textboxes?
View 3 Replies
Apr 10, 2008
On one of my forms i have a datagridview binded to an Access database. It displays only first and last names of my customers in a datagridview.What i want to do now is, when i double-click on one of the customers another form will open and display details for this customer (detailed view - textboxes).
What i have accomplished so far is that when i double-click on a customer in datagridview a form opens with details (linked to the same binding source as datagridview). But the problem is that it always opens the first record even if i dobule-click second or third in datagridview.I don't know how to bind these textboxes with current datagridview position?
View 1 Replies
May 7, 2010
I have a form called studentForm which has a studentCombobox, studentTextbox and a studentDatagridView
In the constructor of the studentForm I need to bind studentCombobox to the StudentbindingSource of the main form and to bind studentDataGridView to appropriate binding source in the mainForm.So that this datagrid view displays all the bookings for the studentID currently selected in studentComboBox
studentComboBox.DataSource = MainForm.StudentBindingSource
studentComboBox.DisplayMember = "StudentID"
studentDataGridView.DataSource = MainForm.StudentDataSet
studentDataGridView.DataMember = "Names "
This is the code I wrote in the constructor
View 7 Replies
Feb 28, 2011
I am trying to bind my SQL param's qurey to bind to a table. My problem is i get this error "Fill: SelectCommand.Connection property has not been initialized."
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
If RadioButton3.Checked = True Then
Dim connectionGrid As SqlConnection = New SqlConnection("Data Source=BST;Initial Catalog=dsfs;uid=dfsdf; pwd='dsfsf'")
Dim commandgrid As SqlCommand = New SqlCommand()
[code]....
View 2 Replies
Oct 14, 2011
On my form, i've got some textboxes and some richtextboxes. I'm using the following code, to search through the text properties of each of the two types of control. see below:-
For Each ctl As Control In Me.Controls
If ctl.Text = "7777" Then
ctl.Text = "found the sevens"
End If
Next
What i'd like to do is isolate the textboxes only, is there a way to do that? I tried this but i got an error:-
For Each box As TextBox In Me.Controls
If box.Text = "7777" Then
box.Text = "Found"
End If
Next
View 2 Replies
Sep 2, 2010
I'm currently developing an application with a reasonably complex DataGridView that allows the user to build the lines of a sales document: Quantitiy, Description, Price, etc with some additional fields to help calculate price based on cost or discount i'm sure you get the jist - all this means we're not just diplaying data but adding and manipulating it - It also means there's mainly decimal fields, nit just simple text fields
Now, i'm new to VB.net, so i've perhaps done things a bit backwards during my learning curve, namely designing and coding my DGV before creating the underlying database table and binding to it - so as i'm sure you can image there's a bit recoding to do to allow for the fact that it's now bound to a datasource.
I'd got the DGV working just how a wanted it to, but now that i've bound it to a datasource i'm hiting multiple problems with: Formating the appearance of figures in the DGV Problems with blank fields while enering data (before the i try to save the data back to the database) How the DGV is functioning - it seems to behave differently when adding lines to a new sales document than it does when adding lines to an existing sales document
And given that when saving edits to an existing line i need to provide a valid update command i'm begining to think that it might be easier to scrap the databinding altogether and just Select, Add and Edit the database with code rather than binding the DGV in the IDE
I've read various threads about avoiding databinding due to it's limitations, but i've also read that it's far better in later versions of Visual Studio and .net. and i'm using VS2010
I'd just like some advise as to whether my gut feeling is right or whether i should persevere with databinding the DGV. i've noticed some quirks of databinding while working with other controls such as text and combo boxes, but i've overcome these and the result seems to be easier than coding the data transfer manually.
But i'm really struggling with databinding the DGV and the fact that i'm dtatbinding to a seperate table to the rest of the controls is leaning me away from databinding
View 4 Replies
Oct 21, 2010
My goal is to, Pull information from a websight's textboxes in IE into my program textboxes. and to later Put changes from into other values on the websight from my program into it. The sight has multiple textboxes, on different frames. within it.I need to keep it as a exsiting open browser instead of making a new one. only gotten as far as finding the open internet explorer window, by useing
[Code]...
View 2 Replies
Oct 13, 2009
In your actual programming experience, how did this knowledge of STACK and HEAP actually rescue you in real life? Any story from the trenches? Or is this concept good for filling up programming books and good for theory?
View 6 Replies
Mar 10, 2010
What I want to know is that in VB.net is it possible to get a stack overflow, and if so how is it caused. What I mean is, what sort of written code would cause a stack to overflow.
View 2 Replies
Apr 21, 2011
I need to write a VB.NET code to reverse the given characters using a stack.Input: 'S','T','A','C','K' So far I have input the letters, but I don't know how to get the console to reverse it. I'm a beginner to programming so please excuse my ignorance.
Module Module1
Sub Main()
Dim StackObject As New Stack
[code].....
View 4 Replies
Apr 15, 2009
I've started using .Net's stack collection. The basic features I guess are the "pop" and "push", where you add or take off the top element of the stack (if you are referencing other elements in the stack then another collection type is probably better).[URL]..it appears that the Stack collection (like other collections) is basically an array with some window dressing (so you actually can see other elements). As far as I can tell, "popping" and "pushing" is changing the first element of the array. Shouldn't instead the final element be the "top" of the stack and be the one that is changed? Otherwise the program has to reindex all the other elements in the array every time a pop or push is made. This seems very inefficient. But this is what Microsoft's description appears to be saying what is happening.
View 10 Replies
Jun 22, 2009
My problem is that i need log the stack call. I know that i can put a breakpoint in code and choose the debug menu option "call stack", But that is not a solution for me, because i need all the methods called by the application, not only the last until the breakpoint.
View 3 Replies
May 11, 2010
I did alot of work then I suddenly get this error message
View 2 Replies
Jan 7, 2009
We have this funky little ObjectDisposedException happening now and again. But only on production machines, of course ... can't recreate the issue on my dev unit. So I trotted on out to the Microsoft site to see what members of this exception I could use to figure out what's going on. Microsoft says that one of the members is StackTrace. I double and triple checked that I'm looking at .Net 1.1 information as I'm pretty sure that's what I'm using (how can I check that?). Here's the page I found - [URL]
So I go back to my program to write something useful to the event log so I can figure out what's going on. And when I look at the members of the ObjectDisposedException available to me I only see the following: GetBaseException, GetType, InnerException, Message, ObjectName, ToString.
what happened to my StackTrace member? I sure could use it if I could figure out how to get to it.
View 6 Replies
Oct 23, 2010
As a learning experience I decided to try and implement the Shunting Yard Algorithm(string calculator) using OOP. It was successful for as far as I took it, but it had one flaw. In order to get the stack to be accessible from the operators I had to declare it as shared, which meant that all versions of the calculator shared one stack. This very short piece of code illustrates what I came up with and the "flaw". [code] How can I maintain the functionality of anOP.add1 without declaring "something" as shared?
View 9 Replies
Oct 31, 2010
this exception gets raised on a standard dim command???
Public Sub Life(ByVal AnyEvent As Object) Dim myNewLife As New Life Dim Happiness As New Collection Happiness.Add(AnyEvent) myNewLife.Experience(Happiness) End Sub
[code].....
View 2 Replies
Oct 24, 2011
I want to put a two dimensional array into a stack and then check the stack to see if it contains the first dimension of the array. Is there any way to override the contains function to do this.
Example:
Dim MyStack as stack
Dim sItems(0,2) as string
sItems(0,0)="Error 1"[codee].....
View 7 Replies
Oct 27, 2009
I'm writing this program in Visual Basic .NET to organize different fields of data, and I'm using profile slots through application settings to store the data for users. But, I ran into a stack overflow error in my SlotSelect.vb class. My best plausible guess for why this happens is that I'm using the wrong kind of variable container in the below sauce code, but my dilemma is that I don't know what specifically is going wrong.The code that the vshost is saying is the cause for the overflow was written from some code that I looked up on MSDN and other places for referring to objects in other classes, and I tried using other variants of it to see if it was any different. So far, nothing has worked, and it doesn't stop the error while compiling, much less in the code markup--it only catches it when it starts the application in debug after it finishes building
View 7 Replies
Oct 2, 2010
I'm implementing multi-level undo/redo via a pair of stacks. This works well, but I'd like to limit the number of undo actions (actually objects representing the state of the application) . Once the limit of actions in the stack has been reached, I want to keep adding actions to the stack, but get rid of the oldest (bottom) items as I go.
View 3 Replies
Feb 15, 2012
I am trying to add (Push) whatever the user enters in (MyStack) into 5 different labels that should show the (UserResponse). The problem is I don't know how to display each element in a different label. For example:
- The first element that the user enters (UserResponse) should be in Label1
- The second element that the user enters (UserResponse) should be in Label2 etc.... up to label5.
Also, when I press (Pop) the elements should disappear (Last in first out).
Public Class Form1
Private MyStack As New Stack(4)
Private Sub ButtonPush_Click(sender As System.Object, e As System.EventArgs) Handles ButtonPush.Click
[Code].....
View 2 Replies
May 12, 2011
In the context of the CLR in .NET how is stack space allocated and what is it typically limited by? For example: Can any given thread continue to add to the stack until memory runs out? If not; how does the CLR decide how much space to allocate and can it change its mind?
PS: Just to put some context on it this all started from a discussion on how to build a method that will calculate the Fibonacci sequence and one of the suggestions was a recursive function.
View 1 Replies
Apr 27, 2011
The following code (calling proc DiskFreeSpace) throws an "unbalanced stack" error message.
Private Declare Function GetDiskFreeSpaceEx Lib "kernel32" Alias "GetDiskFreeSpaceExA" (ByVal lpDirectoryName As String, _
ByVal lpFreeBytesAvailableToCaller As Long, _
ByVal lpTotalNumberOfBytes As Long, _
ByVal lpTotalNumberOfFreeBytes As Long) As Long
[code]....
Additional note: My function does need to work for UNC paths also (local and/or network).
View 2 Replies
Mar 24, 2011
I am trying to make a calculator to calculate how many sheets of a product of varying thickness to put into a stack and how many stacks are required to make a whole pack, taking into account that some packs have no cover sheets and some have one at the bottom only and some have top and bottom.
As you can see there are a few variables and to make it harder is the way the stacks are made. No stack can be over 180mm and the last two stacks are halved to make the last two an even height (roughly).
I have a For Next loop and this would be okay if it wasn't for the 2 odd stacks at the end and the cover sheets.
This is what I have anyway.
CB = txtBottomCB.Text
lstDisplay.Items.Clear()
MaxBookHeight = (txtBookHeight.Text)
[Code].....
View 5 Replies
Feb 12, 2012
could you tell me, why I get the stack overflow error on this code?
Dim ev As Double = datum.Year * 365 * 24 * 60 * 60
Dim honap As Double = datum.Month * 30 * 24 * 60 * 60
Dim nap As Double = datum.Day * 24 * 60 * 60
Dim masodpercek As Double = ev + honap + nap
The double datatype should be enough.
View 5 Replies
Jun 27, 2010
This code worked fine in WinForms under .NET 3.5, but since I've started using WPF and .NET 4.0, it no longer works (although I'm not sure if this is a coincidence or not). The purpose of this is to detect if a mouse button (or multiple mouse buttons) is being pressed outside of the application.[code]...
View 7 Replies
Dec 10, 2011
I have created quite a few web chats using VB.NET and ASP.NET and I'm just wondering how Stack Overflow handles messages being sent back to clients. Because web can only make requests and get responses back once, how does Stack Overflow handle messages? In my implementation I have a recursive loop that gets called every 1 second and makes an Ajax request to the server to get the latest messages, but I am thinking of using web services
View 2 Replies
Jan 28, 2011
Has anyone found a way to view it numerically?Im sure that for a multithreaded program that a seperate user stack is maintained for each thread?Inevtably. there will be the dunderhead who asks what I am doing. Im in the last stages of developing a multithreaded filescanning program. The program uses a fairly tight loop.
View 5 Replies
May 26, 2009
I am using the stack class to store a collection of lines. <code>Dim myStack As New Stack(Of Line)</code> I want to find out what the index is of one of the lines that are in the collection and I'm not sure how to do this. i tried to use array.indexOf:
[Code]...
View 7 Replies
Jul 15, 2010
In VB .NET, I know I can get a stack trace by looking at the value of ex.StackTrace when handling an exception. How can I get the functions on the stack when I am not handling an exception? I am looking to implement a logging system of some sort to record the steps the user takes prior to a crash to assist in debugging.
View 3 Replies