Bitwise Property Values In Designer?
Aug 24, 2009
I have an abstract user control(baseModule) that has a property that I plan on using a bitwise comparison on to determine what export types are supported by that module. In the designer of a module derived from baseModule, I am presented with a combobox with the ability to just select a single value (Html, Xml, etc.) I would like to be presented with a drop-down checked listbox so I could select which values I want.How can I accomplish this inside of VS2008? I've seen other properties support this.
Public Class ExportTypes
Public Enum ExportType
Html = 1
Xml = 2[code]......
View 1 Replies
ADVERTISEMENT
Nov 14, 2011
Ive recently written a control called a ButtonRow in VB.NET that allows you to dynamically place buttons on it through a typed collection property. The property itself is tagged with the <DesignerSerializationVisibility(DesignerSerializationVisibility.Content)>. However it works really bad. First of all, whenever you add buttons to it and you delete the controlafterwards, the designer code file still have the buttons declared but without the aButtonRow to who's collection they would be added. Secondly, you cannot copy the controlfrom one form to another. It would just copy the ButtonRow object without the buttons
View 6 Replies
Aug 2, 2010
I have some related Properties in a class. Namely, One is a collection of objects and the other is an index to the one that the class instance is looking at. In the designer, I need for the collection to be set prior to the index. I tried to do this manually, but when the file is saved, the Designer goes back and writes over my change. So I need to know how to tell the designer in which order to set the properties.
View 2 Replies
Dec 14, 2010
I am working in VB.Net 2010 framework 2.0. Suppose i declares a property
[Code]....
In the form designer, the property "MyColor" will be seen the value as 150, 145, 145. I want to see this value as "NewColor" in form designer. This is the same like ControlDark, ActiveBorder etc. system colors. I want that instead of the color value, designer should show the variable name. The .Net framework also use the above implementation for System Colors and same i want to do.
View 5 Replies
Dec 17, 2010
I am working in VB.NET 2010 Framework 2.0.
I don't want to allow some properties from going into form's designer file but the those properties will present on the form(property grid). The behavior of these properties will be same always.
I used the following code:
<DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)>
Public Property GradientBegin() As Color = Color.Red
But the problem I am facing is that -> on the property grid after changing the "GradientBegin" color to other than RED and compiling the program, it is replacing the new changed value to RED again. So I am not able to change the color actually.
View 2 Replies
Dec 17, 2010
I am working in VB.Net 2010 framework 2.0. I don't want to allow some properties from going into form's designer file but the those properties will present on the form(property grid). The behavior of these properties will be same always. I used the following
[Code]....
But the problem I am facing is that -> on the property grid after changing the "GradientBegin" color to other than RED and compiling the program, it is replacing the new changed value to RED again. So i am not able to change the color actually. How can i achieve this?
View 8 Replies
Nov 25, 2011
I want to add a List(Of Book) property to my user control. I defined a Book class and BookCollectionEditor class for CollectionEditor. And also I defined a public property named BookList for my user control. For a custom control it works fine but for user control, the designer does not display my property. On markup I can add a Book item but on designer it gives error: "Type 'System.Web.UI.UserControl' does not have a public property named 'BookList'."Isn't is possible to define a list property for a user control?
<TypeConverter(GetType(ExpandableObjectConverter)), Serializable()> _
Public Class Book
Private _name As String
Private _author As String
[Code]...
View 1 Replies
Sep 16, 2011
I have written a Visual Studio 2008 addin that adds controls to a Form. I want some of those controls' Visible property set to False so they're hidden during runtime, so I do this:[code..]
This doesn't work. Not only is the control invisible in the designer window itself, but the Visible = False code doesn't even make it into [FormName].designer.vb. I have tried forcing Serialization on the Visible property like so, to no avail:[code...]
View 1 Replies
Aug 17, 2011
I have been making a control and have added a property for a list(of CustomClass). The custom class contains a string, an image and a list of another custom class which contains a string and an image. I have added this property to the designer by adding the browsable attributes and all appears to work correctly with this.
My problem comes when running the program. I can set all of the values within the property and I can go back to them and they are saved, however, as soon as I run the program, the values are wiped out as the property is set to Nothing.In order to allow my property to be edited and saved, I realize that I must initialize the list and have done so in the accessor method of the property (if the property's value is nothing).
I have modified the values in the designer and placed a breakpoint on all of the items which use the property and it's underlying field, as well as on the property's methods itself. The first breakpoint hit is of it being accessed and the value is always nothing.
I'm not sure where the values are supposed to be stored as I have checked the designer code where it would normally store types such as strings and I have checked the resources to see if they have been saved there (like an image would be). After running the code, the values in the designer are wiped out also.
[Code]...
View 1 Replies
May 31, 2012
I am using Linq to Sql that generated a data contract for a table. I have a date field in that table which is a non-nullable field. I need to override the auto generated property of the date field to return a specific value, something like [code]Is it possible to override an autogenerated property in the designer.vb file using a partial class? I dont want to create a new property as it is currently being accessed in n number of places and I dont want to change it in every place.
View 1 Replies
Jul 29, 2009
I'm creating a UserControl that draws a simple radial gauge. I need it to be very customizable; the user should be able to customize everything such as the colors, fonts, sizes. So, I just made a property for every customizable detail. For example, I had ScaleFont, ScaleColor, ScaleStart, ScaleEnd, ScaleInnerRadius, ScaleOuterRadius, ScaleTickmarkFrequenty, etc.. etc.. etc...
Because there are so many properties about the same subject, I wanted to 'group' these properties into one "property". I've seen this done loads of times in third party controls, but I've never done it before myself.The idea is that the properties can be accessed like
Me.Gauge1.ScaleSettings.Start = 10
Me.Gauge1.ScaleSettings.End = 80
...
So far, I tried creating a class for each group, for example a clsScaleSettings class, containing properties like Font, Color, Start, End, InnerRadius, OuterRadius, TickmarkFrequenty, etc (corresponding to the same properties as above).
Then, for every 'group' or class, I create a Property. For example, I have the ScaleSettings property, which simply returns an instance of the clsScaleSettings class (I initialize the instance only once of course):
vb.net
Private _ScaleSettings As New clsScaleSettings
Public Property ScaleSettings() As clsScaleSettings
[code]....
Now, this works in the code editor. I can now use
Gauge1.ScaleSettings.Font = Me.Font
for example, and it sets the font correctly.But, I does not work in the designer, in the Property Grid. The whole reason I made the effort to move and rename nearly all properties (about 70!), and all references to those properties, to separate classes, was so that the user could design the gauge more easily using the Property Grid!Instead of having 15 settings related to the scale, scattered all over the Property Grid, he can now have one ScaleSettings property, which he can expand, and then he can edit the properties of that group easily.The ScaleSettings property is greyed out in the property grid... So I cannot expand it and view it's underlying properties.
View 16 Replies
Sep 21, 2010
I'm writing a custom control and I want to add a "MessageText" property of type String:
<Browsable(True),
DefaultValue(""),
Category("CustomControls"),
[code]....
The MessageText property is a multiline text, and the user must be able to set the text using the designer. The problem is that the designer doesn't allow to enter a newline directly for a string property.I want the same behaviour as the system TextBox's Text property, where you can click on the down arrow and write lines in the small text-editor that appears:How do I do that?
View 2 Replies
Jun 17, 2012
Long story short I made a form in VB.Net project which involves lots of icons and images. My problem is when I build my project, and then go back to that form, suddenly errors showed up.
The errors says : "The type 'MyProject.MyResources.Resources' has no property named 'myicon'". Just to be clear, it worked fine before I did the build, and it happened to every single images I have on Resource.
When I chose "Ignore and Continue" all of the images I used are gone. I tried to googled it, some says to delete my .exe file on Application/Bin/Debug folder, which is working. But this issue has been some kind of an annoying one, since it happens again every single time I build.
View 1 Replies
Jun 14, 2012
This is a WinForm VB.NET application. Please see the picture below:How to add a line break in a multi line textbox in Visual Studio designer's property section?I tried using abc & Environment.NewLine & def but that was not working.
View 2 Replies
Jan 27, 2011
I am attempting to update an existing winforms application, that was created with a dataset control on all the winforms pages. I have ported it from VS 2008 to VS 2010 and I need to update the database section and connect it to the SQL backend using traditional code method.In the Solution explorer, when I click on the Dataset files, and click "Exclude From project" I am unable to build the project.Is it advisable to comment out the code lines that refer to the dataset in the .designer.vb files?
View 1 Replies
Dec 30, 2010
result = SendMessage(buttonhandle, BM_GETSTATE, 0, 0)
buttonChecked = (result = BST_CHECKED)
Now I want to know whether the bit for BST_CHECKED is turned on or not.
How would I do that?
I can do
buttonChecked = (result % 2 = BST_CHECKED)
Is there a better way?
View 2 Replies
Jul 21, 2011
Original Code (VB.net): curStyle = curStyle And (Not ES_NUMBER)
Changed Code (C#):
curStyle = curStyle & (!ES_NUMBER);
But it is giving me this error: Operator '!' cannot be applied to operand of type 'long'ES_NUMBER is of data type long.I tried changing it to int, string, etc. All doesn't work.
View 4 Replies
May 15, 2011
When I run this command in PHP, I get:
[Code]...
The interesting thing is, that when I try to shift any number greater than int32 in .net, it yields bad results.. Every number under int32 (2147483647) yields the same results from php and c#.net or vb.net Is there a workaround for this in .net?
View 2 Replies
Dec 29, 2010
Did anyone else read this article under Visual Basic News? I thought it was a very bad treatment of the subject. I especially don't like articles like that when the code they post relies on Option Strict Off.
View 12 Replies
Oct 28, 2010
I want to perform a bitwise-AND operation in VB.NET, taking a Short (16-bit) variable and ANDing it with '0000000011111111' (thereby retaining only the least-significant byte / 8 least-significant bits).
View 3 Replies
Aug 9, 2011
According to MSDN The And operator can act as a bitwise operator OR a logical operator.The only way to know if it is used as One operator or another is, If it is on the right side of an assignment operation? for example x = 3 AND 5. I cannot find any other instances where the bitwise operator would be used instead of the logical operator, are there?
View 1 Replies
Sep 13, 2009
How do I bitwise shift right/left in VB.NET? Does it even have operators for this, or do I have to use some utility method?
View 4 Replies
Jul 19, 2010
I'm re-writing some old application in VB.NET to C# and ASP.NET 3.5. Everything is going OK but I have this problem - and, as the database will not be changed, I must find a solution to it.The old app saves the list o desired days (from Sunday to Saturday) in a byte. This is the way it do it:
If chkDaily.Checked Then
daysBitmask = 127 ' This is for a full week
Else
[code]....
View 1 Replies
Jun 14, 2009
m_ArchiveBoolean, m_HiddenBoolean, m_ReadOnlyBoolean, m_IndexedBoolean, m_CompressedBoolean are all form level booleans that's set from their appropriate Checkboxes on the form before this code runs in a BackgroundWorker.
Why is it that this code works:
Try
Dim fi As New FileInfo(element)
With fi
If m_ArchiveBoolean = False Then
[code]....
In this 2nd one attributes are being changed, but they're the wrong ones and I can't pinpoint it right off hand.
Edit: What the overall goal of this is that if the user has the attribute checkbox checked then the file needs to have it set, other wise the attribute (if it's present) needs to be unset.
View 7 Replies
Dec 4, 2011
I am trying to combine three Byte values to one Long value, like System.Drawing.Color.ToArgb() does.
I've looked up reference source code to find it and converted it to VB .NET:
Return CLng((CInt(red) << 16 Or CInt(green) << 8 Or blue Or CInt(alpha) << 24) And -1)
It works fine of course, but I don't really understand why alpha shifted by 24 is last, not first (so it would be in nice order 24, 16, 8). I don't really understand bitwise operations a lot. Also, this code snippet works for 4 bytes, which is redundant for me, I need just three bytes and I wonder if Long is still required when bytes are only three, wouldn't Integer do just fine in this case?
So, my question is, how do I rewrite this code to work with just 3 parameters? Do I need to use Long? And, I know this is silly, but is it possible to make byte shifting in order 16,8,0 instead of 16,8,0,24? It's really just aesthetics, but I am awful perfectionist.
View 3 Replies
Mar 1, 2010
This work nicely
Public Const test As ULong = 1 << 30
This doesn't work nicely
Public Const test As ULong = 1 << 31
[code].....
View 2 Replies
Feb 16, 2011
I have written a simple VB.net application which saves information to an RFID tag. I am now trying to compress my data. The solution I have come up with involves bitwire operation.Basically I store 2 numbers per 1 byte (0-9, 10 being a period, 12 possibly being a negative/positive flag,13,14,15 unused as of yet).The code I am using basically shifts the byte containing a number left, 4 spaces, then 'OR's it against another number.Therefore 12 is now represented as 00010010. The problem i'm having is decompressing. Obviously getting the '1' back is easy, as I just shift right 4, then grab it. I need to append or remove the last 4 bits.My solution after many headaches was to reverse the bit order, shift left 4, then reverse, then tostring it.
View 17 Replies
Jul 3, 2010
m_ArchiveBoolean, m_HiddenBoolean, m_ReadOnlyBoolean, m_IndexedBoolean, m_CompressedBoolean are all form level booleans that's set from their appropriate Checkboxes on the form before this code runs in a BackgroundWorker.
Why is it that this code works:
Try
Dim fi As New FileInfo(element)
[code].....
View 9 Replies
Jun 14, 2010
I've got a property MyEnumProp which is displayed in a property grid. The property is of type MyEnum. So all entries of MyEnum are available in the propertygrid to select.Now i have a second property and based on its value i want to limit the values available in the propertyGrid for MyEnumProp.Is there a way to accomplish this?For instance: The following 2 Enums are defined in an Interface:
Enum Country
England
France
[code].....
View 5 Replies
Nov 1, 2010
I am still quite new to VB, and the whole OOP concept (Self-taught), I haven't coded in 30+ years, so I have a great deal to learn/relearn. I hope my ignorance is not too apparent.I'd like to set property values with the same names as the controls of a form to the value of the forms text (or checked or whatever) value. It appears that the 'Parent.Controls' statement below is doing what I want, but I can't seem to get this to work. I don't know if I should be using a structure for this, but I hope it demonstrates my intensions.
[Code]...
View 7 Replies