Trying to upload a picture file from an online source and store it in a byte array but am having the error: "Number of Indices is less than the number of dimensions in the indexed array".
Dim Bytes() as Byte
Dim Inet1 as System.Net.Webrequest
"Number of indices exceeds the number of dimensions of the indexed array."
and
"Array bounds cannot appear in type specifiers."
i tried to implement DES with ECB mode but without using lib framework and i have an error in this line
Public Sub New(ByVal boxNum As Integer) table = TABLES(boxNum)End Sub
I'm upgrading my VB6 project to VB.NET and I found one of the problem below relating to dimensional array.Here's my VB6 coding :
Private Function ConvertMatrixToBase0(ByVal MyMat() As Double) As Double()
Dim i, j As Long
Dim ConvMat() As Double[code.]...
When i port it over to VB.NET, i encountered error message 'ReDim' cannot change the number of dimensions of an array. for the line highlighted in red. And I suspect that VB.NET need to always define the exact dimension of the array during the declaration. But for the function above, for the array of 'MyMat()', I do not know what is the exact dimension every time it runs, and that is why i need to check the dimension of the array.My question is do we have any solution in dealing unknown dimension array in VB.NET? As in VB6, we can just define Array() instead of Array (,) in VB.NET.
The code below is the entire class that has the error in it... the errored code is highlighted in red. The error is,'ReDim' cannot change the number of dimensions of an array.
Code:
Public Class clsMap
Dim SR As System.IO.StreamReader
Public Width As Integer
Public Height As Integer
[code]....
I have ran into a problem that I don't know why it is coming up as an "Number of indices is less than the number of dimensions of the indexed array." error. I thought I have it correct but not...
'Create XML header
builder.subAddTagTopLevel("?xml version=""1.0""?")
builder.subAddAggregateTagOnly("QXXML")
[code]......
Public Sub LoadFromFile()
Dim sr As New StreamReader("CoverageArea.dat")
Dim strAreaLine As String[code].....
I have a question about that strAreaInfo()...I left the () with no number in it so that it wouldn't have a set # of values, and then I tried to give it 3 values, but I get the error in the title. Am I doing something wrong when I declare it?
I have an array declared:
[Code]...
This statement works fine in ASP, but when I switch to ASP.Net, it give errors 'ReDim' cannot change the number of dimensions of an array.
I have this recently converted application from vb6 to vb.net 2008. One of the errors stated is:'Point' is not a member of 'System. Windows. Forms. PictureBox'.I have searched and not found an alternative to this.Also, it says ReDim cannot change the number of dimensions in an array.
View 8 RepliesI need to write a program that requests a high number and a low number from the user, then the program searches the array and finds all elements within the two numbers. The program is used to search for past presidents, so if I type 43 for low number and 44 for high number, the program will display:
George Walker Bush
Barack Hussein Obama
I think I have an idea of how to search up to a certain point, but not to stop at a certain point....Here is the code that I have for that particular sub procedure:
Quote:
Private Sub btnDisplayRqst_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayRqst.Click
Dim sr As IO.StreamReader = IO.File.OpenText("PRESIDENTS.TXT")
[CODE]...
I am doing a bar cash register and I want to use a if statement to see if fosters button and number 1 on the number pad are both pressed then multiply constant by quantity number
View 1 RepliesI am getting the error in the code below ....
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim prasha As New Person("Prashanthi", "Acharya")
Dim mallika As New Person("Mallika", "Upadhya")
[code]....
how to upload file using fileupload control into sql database. I have class where i created insert function and getting info frm the .aspx.vb file
Class File
========
Imports System
Imports System.Data
Imports System.Data.SqlClient
[coe]....
Part of my assignment is to check if input to Group Number and Number of Units are correct input by making error handling exceptions...
I have to check the following:
a) group number is neither 501 nor 062
b) number of units are NOT numbers
c) number of units is NOT a positive number
So my first question is, am I checking correctly? 2nd question is, How do I make sure my Exceptions will pertain to their correct respective things (a, b, and c.. above)?
[Code]...
I have a problem using FJ Core to convert image into byte.
I have a code written in C# which works fine.
The problem is when im running it in VB i get the exception: Arithmetic operation resulted in an overflow
It works fine in C# to convert a negative number into byte For Ex. (byte)-90024 = 88
But when i try to do it in VB i get the exception.[code]...
I am totally new with VB.NET. I have started coding for Modbus protocol. The response that I receive from the slave is as below -
01 = byte slave id
03 = byte function code
04 = byte -no. of bytes sent by slave
00 = byte(8 bits) (Lower Register MSB)
00 = byte(8 bits) (Lower Register LSB)
64 = byte(8 bits) (Upper Register MSB)
00 = byte(8 bits) (Upper Register LSB)
2bytes for crc
Now I want the value of 64 00 00 00 into floating point number in Vb.net . I think in vb.net its single as its 32bit floating precision number. Now the bytes that I need are 00 64 00 00 but if i process in this way the output is different, so I tried manually putting the data into the byte array and found out that I need 64 00 00 00 to be processed so that i can get desired output.
I need to send a number as a byte (0-255).
SerialPort1.write(123)
sends 3 bytes representing the numbers 1 2 and 3. I need to send 1 byte containing 123.
I understand the concept of bytes and declaring variables to save on processing space. I understand that the max value that can be stored in a byte is 255. I cannot seem to wrap my head around my current issue. I don't have much experience working with byte manipulation.
[Code]...
How can I insert a negative number into a byte parameter?
Something like this:
Dim b As Byte = -111
Code.
Public Function comb1(ByVal SName As String) As DataTable
Dim dt As New DataTable
cmd = New SqlCommand("Select Distinct RName from tb_RS_New", con)
[Code]....
While loading the page, the error was thrown as "input array is longer than the number of columns in this table"
I have to search within an array and display the number of occurrences that a value within the array appears. I know that my code is incorrect but this is what I have so far. If anyone can point out what I am doing wrong that would be great.
Private Sub btnResult_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnResult.Click
Dim intSearchAmount As Integer
Dim intCounter As Integer
Dim intIndex As Integer
[code].....
I have a problem with a sql query. Through the query I am trying to search database for any occurrences of string (can be anything) in a column using the SQL LIKE command. The problem is that it works fine for most of the strings say john, jim, ji"m , but does not work when i include the following characters which are ( ' , { , } , and a single quotation mark). MYSQL query takes care of these special cases by putting them in [] block whenever user enters them .But i am getting the following error when i go to query the database using the GetSelectCommand() in VB.NET
Exception Details: System.ApplicationException: Number of values provided must be equal to the number of placeholders in query.I have checked the query over and over again .. but its fine .My database server is Sql Server 2008.So my application throws the exception in this command:
Using reader As MustDisposeDataReader = _
pmSystem.DatabaseManager.GetSelectCommand(selectStatementBuilder.ToString(), New Object() {})
Where MustDisposeDataReader is an instance of a class in an internally developed library, which inherits from System.Object. pmSystem is an instance of the class PlanManagerSystem which implements the commandlayer. GetSelectCommand() takes the select command
I got most part correctly but the only part isnt working right is when the last 5th digit match the sum number at the last number.
Private Sub btnVerify_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnVerify.Click
Dim strCardNum As String
Dim strSumNum As String
[CODE]...
I am trying to filter a dataset using a number different inputs, selected by a number of check boxes. I have all the text base rowfilters working, but I can not make the date filter work unless I hard code the datetime into the code. The database is MS Access and I am using VB2008 to show the data. I would like to be able to use a DateTimePicker to set the filter date (without the time part) Also I would need to remove the time section of the datEnterDate. I cannot change the structure of the database fields. Also the datEnterDate is MM/dd/yyyy, because I'm in England I would like to use the format of dd/MM/yyyy if possible
[Code]...
I have a txtbox(for barcode).. if i input a item number in that txtbox and if that number will match in your database, the other information(shall we say, product type, item ID, etc..) will display in my other txtboxes..
View 5 RepliesIn VB if you prompt the user for a number between 1-20, then a word, how do you get a text box to show the word the same number of time as the number selected using loops?... Ex: please select a number: 4 / select a word: cat....the text box should display ::: catcatcatcat ........
I am doing this for a class and my brain has locked up. Prob. just over thinking it though. Thanks in advance for any help!
I am attempting to create a game in Visual Studio 2008 that allows a user 10 attempts to guess a random number between 1 and 50. I have a label box in which I would like to display the remaining guesses as they decrement. The code so far appears below.
My two (I am sure very basic) questions are:
1. How would I pass the random integer generated through the Generate Integer function to the AmIRight button's click function? I was trying to decrement the counter each time the "Am I Right " button is pressed.
2. I would also like to evaluate each "guess" when the "Am I right button is pressed. Is it possible to nest a Select Case statement in a For Next Loop?
vb.net Option Explicit OnOption Strict OnOption Infer Off Public Class frmMain Private Sub btnExit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close() End Sub Private Sub txtGuess_Enter(ByVal sender As Object, ByVal e As System.EventArgs) Handles
[CODE]...
i wanted to create a random number generator that iterates through a series of number between an upper and lower bound. say between 1 and 100. Basically I want the number generator to pick the numbers randomly and then display them until all 100 numbers are picked without any duplicates. so thats easy I can code that. But what I don't know is how to show those numbers in the order they are generated on a windows form. So i have basically a variable that I will let be changed 100 times (or however many times I want, I don't want their to be a size constraint just using 100 as an example) and each time the number is generated I want it displayed on screen (in a list or something not sure what. Hopefully some type of scrollable list) and each successive number also to be displayed in same format beneath it so that I can see the list in its entirety. What type of form control do i use for that? I could do messagebox.show for each iteration but then user is required to hit ok after each iteration and that would obviously be a bad idea if user selected a large number to work through. Anyways, code isn't exactly necessary just point me in the right direction, i.e.what control (if any) to use.how to format the change in data?
View 7 RepliesI am trying to make a basic ATM system, iv got all the interface done and I have made the link to my SQL database etc. the part i'm stuck on is how I can run a check to see if a bank card number matches up to the users PIN number. To simulate the user putting a card into the machine I've used a combo box, and that lists all the cards, that haven't been flagged as confiscated (there's a column in my ATMCards table that I can set to true or false) then after the user has selected a relevant card there's another text box where they can enter in their PIN number.
Now what I want to do is, if they chose the card number 1234567890123456 in the combo box and they enter in the PIN 1234 into the text box, then, after clicking the check PIN Button if the pin is correct they need to be taken to another from where they can check their balance etc., and if its wrong they got three attempts after which point i want to flag that card as confiscated.
I want to convert numbers from 0 to 15 like that
[Code]...
Problem is that when we convert 2 to binary number it gives only 10 in binary, but i want to convert 2 to 4 bit binary number 0010.