I am using this code, I got it to work fine with any C# assembly that allows it to be ran from memory. Is there anyway I could get it to work with VB.net?
private static void RunFromMemory()
{
try
{
[code]...
The error I receive is "Parameter count mismatch"
I want it to do is that you input a string, then you select an algorithm (Theres only going to be one RijnDael) then you input a key, then the Initialization Vector comes from "txtIV.text" then you select the key bytes and the block bytes from the numeric up/down, then you either encrypt or decrypt.
View 1 RepliesOk i am having some issues designing a base-class to handle generics.Caveat is i need to restrict the type put in as a Numeric type, specifically Int16, Int32, or Int64 (Short or Long).I know you can do Of T as {Structure} but i dont want to select the key bytes and the block bytes from the numeric up/down.
View 2 RepliesI keep getting a ProtocolViolationException "Bytes to be written to the stream exceed the Content-Length bytes size specified." on the following code.I've tried setting Content-Length numerous ways with no success.
Dim url = "https://domain.com"
Dim req As WebRequest = WebRequest.Create(url)
req.Method = "POST"
req.ContentType = "application/xml"
[Code]...
What exactly does this line do?
i = stream.Read(bytes, 0, bytes.Length)
Does it read the entire message string sent by the client? I have a line to write to the stream later in the code and that does not seem to be sending anything back to the client, although the code around is excuting.
i = stream.Read(bytes, 0, bytes.Length)
While (i <> 0)
Try
' Translate data bytes to a ASCII string.
[code].....
I created a text file contains 4 bytes of data
AABBCCDD
I just want to read the first 2 bytes (AABB) to execute it with my program.
Then I'll need to read the last 2 bytes (CCDD) for another computer routines
Probably missing something silly here, Her eis what my display looks like Sending image...(401303) I would prefer it displays as Sending image...(391 kb)
[Code]...
When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 23 RepliesWhen running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 2 RepliesI have recently upgraded an VB6 project to vs2008. I was almost finished when the following error occured. Unable to emit assembly: Referenced assembly AxInterop.MSFlexGridLib does not have a strong name Prior to this error appering, I tested my app several times and it was fine. Only after publishing it did the error appear. I have tried all solutions I could find, but nothing helps. I have read [URL]
View 1 RepliesI receive this error as "Assembly Load Error" whenever adding a form or other object that has to be inherited.
"Unable to load assembly. Ensure that the file is a valid .net Framwork assembly"
I am loading an Assembly using Assembly.LoadFrom() as the assemblies are located in a different path from Application Base directory.
Dim oAssembly As Assembly = _
Assembly.LoadFrom("C:\MyFolder\" + ddlXlate.SelectedItem.ToString() + ".dll")
And I consume a Type from that assembly without any problem:
oXML = CType(oAssembly.CreateInstance(sBaseType + ".XlateContainer"), _
XlateBase.XlateContainer)
However, the problem occurs when I try to use a Type from this assembly from within another method like the one below:
oComboBox.DataSource = _
[Enum].GetValues(Type.GetType(sType + "+ItemEnum," + sAssemblyName))
sAssemblyName is the one I loaded using LoadFrom() actually. After it said it cannot find the assembly, I used AssemblyResolve event which solved my problem :Subscribing AssemblyResolve event :
AddHandler AppDomain.CurrentDomain.AssemblyResolve, _
AddressOf MyResolveEventHandler
Event Handler Method:
Private Shared Function MyResolveEventHandler(ByVal sender As Object, _
ByVal args As ResolveEventArgs) As Assembly
Return Assembly.LoadFrom("C:\PSIOBJ\" + args.Name + ".dll")
End Function
And I thought maybe the error occurs because it cannot find a dependent assembly defined in assembly manifest file I loaded using LoadFrom() already but when I checked the args.Name, I saw it was trying to load same assembly and after that it worked without any problem. So basically a type in the loaded assembly cannot be found before the event adding change.
My old code was using AppDomain.CurrentDomain.Load() and Assembly.Load() methods and they were working fine without the AssemblyResolve event. I was able to reach types in dynamically loaded Assembly from every where within the same AppDomain.
LoadFrom() can find dependencies automatically within the same requested assembly path and that couldn't be problem as everything this dll needs was there. So at first it looked like a AppDomain problem to me as it looks like it seems it can reach assemblies from Load context instead of LoadFrom context and I am now using LoadFrom context.But now it seems I should pass oAssembly instance evertwhere to use any type from the loaded assembly?Doesn't it load the assembly where I can reach it everywhere (same AppDomain) using simple Type.GetType(...) method?
I'm wanting to include a system tray icon in my WPF project, and found this resource:[URL]..which looks like it will work beautifully, but it's written for C# and I'm using VB.net for this project. I downloaded his project and built the notifyicon as a DLL, then added as a reference to my project.
It throws up an error: Unable to emit assembly: Referenced assembly 'Hardcodet.Wpf.TaskbarNotification' does not have a strong name So I'm trying to figure out the best way to proceed. Do I need to strong name it, or is there a better way to do this?
I've got an exception when I deployed my application: "the located assembly's manifest does not match the assembly reference" What I remember is changing the project name from the previous source code, does it affect that much?
View 1 RepliesI have created several DLL (.NET) libraries that are used in several projects. In these DLL libraries I want to know/retrieve which assembly (EXE) calls/uses the library, so if possible I want to know info like assembly name (EXE), strong name, version number, etc.
NB: Examples may be in C# or VB. I use both languages.
I have written a .net assembly which plugs into to a third party COM application. The .net assembly is COM visible to the third party application. However this .net assembly references other regular assemblies. If I put these assemblies in the GAC the COM visibile assembly sees them without a problem. However for various reasons I do not want to put them into the GAC but I cannot get my COM visible assembly to see the other assemblies when they are in other locations. I have tried putting them in the same directory as the COM visible assembly. I have tried putting them in the same directory as the third party app's exe but neither of these work.
View 5 RepliesWhen ever I finish simple programs no matter what it is and i click to debug it it comes up"Error while trying to run project:could not load file or assembly"project name" or one of its dependencies.the module was expected to contain an assembly manifest"
View 4 Repliessorry for my English, I don't speek well... I need to compile assembly in memory, that can compile another one. There is a form with one button. Here is a code of the form
Imports System
Imports System.Threading
Imports System.CodeDom
Imports System.CodeDom.Compiler
Imports System.Collections
[Code]...
Since, it's possible for anyone to name an assembly starting with 'System', checking for 'System' is not a satisfactory solution.
Alternatively, if that's not possible, how about checking the modules in an assembly?
I am building a dll-Assemby A which references another Assembly B. Assembly B is strongly named and installed in the GAC of my development computer. An other computer will not have assembly B installed in the GAC.
Question: If i handle strongly named assembly B like a private assembly and copying it into the bin-directory by specifying local copy = true in the properties-window, will the programm run on the other computer?
One of them is giving us trouble in only 1 spot out of the 4 spots we use it at:The trouble spot is a windows form project that uses reflection to dynamically load some DLLs that run long running processes. One of these long running processes is an agent that relies on one of our vender DLLsWe're getting the missing assembly exception at the point where we first enter a function that references the library. I already checked the silly things such as if we had forgotten to move a reference from the old version to the new version, but that's not the case. I also checked the bin directory of the project and the assembly is there.
View 3 RepliesProbably a dumb question, but can you write a unit test project in one language to test against another project in a different language?I'd like to translate one of our VB assemblies into C#, but want to build unit tests to verify the results. I've tried to set a unit test project up to do this, but I can't seem to access the VB code within a unit test... I can't figure out if I'm just missing/doing something stupid, or it really isn't allowed.
View 2 RepliesWhat does [String] mean in VB.NET?
Dim assem As [Assembly] = [Assembly].GetExecutingAssembly()
Dim assem As Assembly = Assembly.GetExecutingAssembly()
I am not sure how to explain but will try through example. I need to be able to add bits to a byte see below.
I have a total of four bytes (256mb). I need to be able to add the bytes to get 256?
Example: Byte1 = 0 Byte2 = 0 byte3 = 108 byte4 = 1 I need this to equal 217 (11011001) 108 (1101100) + 1(1) = 217(11011001)
I'm writing a VB.net application (but you can answer in C# if you want, no problem) that uses a 3rd party .NET library. In particular, one method in this library takes an IO.Stream as input (among other things) and writes the results of its processing to said stream. My problem is that the method CLOSES the stream after writing to it, so I can't read back the data that it wrote in it!To be more specific: it works, of course, if the stream is a FIeStream , since it writes the data on disk, but what if I want to read the data directly to memory? I tried using a MemoryStream, but as I said, when the method returns the stream is already closed, and I can't read back anything from it.
Imports System.IO
Public Class CloseHijackedMemoryStream
Inherits MemoryStream
[code]...
i have seen many posts resolving issues with converting bytes to KB, MB and GB...how would i convert GB,MB and KB to bytes?
View 11 RepliesI am trying to compare two files and I do not know why, the filed downloaded to be compared, is always only 44.898 bytes, despite of being bigger... what am I doing wrong, I post the
[Code]...
I have a simple problem (I think). I would like to get the CRC of this array of bytes
0x0 0x7E or 0 7E or 0
Anyway the one calculator I use gives me: 78F0 or 78 F0 (Hex). Anyway, I think its CRC16 but im not sure. So if anyway can show me some code to give me a CRC calculation that matches (78 F0 or 78F0), that would be great, Im not sure if you have to include 7E or not
My app displays the bytes downloaded in a label using:
Private Sub MyDownloader_DownloadedByteCountChanged(ByVal ByteCount As Integer) Handles MyDownloader.DownloadedByteCountChanged
lblDownloaded.Text = ByteCount.ToString()
End Sub
But I thought it would be 'nicer' if it display the amount as kb/mb/gb, etc.
This is how i convert Bytes to KB etc.. vb.net
[Code]...