I'm getting 'Catch' cannot catch type 'Object' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. and 'Expression detected' Code underlined in blue: Catch obj1 As Object When (?)
Private Sub OpenJAMem()
Dim num3 As Integer
Try
[code]....
I am using VB.NET 2005 to create a Windows forms application. I have a procedure named SendMail that creates an instance of Outlook.Application, to send an email from my application. I found the code on this forum, I think.The procedure works fine, but I can't use error handling with it.I call the procedure from a button click event. I put the procedure call in a try/catch block, and the application won't build, with the following error.
Error 68 'Catch' cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. C:datadevdmtiQTSQTSv7_1_20100212wQTSQTSReportsCriteria
pt_frmReportViewer.vb 43 21 QTS
Here is the code:
Sub SendMail(ByVal sFile As String)
' Create an Outlook application.
Dim oApp As Outlook._Application
[code]....
I have a project converted from Visual Studio 2005 to Visual Studio 2010. It compiles and runs.
When I prune "unused references's from this project as listed by Visual Studio, the project fails to compile with the subject error message.
In particular one of the "unused refererences" is to "Microsoft.VisualBasic.dll". The IDE does not allow me to add back this particular reference.
What do I need to add back as a referenceto get this items?
I have a program in VB.Net that receives mails from Outlook, extracts attachments and inserts the attachments into a table through a query. I would like to put the query/queries in a Try/Catch block, but cannot do so as Outlook exceptions cannot be caught, and it gives me an error, and unless I put a very specific exception, I cannot catch it. Is there a workaround?
Edit:
Try
Catch ex As Exception
End Try
Exception is underlined and when I hover on it, it says: "Catch cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not in 'System.Exception' or a class that inherits from 'System.Exception'". This is affecting all my other code which I'd like to put into a Try/Catch block.
When testing the followng code from Mastering VB2010, I get an Unable to cast object of type 'System.String' to type 'System.IFormatProvider' exception.In the Button1_Click event code Dim strmOut As New System.IO.StringWriter(SaveFileDialog1.FileName)the 'SaveFileDialog1. FileName' is underlined with a green squiggle and displays the following tool tip:Runtime errors might occur when converting 'String' to'System. Iformat Provider'.This is apparrently the problem but what does it mean and how do I fix it to get the code to work? 'Code being tested that runs the exception:Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click.[code]
View 12 RepliesI have this scenario: in a Sub I have a Try...Catch statement.Within that Try..Catch I call another sub.In that 2nd sub is also a Try...Catch.(see below for example).Now if an exception occurs in the 2nd sub's Try...Catch, which Catch gets excecuted? The 2nd one, the 1st one or both?
Private Sub sub1()
Try
..do stuff[code].....
Private
Sub cmdExit_Click(ByVal
sender As System.Object,
ByVal e
[code]....
If I throw an exception from within a catch, does the finally (from the catch) still execute? i.e.
Try
..some code with an exception in it...
catch ex as Exception
throw new SpecialException("blah blah" & ex.Message, ex)
[code]....
It is possible to catch an exception and throw a new exception which wraps the first exception as an inner exception: [URL] Also, if I call a function and it throws a certain error, but I catch it, will the calling code's catch handler execute? If so, and it is of a higher exception type, is this not wrapping the exception? eg I can throw exception ex of type IndexOutOfRange, log it but rethrow, catch a higher up exception and do something, or I can throw a new exception and wrap an inner exception like:
View 1 RepliesI have a large project where we have 2-3 dll projects that are converted from VB6 to VB.NET. We have fixed all the issues that caused compilation errors, and most of obvious issues in running, so now we have basically a program up and running. The exe is created from scratch in VB.NET, using a lot of functionality from the converted dll's (including GUI forms). What I wonder is when I run the program in debug mode, I get a bunch of warnings in the "Immediate Window" saying:
A first chance exception of type 'System.Exception' occurred in Microsoft.VisualBasic.dll
...and some of other type (but most of them in Microsoft.VisualBasic.dll).I was wondering if this is common in projects converted from VB6, or if it is caused by bad design in our code...
I am using VS 2008, Office 2007, and Win7 Home Premium on my system.I have a simple application which should be a breeze to build. All I am attempting to do is pull data from an Access database with four small tables into a data grid on a windows project. Should be simple, set up the data connection, choose a datagrid from the table in the data source view, drag it onto the page and done, right?I can't get it to work. It will all work fine until I attempt to run or debug the project. The data will not show up. The data grid does, but I get this error: A first chance exception of type 'System.InvalidOperationException' occurred in System.Data.dll
As I said, the project seems to build fine, but it will not pull the data. After the initial build I get the message that Windows will show this page in Compatibility View. Is it something with Win7 Home Premium, or a setting somewhere?
I'm using express 2008 build the windows app. and in the app, it calls a webservice which was built by VS2003.It works fine on most PCs. however, there is one PC, it always shows this error:
System.TypeInitializationException: The type initializer for 'System.ServiceModel.ClientBase' 1' threw an exception
....
System.configuration.ConfigurationErrorException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException:
Unrecognized configuration section system.serviceModel
.....
however, the configuration file was generated by express 2008, and it seems there is no error.
I would like to create a local user on a windows 7 PC, but gets the following error when commitchanges runs. I am administrator on the PC:
A first chance exception of type 'System.UnauthorizedAccessException' occurred in System.DirectoryServices.dll
Here is my code:
CODE:
I am using Visual Basic 2010 ultimate in Visual Studio 2010.
get out from the below loop
Shared Function GetIPAddress() As String
Dim sam As System.Net.IPAddress
Dim sam1 As String
[code]....
I have a program that creates a Treeview from information procured through an ODBC query and dumped into a dataset. I have three such queries set up via radial buttons as well as a refresh button that triggers whatever radial button is active at the time it's clicked. The purpose of this program is to allow drag-and-drop of selected nodes, ending with a post to the database that officially makes that change of assignment to the new node.
[Code]...
When I run my project I get "An unhandled exception of type 'System.StackOverflowException' occurred in System.Windows.Forms.dll"
Public Class frmViewReport
Dim objForm As New frmViewReport
Private Sub frmViewReport_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
objForm.ViewReport("C:a2.rtp", , "@parameter1=test�mter2=10")
[code]....
I have the following code running, the first time I change the selected index, everything runs smoothly. However, if I try to change the selected index again, nothing happens and the subcategories combobox values do not change.
Private Sub cboMainCategory_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cboMainCategory.SelectedIndexChanged
'* make sure the combobox is fully loaded
[code]....
I keep getting an eroor this error says: An unhandled exception of type 'System.ArgumentOutOfRangeException' occurred in system.windows.forms.dll Additional information: Specified argument was out of the range of valid values.
Option Strict On
Public Class frmWeeklyReport
Inherits System.Windows.Forms.Form
[code].....
A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll It displays in my Immediate Window when i run my program, I'm using a text reader to read a number of XML files using background worker...most the time it stops so something is wrong but sometimes it works fine.
View 2 RepliesI am working on a card game, and i get this werid error:
A first chance exception of type 'System.Reflection.TargetParameterCountException' occurred in System.Windows.Forms.dll
The code that is cousing this error is:
Private Delegate Sub ShowcardDelegate(ByVal test As String, ByVal objtest As Object, ByVal value As Boolean)
Private Sub Showcard(ByVal test As String, ByVal objtest As Object, ByVal value As Boolean)
If objtest.InvokeRequired Then
[code].....
what does "A first chance exception of type 'System.InvalidOperationException' occurred in System.dll" means? it occur after the bold sentence of my program.
Dim count As Integer = 0
Dim missing As String = "Missing Ingredient:"
For Each strStore In strDownload
If Not strDownload Is Nothing Then
[code]....
Brief of my project: Taking attendance using RFID reader and RFID passive tag. Main tasks:
1) Scan a Tag and Tag ID is transmitted to GUI.
2) Tag ID is matched with Student ID in database.
3) Successfully matched Student ID is displayed on GUI and LCD.
When i had experienced this problem, student ID was only display on UI but not LCD. After that, my system hang. This happened only when the data of tag scanned is taken from text file through OpenFileDialog. Manually add of data via UI just work fine.
[Code]...
i am receiving the following error message when I debug my application, and I do now know what the problem is. This code has worked before but I don't know why.A first chance exception of type 'System.Net.WebException' occurred in System.dll
View 4 RepliesI have a project that I am working on and I just recently transfered it from an XP machine to a Windows 7 machine. Both machines are running VB Studio and the only thing that changed was I moved it from the XP machine to the WIndows 7 environment. I have not changed any of the code, I just transfered it and ran it to make certain nothing happened.
View 9 RepliesEvent type clr20r3 p3 4a5c12c0 system.net.sockets.socket Exception and Application crash on some system. while running well on others. i go thorugh many forms and search a lot on google but not able to resolve the issue.
[Code]...
I'm using a 64 Bit Windows 7 system and trying to use PrintDialog. I know it doesn't work on Windows 7 unless you add this
PrintDialog1.UseEXDialog = True
So I have added that code but then I get this error for the following
Dim result As DialogResult = PrintDialog1.ShowDialog()
And the error:
"An exception of type 'System.Runtime.InteropServices.SEHException' occurred in System.Windows.Forms.dll but was not handled in user code
Additional information: External component has thrown an exception."
catch an exception and then throw another exception? Like so:
Try
' Do operation xxx
Catch ex As Exception
' Operation xxx failed, need to execute cleanup
[code]....
The reason for doing this is that while I catch my exception on a higher level logic (to make sure I can log it properly), I need to do some actions in the event of the exception that I can only do inside my class/function.
Code: Dim dom As New DOMDocument30 dom.async = False
dom.Load(serverAddress & "/App/filelist.jsp?type=content")
For i = 0 To dom.childNodes.item(1).childNodes.length - 1 downloadfile(dom.childNodes.item(i), mcount, currentpath) Next
The above code is activated upon clicking of a button. i have the server address declared. and using the domdoc to load the jsp file to generate the xml data. and using for loop, i call the download file function which accepts the following parameters
Code:Public Sub downloadfile(ByVal domdoc As Xml.XmlNode, ByVal totalcount As Integer, ByVal currentpath As String)
The totalcount and currentpath work fine, but when i pass in the dom.childNodes.item(i) , error pops up.
--------------------error message------------------------------------------Unable to cast COM object of type 'System.__ComObject' to class type 'System.Xml.XmlNode'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.-------------------------------------------------------------------------------
[code]....
How can I catch an inner exception in .NET? I need to check 2 databases for a record. The database code throws an exception if a record is not found, so then I want to check the second database[code]...
View 5 RepliesI've written a DLL that contains a bunch of classes. One of my methods validates the contents of a file and throws any necessary exceptions based on invalid content - I'm using a standard "throw new exception." call the thing is, when my code reaches the line where the exception is thrown, my Visual Studio IDE hangs up on that line instead of the external call to my validate method.
[Code]...
So my IDE is actually pulling up the VB file that contains the DLL content and highlights the line in the ValidateFile instead of just hanging on the oFC.ValidateFile method line where the exception is thrown instead of the IDE hanging on the oFC.ValidateFile line in my calling application.
I just want user to have access to the any exceptions that are raised. Here if "C:FileThatDoesntExist.txt" file does not exist then Dll throw exception which should be catch through Application.ThreadException.. How to Catch exception from DLL ?