Change Date Format - Month Part Is Not Showing The Month Of The Exact Month

Jun 22, 2009

I changed the date of datetimepicker format to yyyy-mm-dd in custom format...but it displays 2009-00-22...the month part is not showing the month of the exact to change the format of the date?


DateToString() Gives Day/Month/Year When Converting To Date It Switches The Day And Month?

Aug 11, 2010

Currently i have a ReturnSystemDate in a module, so that whenever i need the current date and time i call this method, however my data is saving as in 1 format and displaying in another. I have my variables set up as dateTime to store the current date and time, when calling i get 11/08/2010 Time, however when casting to Date as in CDATE() i get 08/11/2010 time. How can i stop this?

View 13 Replies View Related

Using Month Calendar - User To Enter A Bill And Pick The Due Date Via Month Calendar?

May 5, 2010

I'm developing a finance software and I want the user to enter a bill and pick the due date via month calendar.  I getting it to work was the easy part, but now I only want one month calendar, for each time a user enters in a bill and picks a date.every time the user goes to pick a due date I have to call one of the several I have on screen.Here is my code that I have so far:Add due date button:


The month calender:


.TxtDueDate3.Text = MonthCalendar3.SelectionRange.Start.Date.ToShortDateString()Me.TxtDueDate3.Text
= MonthCalendar3.SelectionRange.End.Date.ToShortDateString()[code].....

View 1 Replies View Related

Sql Statement To Select Month Part Of A Date?

Jun 11, 2011

designing an inventory system and i want to generate crystal reports from sql queries.Actually want to generate monthly and yearly reports from the daily sales reports i have populated

View 4 Replies View Related

Date In Following Format Year / Month / Day

Sep 25, 2009

I am trying to get the current date in the following format - Year/Month/Day..Here is my code but the day bit isn't working.lblTodaysDate.Text = Year(Now).ToString() & "/" & Month(Now) & "/" & d(Now)

View 2 Replies View Related

VS 2008 Game To Tick Over Month By Month At A Set Interval

Dec 19, 2009

I want my game to tick over month by month at a set interval. I would use the timer control to get the interval. But how can I pause it? Say if one "month" is 5 minutes in my game and user hits pause. I would disable the timer but then when they unpause the game the timer would start from 0 again. This would make a "month" 9 minutes if a user paused the game in the 4th minute.


View 11 Replies View Related

Parsing Date Without Specific Month Format?

Apr 4, 2011

Is there a way to do so? Say sometimes I see March 2nd, 1921

Latter I see 2 March 2010.Is there a function GetDate(SomeString as string) as Date?That will sort of recoqnize all those different format and "try" parsing.

View 2 Replies View Related

VS 2010 Date Format To Display Year - Month - Day As In The Database

Dec 13, 2009

I'm using VS in Vista. I have using a DataBase in SQL2008 which its date format is year,month,day. In my app I have the date format as Format(Now, "d") which shows 13/12/2009 but when inserted it displays as 1900-01-01 in the DataBase. How can I have the date format to dispalay year,month,day as in the database.

View 10 Replies View Related

Change Only Month Name Programmatically In Datetimepicker Format Long Using 2010?

Oct 31, 2011

How To Change only Month Name programatically in datetimepicker Format Long using visual basic 2010 I am use a DateTimePicker in a form

"Monday, October 10, 2011"

Now I want to Change Only Month Name

Means ", September 10, 2011"

also i want to change only year "2011" to "2010" How I can Change it..?

View 6 Replies View Related

List Of Datetime From First Day Of The Month To Last Day Of The Month?

Jun 22, 2010

I have a problem in trying to get a list of a date including days in a table start from first day of the month to the last day of the month. This date should not include the satuday and sunday. and I should be able to pick up those date for query match.


View 3 Replies View Related

VS 2005 - Filter From Month To Month With Year In 2005 Access Database?

Jul 23, 2009

how to do select statement range from month to month using access database.. previously i use this code below when i'm using to selection those between day's or a week activities.. now, how to do range from month to month... the month format is numeric or 1,2,3,4,5,6,7,8,9,10,11,12 (jan.-dec.) representing month the ttmmonth and ttmyear fields are numeric format also in the database... how to do? look here my code for displaying week activities...


View 25 Replies View Related

Get A Given Date As 1st Of Next Month?

May 22, 2012

Here is a example for my work.

if a date ---> 20/03/2012 should be shown as 01/04/2012
16/12/2011 Should be shown as 01/01/2012
02/05/2008 Should be shown as 01/06/2012

My requirement is to get a given date as 1st of next month.

I know to do this with IF conditions. But I want to know, is there any already define function for doing my work like DATEDIFF. (DATEDIFF can get date difference)

View 2 Replies View Related

Get Last Date Of The Month?

Sep 9, 2009

how do i get the last date of the month with format 'MM/dd/yyyy hh:mm:ss', i have this:

Dim end_date As String = String.Format(DateAdd(DateInterval.Second, -3, DateAdd(DateInterval.Month, DateDiff("m", Date.MinValue, Today()) + 1, Date.MinValue)), "MM/gg/yyyy 23:59:59")
but i can't get it to be in the format i want, it stays as "dd/MM/yyyy"

View 3 Replies View Related

Compare Only Day Part And Month Part?

Jan 12, 2012

my requirement is that i have to count occurrence of a certain date and between two months
suppose i have 10-jan-2012 now i have a date range 1-jan-2012 between 1-feb-2013 my requirement is that if i find 10-jan between 1-jan-2012 between 1-feb-2013 irrespective of year i know that 10-jan will come twice between 1-jan-2012 between 1-feb-2013 i am not understanding how to do this.i meanto say that i have to compare only day and month part of the date which will solve my problem

View 1 Replies View Related

Add One Month To Current Date?

Sep 5, 2009

I have to add one month to todays date and have to get date after 1 month.

View 4 Replies View Related

Get All Sundays Date Within A Month?

Jun 28, 2011

How can I get all Sundays date within a month? For example, in June 2011, Sundays date are 1st June, 8th June, 15 June, 22 June and 29 June

View 3 Replies View Related

Get Date Of Sunday Within A Month?

Aug 1, 2010

How can I get the date of first Sunday in a month?

For example in January, the first date of Sunday is 7. What code is needed to retrieve first Sunday date in a month?

View 1 Replies View Related

Get First Sunday Date In A Month?

Jul 31, 2010

how can I get the date of first Sunday in a month? For example in January, the first date of Sunday is 7.What code is needed to retrieve first Sunday date in a month?

View 9 Replies View Related

Get The Date Of The 5th Weekday Of Each Month?

May 29, 2009

My program is to read serial port based on the timer, so every ticks, it reads the value and write it to a textbox.The timer in the form is in the interval of millisecond. Therefore I make it 1, that means every 1ms, there is an event.The event I try is as simple as writing in a text box.


the last code is meant to measure how many seconds will I get from d = 1 to 1000, it should return 1 second time difference. But instead of 1 second, it returns around 15 seconds.

View 4 Replies View Related

How To Calc Given Date / Month

Feb 28, 2011

i want to know how to add n Month to a given Date. [code]

View 2 Replies View Related

[2008] Get First Date Of Month?

Jul 1, 2008

How do I get the first day of a month? As an example, in this month, the 1st is a tuesday. How do I get this in VB.NET? I tried several possibilities, without luck.

View 7 Replies View Related

Custom DatePicker Format - Get The Day - Month And The Year

Oct 14, 2010

I am using a datetimepicker control to record leave dates. Since i am developing the application for a Ghanaian organization, i found out there is the need for me to format the datetimepicker value to suite the users so that it will look like how Ghanaian usaully write their dates. So i have been able to format it perfectly by using this code


View 1 Replies View Related

Alert User A Month Before Due Date?

Jun 25, 2010

i'm currently using 2005 with an Oracle 10g db.1. Alert the Admin by displaying on the main page a list of users who are due for re-certification if there are any. - I've managed to do this except my date calculation for the alert is wrong. When a user is certified say on 25-06-2010, they will be up for re-certification in 25-06-2011. I need my program to start alerting the Admin a MONTH before the user is due for re-certification. So basically start the alert on 25-05-2011.Currently this is my logic in VB.

Reason = Get value in Reason field (If this field is not empty, then don't raise alert for this record)
Renewal = Get the re-certification date
Sysdate = Get current system date


Alert the Admin via email - I've managed to create an email (stored procedure in Oracle) that contains the skeleton. I say skeleton because althought the mail executes fine, I've not managed yet to include the list of users due from the db. I created a Curser and dumped my results in there, but not sure what to do after that.

View 3 Replies View Related

Breaking A Date Into Day / Month / Year?

Feb 27, 2009

I hve a date selected from a calendar

I would like to break it down into its component parts i.e. Day, Month Year and assign them each to a variable

I have it in Excel


mydate = sOps.Range("G3")
'Convert the date in to string format
myday = Day(mydate)


View 3 Replies View Related

Date - Check For New Month And Execute Sub?

Aug 24, 2011

The flow of my program is the following.

On form load, the program will check current date. If it is in a new month, some function is called.

View 1 Replies View Related

Detect Month According To Date Selected?

Mar 21, 2011

I have two label in webform Label1 and Label2

Label1 displays the date as 1-Apr-2011

I want to display month as April in Label2 if date in label1 is in between 1 to 30 Apr 2011.

I want to display month as May in Label2 if date in label1 is in between 1 to 30 May 2011.

View 3 Replies View Related

Find Last Date Of Previous Month?

Mar 4, 2010

I would like to find  last date of previous month. How can I do that?

View 4 Replies View Related

Get Next Payment Date Based On Day Of Month?

Mar 23, 2010

I have an application where a payment needs to be made on the same day of each month.

So if the day of the month is the 7th. Then I need to take today's date and if it's before the 7th display the 7th of the current month. if the date is after the 7th then i need to display the 7th of the next month.

View 3 Replies View Related

How To Subtract A Month From Date Object

Feb 3, 2010

How do I subtract a month from a date object in VB.NET?

View 4 Replies View Related

Month Calendar - How To Get Date When Clicking Day

Jan 13, 2010

I have a hard time on getting the date from the month calendar. I just wanted when I click the day 14. It would appear on the textbox the month, day and year.
Private Sub mCalendar_DateChanged(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DateRangeEventArgs) Handles mCalendar.DateChanged
txtDate.text =
End Sub

View 2 Replies View Related

Put Current Date On A Month Calender?

Jun 19, 2012

I am trying to put current date on a month calender to into a column in access database.But I get InvalidCasteException. My code is as follows:

Private Sub SubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitButton.Click
Dim con As New OleDb.OleDbConnection


View 4 Replies View Related

Reformatting A Date To Show The Name Of The Month?

Aug 10, 2009

 Hello, I am reading in a date from the database in the format  "7/23/2059 12:00:00 AM" Is it possible to reformat this string as follows where the full name of the month is shown. Then the day followed by a comma and the year? "August 5, 2009" I could write my own code to do this, but I don't want to reinvent the wheel.  Here is my code I use to read the value. Basically I am getting it from a data set, and the date valu

View 5 Replies View Related

C# - Persisting Date Selections When Visible Month Changes

Feb 21, 2011

Dim List As New List(Of DateTime)

Then in my button click event:

If InputBookinglength.SelectedValue.ToString = "2" Then
Dim paramstring As New StringBuilder
If Session("SelectedDates") IsNot Nothing Then


This code works fine when selecting multiple days in one month. But when you switch to display a different month, the previous months selections are lost. how to persist the selections when the visible month changes.

View 1 Replies View Related

Check Day & Month From Date Which Is In Database Table

Jul 7, 2010

I want to check Day & month of date which is in database.There is date field is in database which is mm/dd/yyyy format If I use "select" query then whole Date is access but I want only these date's which having today's day & month.Example: if today's date is 02/02/2010 then select only those date whose day is 02 & month is February.(Dont consider Year)

View 2 Replies View Related

Date - Find First And Last Day For Previous Calendar Month In .Net?

Jan 13, 2010

I'm creating a report in MS SQL Server Reporting Services and need to set the default Start and End Date report parameters to be the first and last dates of previous calendar month and need help.The report is generated on the 2nd calendar day of the month and I need values for:

Previous Calendar Month
- first day
- last day

I've been working with DateAdd, but have not been successful at creating an Expression (in VB.NET as I understand it).

View 5 Replies View Related

Extracting Month Value From A Date Field In A Datagridview?

Mar 11, 2010

I'm not sure if this is simple or not, i'm still a student programmer. Basically I have a datagridview that has a date column. I'm wanting to compare the month value from a cell with the current month as an if statement condition. Something like this:

If Me.DataGridView1.Rows(i).Cells(7).Value = currentMonth then
End If

Cells(7) is the date cell i.e. 11/03/2010 (British date format, day, month, year) and currentMonth is, well the current month (03).

View 2 Replies View Related

VS 2005 Display All The Days With The Date Of That Month?

Apr 19, 2009 can i select a month..and display all the days with the date of that month from month calender...

View 1 Replies View Related

VS 2008 .NET Date Picker Select Month Only?

Jun 14, 2011

I have to select only month from a date picker Control. I know there is Date Format Property available for the same purpose and i am pretty happy with that.

The only problem is that when I open my date picker popup, the date picker calendar popup is in Month - Mode. Is it possible to be same on Year Mode.
I need to allow the user to select the month regardless of the day of the month.

And Also, I don't want to display the inner date of calendar control which is placed just below on calender control.

Is there any way to override DateTimePicker or what would be the best way to reproduce the DateTimePicker behavior if this is not possible ?

View 7 Replies View Related

VS 2008 Compare The Month Of A Date With Datetime?

Feb 17, 2012

I would like to compare the month of a date with, when the reaches a month beyond the given date to play a sound. I am novice to this.

View 2 Replies View Related

Get System Date And Add Some Day Or Month Or Year Then Want Next Date As Per Requirement?

Jun 22, 2010

when i get system date and add some day or month or year then i want next date as per requirement.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved