Dim file As System.IO.FileStream Dim YesNo As Integer YesNo = MsgBox("_missions_recomp.gsc Already exists, do you want to overwrite?", vbYesNo, "Confirm Overwrite?")
[Code]...
Here's the scoop. This is a simple file check, where it will write a file so long as it does not exist,however, if the file already exists, I would like to give the user the option to overwrite the file, or not.
WHY can I not check for the existence of a file in the c:windowssystem32 directory? The file IS there and this method still returns false.
View 2 RepliesI have the following code:
' The yearNode does not exist.
Dim yearNode = From y In App.Data.<year>
Where y.@id = xlParams.Year
[code].....
In TSQ IF MyVal IN (1, 2, 3, 4, 14) BEGIN ... END .Is there a way to do this in VB.NET? Is it possible to check for the existence of an integer in a set of integers inline? Such as: If MyVal in (1, 2, 3, 4, 14) Then ... End If
View 2 RepliesI'd like to use the webrequest webresponse method to test for the existence of a file.If the first file is there, then I want to test for the existance of the same filename with -1.htm appended to it. If that filename exists, then test for filname-2.htm This continues until the filename being tested comes back 404 error. At which point, the program does NOT blow up, but the do until loop stops and the code continues. I have to search for a link on each one of the pages found once I have determined how many pages there are.How do I test for a file and not have it blow up? It has to loop and it goes through at least once. this is code I wrote. Right now the page just keeps going and going. IE's little logo on the page tab keep going around in a circle like it's in an endless loop.
Dim fr As System.Net.HttpWebRequest
Dim A As Integer = 1
Dim Count As Integer = 0
[code]....
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
i'm working on a system that upgrades a basic version to a proversion but i have a payment gateway . it generates a code in an SQL DB.now i have a form in VB that has a textbox and a button how can i let VB connect to my SQL DB receive the code and then check if that code is correct and if its correct download silence the pro file. from an url.
View 7 RepliesIs there a way to check if a user(or code) has selected a file or directory?
View 4 RepliesI need to search a Byte array for the existence of another Byte array. The first array is large, about 30,000 bytes and the second varies but is usually between 300 and 500 bytes. I need to know the start position of the second array inside the first. For example if these were the arrays:
Code:
Array 1 Array 2
00
34
00
23 23
00 00
64 64
00 00
41 41
00
45
92
33
I would need to know the start position is 3.
Code:
For x = 0 To UBound(Array1)
If Array1(x) = Array2(0) And Array1(x + 1) = Array2(1) And Array1(x + 2) = Array2(2) Then
' Found it
End If
Next
And loop through finding it by brute force but array 2 will be a different size on each system so doing the above, although I could make it work, isn't practical. I could even do multiple if's like if I find the first byte then find the second, then find the third, and make it a little more bearable but still. Is there a simple way to find a array inside another array?
I am trying to have my program check for the existence of a registry key so I do not get a null reference exception error. The key may or may not exist depending on the computer. How can I check to see if it exists and then change its value if it does exist or skip over it to the next one if it does not exist? (I already know how to change the value part of it) Im just not sure how to check for the existence of it for example would be trying to set the value of a key that does not exist called test below... this obviously would throw a null exception error so how do I check for the existence of the key before executing these instructions and then if it does not exist it skips this and keeps going to the next code ?
Dim testkey As RegistryKey = Registry.LocalMachine.OpenSubKey("SystemCurrentControlSetTEST", True)
Dim keyval As Int32
' Set to ON
keyval = 1
testkey.SetValue("ON", keyval)
I also check the status of the registry entry on form load
Dim Test As RegistryKey = Registry.LocalMachine.OpenSubKey("SystemCurrentControlSetMYTEST", False)
'Get the reg value.
Dim Testflag As Integer = CInt(Test.GetValue("ON"))
[code]....
I am trying to check where an item in my array list exists in the database.The list would have already been created at an earlier stage.Now that some items may have been removed from the database, I wish to check the list against that database before removing the items, from the list, which are no longer in the database.The following code removes all items from the list rather than just each one which doesnt exist.[code]....
View 2 RepliesThe application I'm writing requires the user to select a certain directory on their hard-drive (a game directory), which is saved to the Settings. If the directory is not selected, my application can't work. So, when the program starts for the first time, the directory setting will not be present, and I want my application to ask the user to select the correct directory before the application starts (the main form is shown). I used the following code in the Form_Load event of my main form:
vb.net
If My.Settings.WolfPath = String.Empty Then
MessageBox.Show("Please select your root 'Wolfenstein - Enemy Territoryetmain' mapping installation.", "Select W:ET Path", MessageBoxButtons.OK, MessageBoxIcon.Information)
[code]....
It looks pretty complicated (probably too complicated) but I wanted to make sure that the user cannot continue until a valid directory has been selected. So when the user cancels the folder selection, my application should end. If the user selects an invalid directory (it should end in "etmain") it should display a messagebox and show the folder browser dialog again. It should keep doing this until the correct path has been chosen.The problem occurs when an invalid directory is first chosen. The messagebox does show, but it shows behind all other applications! It took me a minute to figure that out, because I could not find my application anywhere, but Visual Studio still said it was running... After finally finding the messagebox behind everything else, it seems that now everything comes up behind everything else! When I click OK on the messagebox, the new folder browser dialog also shows up in the background, etc, etc. If I then choose a valid directory, the application loads the main form in the background...
I thought at first the problem would be the fact that I am running this code in the Form_Load event. A better place perhaps would be a Sub Main() from which the main form would be loaded explicitly (Application.Run(mainForm)). However, I can only select Forms as the Startup Form. If I disable the "Enable application framework" checkbox I can select the Sub Main() as Startup Object, but all the visual styles are lost...?
I'm trying to verify if data exists in two different tables in a single transaction. The reason for the single transaction is the database gets hit about 1-3 million times a day so adding anymore than 1 extra transaction would increase that number up to 9 million, and my poor little server needs a break :)
So I need to check if an ID exists in table X and table Y and return the results to my VB.net script so I can handle the outcome Ideally something like this would work
if exists (select id from X where id = @id)
print 'True,' else print 'False,'
if exists (select id from Y where id = @id)
print 'True' else print 'False'
Which gives me "True, True" if exists in both or "True, False" etc etc... But that only displays in SQL print and not actually returning it as an object/string or array values that I can use.
I'm open to any sort of solution of this nature that can give me two results from a single transaction and how to handle that response in vb.
I am using PostgreSQL database with VB.net through ODBC what goes OK. Sample code:
[Code]...
Is there any code that will make possible check if the user typed a word i want in order to show him something ? something like , if the user types time , or tim or timing or the word time and transformated to show him up the time ..
View 4 Repliesis there is any direct method or function in array class that can check if any given byte array is a subarray of other array?or should i loop through the each byte of main array to see if smaller array exists in that or not?
View 2 RepliesOur program will start with the help of a FileSystemWatcher object. How can we check or the file is total copied, for example the file is 100 Mbyte it take a time it's ready for use. Idea:
Do While True
Try
N = testForUse(BigFile)
If N = 1 Then Exit Do
[CODE]...
I am working on a check digit program and I am having some trouble finding the best path to take. The program requires 5 digits (numbers). I am calling them
num1
num2
num3
num4
num5
My ultimate goal is to use this equation:
num5 = num1 + (num2 *2) + num3 + (num4*2) - but I use the second digit of the resulting number.
Example: number 12346 - would be "correct!"
12345 - would be "wrong!"
1 + (2*2=4) + 3 + (4*2=8) = 16 so the correct would be 12346 When the user puts in the numbers on the UI I will be returning a comment in a text box on the UI.Which direction should I start?
I am Doing Spell Check for multiple Text box in VB6.0,the Spell Check is working but the Screen is Flickering?
View 1 RepliesI wish to get a quick feeling for how much copy and paste coding we have, there are many tools for C# / Java to check for this type of thing. Are there any such tools that work well with VB.NET? (I have seen what looks like lots of repeated code,
[Code]...
We are trying to modify a program to control a usb relay device. Essentially what the program originally does is give you a series of check boxes that you check to make the relay fire. We tried to modify the code so that the box is checked after 5 seconds using a counter and an if statement. It works, but only partially, what happens is the check box shows a check, but the even that is normally triggered does not happen.
[Code]...
I'm making an email sending program and still I don't know how to check if the mail was really sent or not, because sometimes the program will have no error messages but the mail was not actually sent. Is there any other way on how to deal with this except for making use of try catch?Here is my code:
Try
mail.From = New MailAddress(TextBox2.Text)
mail.To.Add(New MailAddress(TextBox1.Text))
[code].....
I'm collecting in an array the splitted text of a textbox in order to search in a bimensional array for matching in the name, but I got the error "NullReferenceException" at the red line. Now, I looked the code multiple times, but I didn't find the error. Dim info(0 To 0, 0 To 5) 'this is array is already filled by a sub
[Code]...
I have (in Excel) code similar to this:And then from there it will call the corresponding module and pass varStar to each module and run the code. The issue I have is that sometimes (like right now) it is a new year, or a new month and varStar may not exist in the specific workbook. How can I code it to, if varStar doesn't exist just skip it and keep going. I tried On Error Resume Next, and On Error GoTo 0. But that wasn't 100% efficient.
View 2 RepliesThe problem seen to appear again in printing job...I have a printer(Epson TM-T88IV Receipt)Before printing, i would like to check if printer is available for printing or not (connect or not). if not, i will show the print preview form. otherwise it will print automatically
View 2 RepliesIm trying to get my code to check that my textbox has 16 digits in it so that it can then validate the number entered. Here is the doe i have so far: [code]
View 3 Repliesi cant really find how to code check and uncheck or if listview 1. selected item = checked then.
View 2 RepliesI'm trying to make it so that if a user checks the listview item checkbox, it does something, but not when the code checks it. This seems really basic.
View 2 RepliesI don't want check if an item with a value exists in the arraylist,I want to know the best code for performance to get how many occurrences of the same item with the same value exists in an arraylist.
View 2 Replieshow can I check(with code) if an mdichild form is already opened or not. I have some mdichildforms that may open together. If an mdichild form is opened I want to dislpay the already opened form and not a new one.
View 4 Replies