Checking Treeview Nodes - If Parent Is Checked Check All Child Nodes
Aug 31, 2011
I'm all new to this treeview business. I have a fixed treeview, very simple and basic. Only two levels, parent and child nodes. I just need two things out of this treeview.
1) If parent is checked, check all child nodes.
2) If just one child node is unchecked, uncheck parent node.
That's it! I've been looking for this for 30 mins and I cant find it. Maybe because my vb.net is old, it doesnt seem to be the same as others =/ I'm using vb.net 2003.
I was wondering how I would go about placing a check in the checkboxes for each child node of a parent node in a TreeView control, if I was to check the parent node.
For example: Parent 1Child 1 Child 2 Child 3
If I was to check "Parent 1" how would I be able to make that event place a checkbox beside all of the child nodes of "Parent 1"? (Child1, 2, and 3.)
I am not sure I am getting the concept of referencing nodes in a treeview. When I hard-code nodes like:
tnParentNode = New TreeNode("ABC") tvReports.Nodes.Add(tnParentNode) tnParentNode = New TreeNode("Some Other Company")
[code]....
I get two parent nodes and one child off Some Other Company. However, when I pull information from a couple of tables to set up the parent and then the child nodes, I only get the parent nodes.So I pull the main parent nodes from one table and the child nodes from another table.This code pulls the parent nodes without any problem:
strSQLText = "SELECT lID, sCatName FROM Category ORDER BY iSortOrder DESC" reader = GetReader(strSQLText) While reader.Read
[code]....
But this does not add the child nodes. I am assuming it is because of the first line in the above reader.read while loop. I must not be referencing the proper parent node but I am not sure how to do it.
I have a treeview with nodes being represented as checkbox.
All works fine i.e when a parent nod is checked, its child and sub child should be checked as well but it won't check only the first subchilds and i am not able to find the solution, i have debugged it many time, but still not able to figure the solution.
I tried finding the solution on the web, but didn't got the proper solution. Below is the code which i am using in my form.
Private Sub trvModule_AfterCheck(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewEventArgs) Handles trvModule.AfterCheck, trvReports.AfterCheck, trvMasterAccess.AfterCheck
I'm running out of walls to bang my head against. Okay new windows form with a textbox, button and TreeView Populate the TreeView.nodes with the default nodes via properties
[Code]...
I want to click button1 and have the name of the childnode? Node3? placed in the textbox. Not via selection, I can do that. But via index or item number. The code I have is as follows
I am displaying all checked nodes from treeview1 like........
Private Function GetCheck(ByVal node As TreeNodeCollection) As ArrayList Dim lN As New ArrayList For Each n As TreeNode In node If n.Checked Then lN.Add(n) Else lN.AddRange(GetCheck(n.Nodes)) End If Next Return lN End Function
It works properly. But If I prints checked nodes. Then again if I un-check any checked node from already checked nodes and now. If I print then I don't get the exact checked nodes. It still shows me previous output. What should I have to do for getting the exact checked nodes? Selected Node
How To Display All Checked Items Of A Treeview BUT----- IF-- A Parent Node Is Checked Then Display Its Name But Dont Display Childs Nodes Of The Same Node Only. I am Using VS 2003 and Framework 1.1-2.0
I trying to get what I think should be a simple thing. I have a checked treeview. I need to get the text of each checked node into a string. For the life of me I can't get it. I am trying to loop thru all the nodes and see if they are checked but I keep getting a "object reference not set to an instance of an object" but I don't know why.
Dim value As String Dim node As TreeNode Dim i As Long
I have the following code which checks for the value of the 'cc_supplier_status' column for each of the rows in my table. If the state is 0, I need a child node to be added to a node named 'Inactive Suppliers' in my tree view (tvw_Supplier) with it's text being the value of the 'cc_ supplier_ name' value for the same row.If the state is 1, a child node is to be added to a node named 'Active Suppliers'.If the state is 2, a child node is to be added to a node named 'Pending Suppliers'.The code I have now just filters out the status value for each row, and performs a select case on it. I need to know how I'd add a new child node to the parent nodes mentioned above.[code]
I have the following code for a treeview, It only shows a +sign against some folders, mostly system folders but not others, a mod to this code to show all childs, irrespective of how many levels the child folders exist?
Dim basenode As System.Windows.Forms.TreeNode If IO.Directory.Exists(path) Then If path.Length <= 3 Then
Most of my treelist code is working ok, however I would like to produce two arrays of string, one which contains all the parent nodes in a Treeview, and the other with all the child nodes. I'm obviously doing something stupid as I have "Object reference not set to an instance of an object." I'm not declaring something.
This is my attempt: Private Sub listbuilder(ByVal nodelist As TreeView) Dim parentlist() As String Dim childlist() As String Dim j, n As Integer [Code] .....
I'm new to this Visual Basic stuff. I have TreeView under the name of TreeView1 and it has two Parent nodes, one is Library and the other is Store. Under Library and Store I have childnodes and thats were I'm stuck. For example under Store there is Downloads and Apptrackr.
What I want is when a user clicks on Apptrackr it runs this piece of code WebBrowser1.Visible = true DownloadsBrowser.Visible = false And when the user clicks on Downloads it then does the opposite WebBrowser1.Visible = false DownloadsBrowser.Visible = true
I have a treeview, a button and a textbox. When you click button1 a folderbrowserdialog opens and after choosing the folder the path to the folder and anything in it is show in the textbox and with this
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim sDirs() As String
[Code]....
adapted from Major treeview/list view head ache I managed to make the treeview display the folder and the sub folders... but it isn't very hierarchial. Check attached pictures. Image1 shows how it is and image2 shows how I want it to be. Can anyone tell me how to get it to look like image 2?...Image2 was made in Windows Explorer. Image1 is a screenshot of the runing program that I am trying to make. I have been googling around but no luck so far. Practically I think what I shoul be asking is how to create child nodes of subfolders. The program is going to copy whatever the user checks in the treeview into another folder chosen by the user. I am using Visual Basic 2008 Express.
I want to create a treeview using this XML file. I have written following code
' Load a TreeView control from an XML file. Private Sub LoadTreeViewFromXmlFile(ByVal file_name As String, ByVal trv As TreeView) ' Load the XML document.
[code]....
where as I want table as parent element like this
->table ->Associations ->Fortune 100
so that If i click table node, all tree collapses or expands.
I'm trying to get my program to append a child to one of my parent nodes in an XML file. I have looked online for quite some time trying to determine the best way possible, and have come up with the following
way to return a collection of treenodes which are children of a selected node? I can't find on MSDN a object of treenodes that is a collection of childnodes.
I have two treeviews, and I am writing code that will copy treenodes from one treeview to another treeview if it is selected. If a parent node is selected, I would also like to copy over all the children. If it is just a childnode, then I would like to copy just that.
Here is what I have so far.
Dim treeobj As TreeNode treeobj = TreeView2.Nodes.Add(TreeView1.SelectedNode.Text) If TreeView1.SelectedNode.Parent.Index.ToString Is System.DBNull.Value Then
The child nodes are there when first populated but when drives are changed or re loaded a second time, that is when they are missing, so how do I reset the nodes to show child nodes every time
I have a treeview. The root nodes have images set at 30x30 - is there a way to add child nodes with NO image or a smaller image? I can do a blank image, but each child is spaced far apart! I would like the child nodes to be like there is no image... tight and close to each other.
i have a treeview which is databoud to a access dataabse, the database has 1 table, and the treeview shows everyname from column 2.
What im trying to achive is for the treeview to also display the names from column 5 and 6 as child nodes of the name from column 2. Been tinkering all morning to no luck, googles not finding much int he way of working examples, just lots of garbage.
OK, so I have the code to add a Child Node to a selected node in ta TreeView. The thing is, even if I select a child node to "add" to, it adds the new node to the parent of the selected child node.
I know why it does that: TreeView1.Nodes(TreeView1.SelectedNode.Index).Nodes.Add() adds to the first node. So how do I progamatically add to the child node I have selected, not it's parent node. I can't figure out the logic on how to accomplish this.
NOTE: There can be an infinite amount of child nodes.
UPDATE: I just found out that if I have a child node selected, TreeView1.SelectedNode.Index returns -1 since there is nothing selected in that first level. I'd have to use TreeView1.Nodes(0).SelectedNode.Index to get the proper index for the ChildNode. *sigh*
