so i have done some research and found, that if I want to execute a command on another computer (with a program I make) I need to do something with TCP like TCP listener and a client.
So I now want to have program x and program y. In x I write bla bla bla in textbox1 and then press my button, now the person on program Y see the text i was written displayed in his richbox1. But how?? Does it need a lot of work?
I have a desktop computer with a cable connection on the back that allows me to watch TV on the computer using Windows Media Center. I had the idea of writing a program that would access this feed and send it to another computer (laptop) via my network. That way I would be able to watch TV from anywhere that my network spans. I have no idea if this is possible or how I would even do it,
So I have three questions.
1: Is it possible?
2: How would I go about access the feed?
3: How would I send it over the network?
My original thought was doing it in Flash, but I'm not very good at Flash so I wanted to do it in VB.Net.
I looking for a solution for how to check if a connection to a remote computer exist or not using vb.net.
I 'm writing a program which will request data from a remote sql server. I need to check if the connection to the remote server exist, before open the connection or run the the sql command.
I have a problem when trying to detect the computers network connection status.
Here is the code I have used:
Dim IsAvalible As String = My.Computer.Network.IsAvailable
If IsAvalible = True Then Label1.Text = "Connected" Else <code>
<code>If IsAvalible = False Then</code> I <code>
Label1.Text = "Disconnected"</code></code>
End If [/ICODE] End If[/ICODE]
But for some even when the network is disconnected or the computers wifi is turned on I still get the result of "Connected". I think there something wrong with the code.
and advise how I can change this connection string at run time. This is going to be on Client's computer and my application will need to change the name of computer after user enters it.
View 1 RepliesOk I have a question about connection string in vb.net. Im using the string [Code] but here I am specifying the serverName by its name, now if I deploy my application and send it to another person to use it I see that server name is changing according to the name of the computer. Is there any way where by I can make my application to detect itself the Name of the server present in that computer and use it in connection string?
View 2 RepliesI have a simple chat program i have made, it works but with a few errors.
1st if it can't find the physical pc it is trying to connect to it crashes.
2nd if it finds the physical server but not the program (server) running it says "the computer actively refused the connection on IP/Port" and then crashes.
Code for connect button:
IP = txtboxip.Text
Port = txtboxport.Text
[CODE].....................
We are going to change the connection string in Settings.vb so we don't need to worry about what it is when our app runs on a different computer other than the development computer.
[Code]...
i have a task to create a TCP Server (a program that is listening on its network card interfaces for incoming data stream).I have search on the internet and i found that i can use two methods : Socket or TCPListener class.I have created an example for Socket class, but i wondering how could i test it? I need to check that if another computer in the network send some string data to the listener computer , then this message should be displayed.Here is the example from microsoft that i am using for TCP Server using Socket:
Public Shared Sub Main()
' Data buffer for incoming data.
Dim data = nothingc[code]....
But it does not work because of the PORT setting.If in the TCP Server i have "Dim localEndPoint As New IPEndPoint(ipAddress, 0)" the client crashes, but if i change the port from any (0) to 11000 for example,the client works fine.Do you know why?
Later edit2:Maybe i should have started with this question:Which method is recommended for my scope?asynchronous or synchronous method ?
I am developing a computer application designed to monitor the network and CPU statistics on a computer remotely. The monitored computer would have my program installed and the monitoring computer would display, in a form, the information being sent from the remote client.The application does not send any information regarding packets, user names, passwords, etc. It is solely meant for monitoring CPU performance and Network resources remotely.
What would be the best method to send this information over to my host machine?I am programing in Visual Studio 2008 on windows XP. The client machine is also XP. I know this sounds a little shady, but it is required for my little business (http://www.iquorum.net) to monitor what and when something happens on our machines when I and my employees are away.
I am trying to dial a computer from another computer using Modem for sending files and messge.Follwoing is the code done in dialing computer
Text1.Text = "Test string from App1 "
Number$ = InputBox$("Enter phone number:", "Number$")
If Number$ = "" Then Exit Sub
Temp$ = Status
[code].....
But after the dial tone, i am getting the exception "CTL_E_GETNOTSUPPORTED " at the line MSComm1.Output = Text1.Text?
i have encountered a problem, i want to access the data coming to the computer from the in-built bluetooth module of a computer on windows platform, this data has been sent by a remote bluetooth module say a by an autonomous device (just like a bluetooth mouse connecting to the computer). The to be sent is in the form of numbers and i need these to manipulate on the computer.
View 6 RepliesI need to copy a file from a local computer to a remote computer on the network, if i try to use File.Copy without logon i get the following error:"Logon failure: unknown user name or bad password."How do I provide user name and password for file copy?
View 2 Replieshow can i look up for a specific computer given ip or computer name ...retrieve the user logged on..
View 2 RepliesProblem:When my computer restarts my mapped drive appears under My Computer. When I try to use it from code I get errors. If I open the mapped drive by double clicking it, and then try the code, it works. What I discovered is that when my computer starts the status, using net use, is
[code]...
I have to create an online application which i can apply it on every employee's computer in my company and i have create the application on visual basic 2008 and SQL 2005 using windows application and database. The problem is i do not understand how am i going to run the application on every employee's conputer. Because i have create the application on my computer, must i install SQL on every employee's computer? or any other software i have to used.
View 8 RepliesThis line of code freezes on my Win7 dev computer but not my XP dev computer.I am using Visual Studio 2003.
strOutputFile = "c: est.mp3"
How do you share files from one computer to another that are connected in one wireless internet connection? I mean, it's possible using shared folders this means it could be possible in vb.net too..
View 1 RepliesI have exe file that lunch a program takes 5 inputs. this exe locates in computer B and I need to execute it from computer A using VB.net customized application that pass the inputs through it.
View 3 RepliesI tried to get os version of remote computer using ip address with WMI ,It shows "RPC server unavailable" error.If anybody have solution for getting remote system information without WMI in vbnet,
View 1 Replieshow to transfer files from 1. computer to the computer with the program made in visual studio 2008 (visual basic)
View 3 Replieshow to make automatic backup from one computer to another computer ? I'm using vb.net. We are on the local network.
View 14 RepliesHow do I assign a My.Settings.Item connection string to cmd.Connection connection string value?
Dim cmd As New SqlCommand()
cmd.Connection = My.Settings.Item("csStaffHoursWorked")
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "spSaveDeltekImport"
The way we get my.computer.name, can we also get the name of all computers on a network?
View 1 RepliesI want to find the computer which are connected with my computer via lan connection using vb.net code. actually a have a mini project in network connection setting.
View 1 RepliesThis would be easier if I were able to have the external computer get its own name and just pass it to a web service as a variable, but I'm not able to do that right now. There are a variable number of computers from several different entities that regurarly access a web service on one of our servers. Changing only some VB.Net code on the server and nothing at all on any of those external computers, how would I be able to get their names programmatically in VB.Net?
View 2 Repliesi have a list of Hostnames from computers in my network and now i want to know how i can get the computer-description from these computers.
View 3 RepliesWe have an VB.NET VS 2005 application that goes out and connects to remote computers on the network to gather information about the running services, processes, etc.
However, not all of the computers and servers are Windows boxes, and this is causing us some grief.
Is there a way in VB .NET to determine if a computer is running a Windows OS before trying to make a connection to it?
Is it possible to reload a form of the running application from one computer when I executed a function from my other computer with the same application? co'z I want to see the changes of data on my datagrid view?
View 2 RepliesI'm trying to develop a windows application where i can get connected to remote server and look for process state going in remote server.We have many remote servers where automatic installation of software going on. We have an xml file(installstatus.xml) where it tells us at what stage the installation is (Example : Inprogress , Completed, Failed.)
So our aim is to develop a windows application where i can get connected to that servers and look for their installation status(may be we can use installstatus.xml to look for installation status). Every time i connect to a server, the server information should get stored in XML file(i want to create a xml file where all the servers list i connect to should get stored)
The UI at left side should will have list of servers i can connect to. When i get connected to server, at right side of UI, i want to display the status of installation (In progress, failed , completed).