I am getting the error: Conversion from string "11/07/2010 13:00:00" to type 'Date' is not valid. In my ASP.NET code when run on the web server. The date is valid and it can't be a US format issue because either way it would be valid. I have tested it and it seems to error when the time is > 12:00 (ie. a 24hour like 13:00 or 21:00).
When I close my form without saving I want to check if the data on my form has changed since the last time I saved the data.This peace of code, which I included at the bottom always worked fine.Except when I compade a DateTimePicker with a null value in the db.Than I get the error "Conversion from type 'DBNull' to type 'Date' is not valid."Probably on this peace of
Me.dtpVrijeDatum01.Value.Date <> CDate(reader("VrijDatumVeld01")).Date Or
Me.dtpVrijeDatum02.Value.Date <> CDate(reader("VrijDatumVeld02")).Date Or
Me.dtpVrijeDatum03.Value.Date <> CDate(reader("VrijDatumVeld03")).Date Or
Me.dtpVrijeDatum04.Value.Date <> CDate(reader("VrijDatumVeld04")).Date Or
Me.dtpVrijeDatum05.Value.Date <> CDate(reader("VrijDatumVeld05")).Date Or
The total code to check the changes is:
Private Sub CheckForChanges()
LeesCheckboxWaarde(Me.chkFacAdrIsBezAdr, intCheckFacAdresIsBez)
LeesCheckboxWaarde(Me.chkPosAdrIsBezAdr, intCheckPosAdresIsBez)
[code]....
I'm storing dates intoa table like:vb.net "INSERT INTO myTable (datum) VALUES ('" & Convert.ToDateTime(dgvrow.Cells(0).Value).ToString("yyyy/MM/dd hh:mm:ss") & "'" & ")", conn) This works perfectly. After storing the dates I need to load /show them into a MonthCalendar. This is where the error occurs.
[Code]...
I want to to make date format dd/mm/yyyy with access 2003
Dim strdate As string="22/09/2010"
Dim dd1 As New Date
dd1= strdate
I get : Conversion from string "22/09/2010" to type 'Date' is not valid.
I get the error: Conversion from type 'FileInfo' to type 'String' is not valid. This happens in between try and end try
Private Sub CopyNotes()
Dim NotesBase As String
Dim NotesTgt As String
[Code].....
I have the following code to use Words spellcheck feature on a RTB. Once you pick the correct word in the spellcheck box and press change I get the error on th efollwoing line
strResult = Left(objDoc.Content, Len(objDoc.Content) - 1)
I tried to use CType() but still complains.
If (Len(t.Text) = 0) Then
'nahhhhhhhhhhh
Else
[Code]....
when i am trying this Date.Compare(Format(DateTimePicker1.Value.Date, "dd/MM/yyyy"), Convert.ToDateTime(dr(1))) < 0 it gives an error message as "Conversion from string "23/06/2011" to type 'Date' is not valid."where dr(1) is database field in text format as 29/3/2011 (dd/mm/yyyy) .
View 3 RepliesI am currently in programming class and I have tried time and time again to complete a form called "theater revenue" that was assigned to me. Even though I have typed in a lot of code, it keeps telling me "Conversion from string "" to type 'Double' is not valid."
These are the directions: "A movie theater only keeps a percentage of the revenue earned from tiecket sales. The remainder goes to the movie company. Create an application that calculates and displays the following figures for one nights box office business at a theater. Assume the theater keeps 20% of its box office receipts. Use a named constant in your code to represent percentage."
Here is my code....
vb.net
Private Sub btnCalculate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalculate.Click
' Declare variables for the calculations.
Dim dblATS1 As Double
' Gross Adult Ticket Sales as Double
[Code] ......
[code]I'm trying to leave the textboxes A, B and C EMPTY so an error message box will appear saying "You did not put any value in textboxes A" or "B" "C".. but my program works if you put a value in the three boxes.[code]
View 6 RepliesI have a form, which holds several comboboxes, textboxes, checkboxes.I use an msaccess database to store the values into.When I enter text in a textbox and then click the save button I get the following error:conversion from string "" to type 'double' is not valid.But I really don't understand, the field of the database where the textbox text is being stored in is a text type.I searched google for it and the problem seems to be that the type of data from the textbox isn't the same as entered into the field of the database.But the strange thing is, is that as far as I can see, it is.[code]
View 5 RepliesI have an InputBox where I want someone to input a number. The number would be an integer. The line looks like this amount1 = InputBox("how many?", "how many?")If they click cancel, it errors out because it can't convert blank ("") to an int. How can I do this with InputBox and not get that error?
View 1 RepliesI am developing a site in ASP.Net and VB.Net that will enable users to sort data in a GridView in Ascending or Descending order.The records are coming from an SQL Server Express database.
I go to click on a column heading to sort the data and I get the following error:
'Conversion from string "DESC" to type 'Double' is not valid.'
Below is the code I am using for the sorting:
[Code]...
<!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:1; mso-generic-font-family:roman; mso-font-format:other; mso-font-pitch:variable; mso-font-signature:0 0 0 0 0 0;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-1610611985 1073750139 0 0 159 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-
[code]...
Error :Conversion from string "LastRunEnd" to type 'Date' is not valid.
My web app is running perfectly in asp vb.net editor. But when i run my web app through IIS7 then i get this error. What am i missing in configuring IIS7?
View 3 RepliesWhen I open by form and close it when txtprojend.text is empty I receive unhandled exceptional error in the code below; How can ignore and never receive the exceptional unhandled problem. Conversion from string "" to type 'Date' is not valid.
Dim datProjEnd As Date = CDate(txtprojend.Text)
The function below gives the error:Conversion from string "AMI" to type 'Date' is not valid.InvalidCastException was unhandled.
Public Shared Function LoadPatHist() As List(Of PatHist)
Dim PatHist As New List(Of PatHist)
Using conn As New System.Data.SqlClient.SqlConnection()
conn.ConnectionString = ConnectionString
[code]....
I received this error when trying to launch a button. After entering a date of 01/02/2009 it returned this error: "Conversion from string "" to type 'Date' is not valid." My code is as follows:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Me.txtVerifiedInfo.Text = Request.Item("txtFirstName") & _
Chr(13) & Chr(10) & Request.Item("txtLastName") & _
[code]....
I did a clean install and tried to get the project running again. The code ... AlteredDate = SelectedDay & "/" & SelectedMonth & "/" & SelectedYear would always work defaulting to DD/MM/YYYY before the clean install. The program now runs an error "Conversion from string "13/8/2009" to type Date is not valid.. How do I change the default back to DD MM YYYY or format it to that?
View 3 RepliesThe function below gives the error:
Conversion from string "AMI" to type 'Date' is not valid.
InvalidCastException was unhandled.
[Code]....
I'm getting the error "Conversion from type 'DBNull' to type 'Date' is not valid."here's the line generating the error.
dtReady.Value = dSet.Tables("Db").Rows(Inc).Item("Fixed_Date")
I'm using a date/time picker control and sending the db value to it. I know that the value is null, but I don't understand why the Picker can't be blank. Is there a way to let it be blank? Or should I set up a way to check for nulls and assign today's date or something just in case?
a user will enter a number, n, which ranges from 1 to 30. they will also enter a "P" or an "S" (sum or product). depending on which was selected, it will calculate the sum or product of the numbers from 1 to n.i'm having a conversion error on line 5 stating "Conversion from string "S" to type 'Double' is not valid." [code]
View 2 RepliesI have a query in my DAL that results 1 item, a date. It's either a date or null. But I get an error when the value is null. Conversion from type 'DBNull' to type 'Date' is not valid. Query
[Code]...
I am getting this exception from the following VB.NET code for only certain months: System. InvalidCastException: Conversion from type 'DBNull' to type 'Date' is not valid.It happens on the line:if CDate(dRow("CompleteDate")).ToString("d") = arrWeekYear(i, 1).ToString("d") Then.If I understand this correctly, then the problem is I am trying to compare some NULL values for CompleteDate to a non-NULL value.However for some of the more recent records, it does not. But I am able to get output from the T-SQL query with same date range and there are no errors; it runs quickly also. And I examined this T-SQL query for both "Date_ Completed" and "Review_Date" NULL values, but either way,"CompleteDate" was always = NON-Null value.So I do not understand how this is happening.[code]When I add this line above the error-causing line above, my report times out for these months.If Not dRow("CompleteDate") Is System.DBNull.Value Then
View 2 RepliesI'm trying to add a new record to my database but i keep getting the message - "conversion from type DBnull to type string is not valid". I think its something to do with the Employee ID when VB attempts to save it to the database my code is below
Imports System.Data.OleDb
Public Class Add
Private Sub DisplayRow()
[Code]....
I now have SQL Parameters set up and I'm using them to save/delete/add my data. This all works well, except when it's trying to save a combobox to the datatable it appears with the error above.Majority of my comboboxes have datasources, and the valuemembers of these are the actual list items, not the ID's of the list items.I'm not sure why this error could be happening, I'm fairly sure I've connected everything to the binding source correctly; I've checked it a few times.Does anybody know what the cause of this could be? I've looked around a bit and I haven't found much
View 7 RepliesWe are running .NET 2.0 ASMX web services on Windows 2003 server on IIS 6.0. We have migrated a legacy VB 6.0 application to .NET 2.0 application using VB.NET. CDATE function is used at many places and we did not replace that with .NET equivalent date functions. After migration, code was working fine for many years.Recently, we have started encountering issues on our production servers where the below code fails:
CDATE("11 Jul 2011 21:10:27")
Error: Conversion from string "11 Jul 2011 21:10:27" to type 'Date' is not valid."If we perform an iisreset, the same code starts working fine. Could this be due to some recent patch for Windows server/ .NET patch?
I have these errors when creating my website?
Error 1Server Error in '/ Application. -------------------------------------------------------------------------------- Conversion from type 'DBNull' to type 'String' is not valid. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Conversion from type 'DBNull' to type 'String' is not valid. Source Error: Line 64:
Line 65:
how can I solve this error without having to fill all of my fields. Some of the fields in my database are Nulls and some have records.
Error: Conversion from type 'DBNull' to type 'String' is not valid.
I am getting the error "Conversion from type 'DataGridViewTextBoxCell' to type 'String' is not valid." When trying to display a cell from DGV in a listbox.I have my variable for the cell reference as follows:
Dim a As Object
a = DataGridView1(4,1)
To insert it in the listbox as follows:
lstLetter.Items.Add(String.Format(a))
I tried:
lstLetter.Items.Add(a)
This will not actually display the entry inside the referenced cell, it shows this in my listbox instead:
DataGridView TextBoxCell { ColumnIndex=4, RowIndex=1 }
how I need to convert this to display.
I was tried to get quantity from db make use of the selection in list box. I got answered with listbox1. If i selected the item in listbox1 the quantity would appear in textbox1. But in this same code will not work for listbox2 with textbox4.. Here i given the code...
$Con.open()
$Dim cd as new oledb.oledbcommand("Select Quantity from tlist where tool_name"& "'"listbox2.selecteditem & "'" & "", con)
[Code]....
Here i got the error as "Conversion from type DBNull to type string is not valid"