Conversion From String "Username" To Type 'Boolean' Is Not Valid?
Sep 6, 2009
Private Sub ConvertLabel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ConvertLabel.Click
If UserBox.Text = String.Empty Or "Username" Then
[Code]....
Runtime I get this error:
Conversion from string "Username" to type 'Boolean' is not valid.
I want to connect to the proxy server using with the webbrowser while reads the strings of the proxy username, password, ip and the ports in each textbox.ere it is the
Imports System.Net Imports System.IO Public Class Form1
i have a problem with my code: [code] At the bold part, when i goto debug my program i get the error "Conversion from string "TrueFalse" to type 'Boolean' is not valid."
i want to save the settings of the checboxes so next startup it will take the settings how they were put in. But it gives an error when i am opening the "Settings tab" : Conversion from string "Settings" to type 'Boolean' is not valid.
Ill post my code here:
Private Sub Settings1234hide_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load CheckBox1.Checked = My.Settings.MyBool
i'm getting error like this An error occurred creating the form. See Exception.InnerException for details. The error is: Conversion from string "" to type 'Boolean' is not valid.
my code was
If UsernameTextBox.Text = 1 And PasswordTextBox.Text = 1 Then PIF.Show() End If mithila.s
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.InvalidCastException: Conversion from string "" to type 'Boolean' is not valid. ---> System.FormatException: Input string was not in a correct format. at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat)
[Code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
I wrote this block of code below 'Once all the score zones have been double clicked, the game is over
If Me.LabelOnes.Text <> "" And LabelTwos.Text <> "" And _ LabelThrees.Text <> "" And LabelFours.Text <> "" And _ LabelFives.Text <> "" And LabelSixes.Text <> "" And _
[code]....
I get this runtime error message after only one of the score zones has been filled
Conversion from string "---" to type 'Boolean' is not valid.
When I run the following code If DropDownListKey.SelectedValue = "Card" Or "Key" Then I get an error message as follows: Conversion from string "Key" to type 'Boolean' is not valid. I can't figure out why I would get this error if I was just checking the value of the dropdownlist control.
Am using vb.net 2008 and sql2008 and I want to loop thru frmMovement.DataGridView1 and the checked rows shd get populated into frmMovementReceivedFiles.DataGridView2. But I used Cbool, Boolean.TryParse to convert the the checked value but I still get but still the error: "Conversion from string "" to type 'Boolean' is not valid"
The code is as follows. Or ss there anyway to loop thru the checkboxes and populate them in another DatagridView2?
I've got a routine that checks a website my my external address. What I'd like to do is loop through the string just to get the first 15 numbers and full stops (periods). But that isn't my question, my problem is I've got this routine that isn't building because of a string conversion issue. I don't know how to correct it.
a user will enter a number, n, which ranges from 1 to 30. they will also enter a "P" or an "S" (sum or product). depending on which was selected, it will calculate the sum or product of the numbers from 1 to n.i'm having a conversion error on line 5 stating "Conversion from string "S" to type 'Double' is not valid." [code]
I'm trying to add a new record to my database but i keep getting the message - "conversion from type DBnull to type string is not valid". I think its something to do with the Employee ID when VB attempts to save it to the database my code is below
Imports System.Data.OleDb Public Class Add Private Sub DisplayRow()
I now have SQL Parameters set up and I'm using them to save/delete/add my data. This all works well, except when it's trying to save a combobox to the datatable it appears with the error above.Majority of my comboboxes have datasources, and the valuemembers of these are the actual list items, not the ID's of the list items.I'm not sure why this error could be happening, I'm fairly sure I've connected everything to the binding source correctly; I've checked it a few times.Does anybody know what the cause of this could be? I've looked around a bit and I haven't found much
Error 1Server Error in '/ Application. -------------------------------------------------------------------------------- Conversion from type 'DBNull' to type 'String' is not valid. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Conversion from type 'DBNull' to type 'String' is not valid. Source Error: Line 64: Line 65:
I am getting the error "Conversion from type 'DataGridViewTextBoxCell' to type 'String' is not valid." When trying to display a cell from DGV in a listbox.I have my variable for the cell reference as follows:
Dim a As Object a = DataGridView1(4,1)
To insert it in the listbox as follows:
lstLetter.Items.Add(String.Format(a))
I tried:
lstLetter.Items.Add(a)
This will not actually display the entry inside the referenced cell, it shows this in my listbox instead:
I was tried to get quantity from db make use of the selection in list box. I got answered with listbox1. If i selected the item in listbox1 the quantity would appear in textbox1. But in this same code will not work for listbox2 with textbox4.. Here i given the code...
$Con.open() $Dim cd as new oledb.oledbcommand("Select Quantity from tlist where tool_name"& "'"listbox2.selecteditem & "'" & "", con)
[Code]....
Here i got the error as "Conversion from type DBNull to type string is not valid"
I've been getting this error when pulling data from a recordset. It is coming from a null entry and as a newbie to VB2008 I'm not sure how to get around this.
here is my code lblShipping.Text = reader("CARRIERCODE")
the error:Conversion from type 'DBNull' to type 'String' is not valid. Basically what i'm attempting to accomplish is to see if there is anything in that field. If so put it into the text box if not leave it blank.
We get this error: Conversion from type 'InternalField' to type 'String' is not valid. When we get to this in our Dim fname2 = fname args.Graphics.DrawString(fname2, New Font("arial", 8), Brushes.Black, 5, 5) fname is a nvarchar variable from a recordset. It's just a name.
I use following codes to retrieve data from table, but get error Conversion from type 'DBNull' to type 'String' is not valid.
str = "Select * from gpass where vou_no= " & Val(Me.txtGat.Text) & " And Date = '" & Me.txtDat.Text & "'" dt = GetTable(str) If (dt.Rows.Count > 0) Then
I am importing an Excel spreadsheet, turning it into a dataset and inserting the results into SQL Server (only 100 rows).
I am having an issue with one of the date columns in Excel, which can have a value or not. The "F" column is the one that may be blank and this is the error I get: Conversion from type 'DBNull' to type 'String' is not valid.
How can I add a check to the Dim F As Date = CDate(row(5)) to handle a null?
VB ' The use of letters instead of ' more descriptive variables is ' strictly for this sample peice
I have the following code to use Words spellcheck feature on a RTB. Once you pick the correct word in the spellcheck box and press change I get the error on th efollwoing line
At run time my application gives an error of "Conversion from type "DBNull" to type "String" is not valid. In my form only one field - Add_info is an optional field which might be filled or not by the user. Before, I had an error when an apostrophe was used so i updated the code as highlighted below. This in return removed the apostrophe error but generated an error whenever there is an empty additional field. [code]
i encounter this error while passing a string as datatable.
I populate combobox1 with tables/sheets from excel and each table has datarows which i want to get the data and import to sql corresponding table, so, I declare
Dim XLSTableName as String = Combobox1.SelectedItem
And I encounter the this error : Conversion from type 'DataTable' to type 'String' is not valid
how do i return the combobox1.SelectedItem as Datatable cos if i declare
Dim XLSTableName as DataTable and pass it to the select Command thus:
Dim objCmdSelect As New OleDbCommand("SELECT * FROM [" & XLSTableName & "], ODBConn)
to obtain the dataRows I got the following error: operator '&' is not defined for types 'String' and System.Data.DataTable'