Deployable Shutdown - Application Failed To Initialize Properly
May 18, 2010
I'm trying to create an app with a GUI to run at a specified time (handled by Altiris) to run a locally stored program to give the user a specified amount of time to close the task, otherwise the computer is forced to log off destroying any unsaved information. The code I have looks to work, when built it shows no errors, but when I pull the executable (using VS 2010 Express) after the time expires I get a Windows Application Error for the program stating:
The Application failed to initialize properly (0xc0000142).
The code I'm running is:
Imports System
Imports System.Timers
Public Class Form1
Private Shared Shutdowntimer As System.Timers.Timer
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code] .....
I am trying to install my vb.net application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
i have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
i made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?
why i can open my .exe project and when i send to my friend when he press on the exe it shows this the application failed to initialize properly (0x0000135) you dont know why ? ...
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
So i've coded a simple vb project in MS VB 2008. I then copied the contents of the 'bin/release' folder, and tried running the program on another machine. I'm getting 'the application failed to initialize' error. I'm assuming this is because i'm missing certain files, dll's or something. Or should I have copied the obj/release folder?
i am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
I have created a web application in ASP.NET using VB.NET as code behind file. I am using a COM object of ProvideX.Script class to connect to Sage MAS90 ERP. Everything was working fine in visual studio 2010. Now when I moved to the deployment phase, the problem gets started. I deployed my application in Windows Server 2008 in IIS7. When I run the application I get the following exception.[code]...
When i try to run my app I get this exception "Configuration system failed to initialize"I recently added a datascource to the app and am assuming that something has gone wrong there but it was all working ok and then this error just started.I assume it's a problem with my appconfig file which i'll post here I cant see anything wrong with it but.!!I've tried deleting the ConnectionString Section but nothing helps and i cant run my app at
I have an .NET winforms application(A). I am calling another .NET exe(B) file from the winforms application. When executes, it throws the following error.
I haven't kept any configuration file for the second exe file(B).
I have made some custom .dll's or components and then I downloaded custom webkit component and it didn't work perfectly(I mean that I always get some error code with this error: An error occurred creating the form. See Exception.InnerException for details.The error is: Failed to initialize activation context. When I try to debug the project). And if I have made a new project, and make a component with user control, and I haven't saved it yet, it will work fine, but until I save it then it will give me a designer error.
Have you tried configuring ASP.Net Membership together with Enterprise Library DAAB? When I run my application it throws the following exception: "Configuration system failed to initialize" It seems that it encounters a problem that normally don't occur when I setup my configuration file.
I have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
I've been having an error with my Visual Studio 2008 with .net framework 3.5 Sp1. I am creating a project, and it would run properly until after a while when I try debugging the project I would get a error message that says: "Error while trying to run project: Could not load file or assembly 'Name_of_Project' or one of its dependencies. The module was expected to contain an assembly manifest."
Also the .exe file that it creates in the bindebug folder gives and error that says: "The application failed to initialize properly (0xc000007b). Click OK to terminate the application." These errors after a format of the machine would disappear for awhile but not indefinitely.
I am the author of a freeware that have been hundreds of downloads without problems... and only ONE user reports to me the error in object.Since the exception is handled, tanks to his report I can realize that the error is generated when is read this code line:
If My.Settings.Opened = True then
Now the question is: why a single PC over hundreds have problems gaining access to My.Settings?His PC has installed XP Home Edition SP3, my program is compliled for Framework2.0.
I have a Class called SocketSvr which handles an asynchronous socket server. It is called via the BackgroundWorker from my main form. Basically, I just want it to display my socket data information inside a textbox in the main form, and have a server start/stop button available on the main form to do those things.
Here is the code from Form1.vb:
Public Class Form1 Dim WithEvents Socketsvr As New SocketSvr Private Sub ToggleServerButton_Click(ByVal sender As System.Object, _
[code]....
I am uncertain how to properly shut down requests from the client when the StopServer() function is run. In the code above, I place a cancellation queue for the background process. The funny thing is that once StopServer() is run, it will accept one more connection, then stop accepting thereafter.If I remove the following line from the code above:
-- it crashes when I attempt to start the server a second time (complaining that I cannot reuse the socket, obviously) My guess is that I need to add something to the bw.CancellationPending call on the background worker?
This problem seams to be in other forms without any concrete solutions. I figured id post it here since i am running into the same problem and i am sure you have at well at some point (if not then you will soon...lol). The problem is this error is appearing when i open a form in designer mode.
When I start VS2008Prof I get a Package Load Failure "Package 'Microsoft.VisualStudio.Xaml' has failed to load properly". Repairing VS and resetting ('devenv /resetsettings') it did not help.
this error is appearing when i open a form in designer mode. A picture showing what happens to VS when this error occurs.The error code is:One or more errors encountered while loading the designer. The errors are listed below. Some errors can be fixed by rebuilding your project, while others may require code changes.Unable to cast object of type 'System.Diagnostics.DebuggerNonUserCodeAttribute' to type 'System.Attribute'.
Suddenly today , when I started my computer and went on to open the VS , I got this strange message: Do you know what it might mean ? I didn't installed anything on my PC for a long time, so I can't think of anything ...
To the board: Lately I've been getting Runtime error 3447 ("The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32 for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error") when attempting to open a certain program (not one that I designed, just downloaded and installed). I installed this program in January 2009, but this error began happening only this past July. someone else to information about the files vbajet32.dll and expsrv.dll. One site said that the problem was probably caused by the file expsrv.dll being absent, but I checked my System32 folder, and it's there. As far as I can tell, it has always been there (the computer was made in 2008, and as I said the program had always worked before). Vbajet32.dll is also there. I tried uninstalling and reinstalling the program, but error 3447 still occurs. I also tried uninstalling the program and installing an older version, but 3447 is still there.
I tried replacing expsrv.dll, thinking it might have been corrupt, but that didn't help, and I cannot register that dll anyway. I can't figure this thing out. Both of the files are there, and I didn't change any settings or anything anywhere between last January and this July. By the way, I am on Vista.
Due to some bug I had deleted the whole bin folder *with* config files, yesterday but after doing so it was working fine but today the program always throws this exception:onfiguration system failed to initialize. Even when I have recreated the configuration files. The exception is thrown as soon as application starts.
I'm trying to connect a remote mysql database. I'm doing it from a vb.net 2005 application with a connector mysql.data.dll What's happening is, suppose if I try to connect thrice it connects twice and once throwing an exception that says A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. there's nothing wrong with the code, otherwise it would never have connected
