Dim handler As PropertyChangedEventHandler = Me.PropertyChanged
but it does not work in vb... I get this error:
Error1'Public Event PropertyChanged(sender As Object, e As System.ComponentModel.PropertyChangedEventArgs)' is an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event.
I have a Winform application where i added picturebox's to a flowlayout panel dynamically from code. I have successfully managed to add a handler for doubleclick and click events the problem i have is that when i add both together it only seems to work with the click event and not the double click. where I could bee going wrong? Iam using VS2008 .NET 3.5 my code looks a bit like this :
Public Class Class1 Dim WithEvents picturebox1 As PictureBox Private Sub Brochure_Creator_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
I am using timers in a windows service and facing problem that anytime some exception happens ( say i unplug LAN wire from my computer ) service stops running, What i am expecting is that service should keep on running as i am catching generic exception which should catch the exception on one tick event and again work (next tick)when i plug in LAN wire (i am plugging/un plugging ) LAN wire as this service is reading database from LAN so i want to replicate a failover scneario)
I have a textbox and a button. Initially the button should be disabled, but when I change the value in the textbox I want to enable the button. I tried to write a trigger.
I have a class with two descendent classes (child, grandchild):[code]When a property changes in the Measurement class I raise a OnCrucibleOxidizedMassChanged event:[code]However, the OnChanged sub gets called twice, even though I only assign a value to CrucibleOxidizedMass once.
I have constructed a graphical user control using VS2008 and I am testing it in a solution that includes the control project and a sample form with the control and some configurable settings. In the test application I have persisted a few of the control property values in user settings.
I am using a standard template for all the property Sets in the control:
Set(ByVal Value As Integer) If my[-propertyname-] <> Value Then my[-propertyname-] = Value
[Code]....
Whenever the user changes a property in the control using a procedure in the test app, the PropertyChanged event is causing a GET (settings value) and SET (control property) for every property of the control that has been persisted by the test app, including the property for which the user just made the change.
I can understand that the settings code is listening for PropertyChanged events in order to keep the settings values updated (and I can trace the Get (control property) and Set (settings value) that is executed immediately after the property changes), but why should it also hook in a complete re-initialisation of all control properties every time the user changes one control property?
These classes are entities in a LINQ to SQL file. In the Measurement class, I raise the PropertyChanged event when the CrucibleOxidizedMass property changes:
Private Sub OnCrucibleOxidizedMassChanged() RaiseEvent PropertyChanged(Me, New ComponentModel.PropertyChangedEventArgs("CrucibleOxidizedMass")) End Sub
In the BaseSample class, I want to respond to the CrucibleOxidizedMass PropertyChanged event in any of the descendent Measurment instances. How would I do this?
I need some help to understand my options to get this working. I try to update a textbox control by a property-changed event from a class variable. I've digged around for a day and have a vague understanding that this can be solved in three ways:
1. Using some "if InvokeRequired", "Invoke" code in the handler method 2. By programming a special delegate class for this variable 3. By using a databinding directly linking the control (textbox) to the class event
Now.. Are these options correct? And would it be possible to get some help to show these three solutions in actual code (relevant to mine)? I can't seem to manage to sort all the information to a working code. Also, what are the pros and cons of the different solutions?
As my code stands now, it's obviously none of the above, as it gives a cross-thread error, as indicated.
I'm seeing a strange build bug a lot. Sometimes after typing some code we receive the following build error.
Class 'clsX' must implement 'Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs)' for interface System.ComponentModel.INotifyPropertyChanged'.
And
'PropertyChanged' cannot implement 'PropertyChanged' because there is no matching event on interface 'System.ComponentModel.INotifyPropertyChanged'.
Those error should never go together! Usually we can just ignore the exception and build the solution but often enough this bug stops our build. (this happens a lot using Edit and Continue which is annoying)Removing the PropertyChanged event and retyping the same code! sometimes fixes this.We're using a code generator that causes this error to surface but just editing some files manually triggers this exception too. This error occur's on multiple machines using various setups.
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean) Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
remove an event handler from within the event handler?
I have a class that gets data from a hand scanner. When the scan is complete and the data is validated, the class fires a custom "ScanComplete" event and returns the data in a custom EventArgs.
In the calling program, I'm creating an instance of the scanning class and adding a handler for the "ScanComplete" event. In the event handler I get the data that was scanned and then remove the handler.
It seems to be working but it feels wrong to remove the handler while I'm running inside the handler. Will this cause a problem?
I found on msdn samples and modified (add Thread.GetDomaind.UnhandledException)
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _ Public Sub Main() ' Add the event handler for handling UI thread exceptions to the event.[code].....
It appears that my favorite thing in the world is tackling projects that are beyond my current knowledge and abilities. I have a little project that I am working on which is a simple image viewer stocked with (upon completion) your standard Load..., Next/Previous, Zoom In/Out, Actual Size, and Full Screen capabilities. However, I am running into a few snags:
(1) I've been able to get my "Load..." button to display a file dialog box, but I cannot seem to get a working filter (with which only image file types are allowed to be selected) in working order.
(2) I have a PictureBox object (entitled PictureBox1) that displays the image selected via the file dialog box, but it loads images in their full size (1:1/100% zoomed) state without scrollbars, etc. to allow me to navigate the loaded image. I would like to have it load the image, initially, to fit within the dimensions of PictureBox1 and from there be able to zoom in/out via my "Zoom In/Out" and "Actual Size" buttons and be able to scroll if the zoom level is beyond the dimensions of PictureBox1.
(3) It dawned on me that I haven't the faintest idea how to get my "Next/Previous" buttons to allow the user (me) to navigate, in succession, the images contained in the folder in which the currently loaded image is stored. [code]
If it is deemed that this thread is inappropriately requesting help, I ask that it be locked/deleted quickly as I recognize that this is a large community with many discussions going without need of unwelcome posts.
I don't understand why I only get 1 Message Box in the following case when I run using (CTRL-F5 - Run Without Debugger) in VS2010:
Public Class Form1 Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load ' Add the event handler for handling UI thread exceptions to the event. AddHandler Application.ThreadException, AddressOf ThreadExceptionHandler
Is it possible to determine using VB.NET whether a certain event has any handlers attached to it? I don't own the event, in this particular case I want to know which of the items in a Windows.Forms.MenuStrip have their ToolstripMenuItem.Click event handled.
Here is a problem with focus. I have a container(e.g. Panel) which contains some controls. How can I detect the focus event whenever any of the controls in the container has received or lost focus? Do I need to add handler for each control?
example: If all controls in the container have no focus, the container will report as inactive; if one of the controls has focus, the container will report as active.
I designing download manager in vb.net. Which supports various file premium hosts[rs,hotfile].... My need is how to get the download handler of IE. When user navigate the link in IE the download link wil be catch by professional application like(dap, idm).... How to achieve in my application? I meant how to get redirected link?
I ma using DevExpress controls (which doesnt matter for this example). I have a lookupEdit control and I never want the EditValue_Changed event to fire. Can I use RemoveHandler to do this? If so can someone give me a code example of doing this? Should I put RemoveHandler in the load event of the user control I am creating? Or does it go in the EditValue_Changed event of the lookupControl?
How I can run handler from one application to another, for example: In application one i have form1 and button. In application two I have also form1 and button. Now how I can run handler for button on form1 in first application from applicaton two?
I am trying to add a Handler, but it do not work. what am I missing? I getting this error.
Dim EditingTextBox As New TextBox Dim Save_Button As New Button Dim Cancel_Button As New Button Private Sub Labels_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label1.Click
I've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1 master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
Is it possible in VB.NET to easily write an event handler that will handle every event that fires? I'm wondering if one could make a logging system using something like this.I'm wanting to do something like (in pseudocode):
Public Sub eventHandledEvent(ByVal sender As Object, ByVal e As EventArgs) File.Write(sender.EventName) End Sub
I realize it would be slow, but it wouldn't be for a production system, only as a development tool.
I am trying to upload images using generic handler as shown below and I have a normal aspx page where I am showing all the uploaded images after uploading.Everything is working fine.
CODE:
Now I want to add a session variable by generating a random string and add the uploaded images to the newly created random string.
1.I have seen this Question on SO to use System.Web.SessionState.IRequiresSessionState for sessions and how do I create a folder with that and add my images to that folder after doing that how do I access this session variable in my normal aspx page.
2.(Or) the better way is create session variable in aspx page and pass that to handler?If so how can I do that?
3 .I am trying to find the control from my handler.Is that possible?If anyone knows how to get this then also my problem will get resolved so that I am trying to create a session from m aspx page.
how to add one event handler name clearallboxes that handles the TextChanged event for both examples(Customer text box and Total text box ) This event handler should clear the values in the text boxes that display the results.
i have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init If ViewState.Item("nameload") IsNot Nothing Then If ViewState.Item("nameload").ToString = "True" Then
So i had a some objects on my project like a few textboxs and buttons, which all had code tied to. For example text1 button1. I delete the two objects (not code) from the project and then paste a text1 and button1 (same exact names) back into the form. now when you click button1 or text1 you get
"Private Sub Button7_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button7.Click"
rather than the code all ready in the project for button7. The reason im doing this weird situation was because i goofed some of the object settings and was copy and pasting the old objects from a backup version.
