I was wondering how I can make textbox1 get divided by textbox2 at the click of button1. The number will go into textbox 3. I was also wondering how I can make the number round up or down. I also want all three text boxes to only accept numbers.show me the code in an easy to read format.
View 2 Repliesi am writing my very first program with visual basic 2010. my question:
textbox1 + textbox2 = textbox3 if i want to add textbox1 and textbox2 together and display the value in textbox3 WITHOUT creating a button for a command, what do i have to do?
basically, i want the value to appear in textbox3 automatically when i input textbox1 and 2.
I have three textbox textbox1, textbox2, textbox3where
Textbox1.Text = 739
TextBox2.Text = 2.95
TextBox3.Text = Val(TextBox1.Text) * Val(TextBox2.Text) / 100
[code].....
Lets say that I had three TextBox's and they are named TextBox1, TextBox2, and TextBox3, is there a way to do like TextBox And Rand(1,3).Text = Nothing? Something similar to this where you click a button and it will choose at randomly a textbox to clear?I know I could do like Dim Number = Rand(1,3)if Number = 1 Then TextBox1.Text = Nothingend ifif Number = 2 Then TextBox1.Text = Nothingend ifor use else if and such, but I have 12 different textbox's, not three, so, I want to shorten the code, if you could do something like TextBox And Rand(1,12).Text = Nothing that would defenitely be way shorter, can you do anything like that to put together "TextBox" and the number to reference the control? I am not looking to use the full controls list to search for the right control nor to make an array that contains the controls, I just want to reference them without adding extra arrays or searhing for them.
View 2 Repliesi have three textbox in my program
How do i update my textbox3 Data like this
textbox3 line1 = textbox1 line1 + textbox2 line1
textbox3 line2 = textbox1 line2 + textbox2 line2
textbox3 line3 = textbox1 line3 + textbox2 line3
textbox3 line4 = textbox1 line4 + textbox2 line4
textbox3 line5 = textbox1 line5 + textbox2 line5
i have three textbox in my program. How do i update my textbox3 Data like this
Rich_textbox3 line1 = textbox1_line1 + textbox2_line1
Rich_textbox3 line2 = textbox1_line2 + textbox2_line1
Rich_textbox3 line3 = textbox1_line3 + textbox2_line1
Rich_textbox3 line4 = textbox1_line4 + textbox2_line1
Rich_textbox3 line5 = textbox1_line5 + textbox2_line1
it will continue to last line of textbox1
I have got the following code for if in textbox1 the would be appear as 10:10:00 AM and in textbox2 the time will appear as in 4 hours time slots automatically as 06:10:01 AM ..if the textbox2 time will be 06:10:01 AM then MSg box will appear that "You can not registered to this site because the 4 hours time slot will be over " [code]Remember in textbox1 the time would be any .....and textbox2 will auto generate time according to textbox1 to maintain 4 hours time slots between textbox1 and textbox2
View 1 RepliesI want to make it so that Textbox3 is always 1 less than TextBox2, how would i do that?
View 1 RepliesIf i type in textbox1 textbox1.text="Delhi-manali"Then on button click event
textbox2.text="Delhi"
Textbox3.text="Manali"
using vb.net
[code]....
Let's say that you have a texbox labeled TexBox2 and you don't want it to be seen when the program runs because TextBox1 pulls information from TextBox2 and it shows up inside of TextBox1. How would you go about doing this?
View 1 RepliesI am basically trying to create a basic math calculator, the basic inputs are in TextBox format. I have made the basic calculator ok but would like to have a MsgBox pop up if TextBox1 is > TextBox2 these are both TextBoxes which have data entered in them. Hope this explanation makes a little sense. Below is my attempt at this!
Private Sub MsgBox_Load()
If (Val(TextBoxDPID.Text) > Val(TextBoxDPOD.Text)) = MsgBox("DPID can not be Higher then DPOD",
[CODE]..................
I want to display the gmap ..if i enter City name in textbox1 and another city name in textbox2 then the gmap will display and the both cities will be highlighted in the gmap with its distances ...i wanna do this using vb.net, asp.net.
View 1 Repliesi m using vb.net 2008.Example we have textbox1 and textbox2, question is how to show text from textbox1 into textbox2 but getting text line by line not all text from textbox1.
View 3 RepliesPossible Duplicate: cancel plane ticket before 4 hours of departure time if dep time is 08:00:00 AM then Passengers can cancel ticket till 04:00:00 AM ??
I have two textboxes textbox1 and textbox2 in asp.net(vb) webform I want If in textbox1 the time would be appear as 08:20:20 AM Then in textbox2 the time would be automatically generated 4 hours before as compared to textbox1 i.e ( the time in textbox2 the time would be appear as 04:20:21 AM )
Means simply logic i want ... if the time in Textbox1 is 08:00:05 PM then autogenerated time in textbox2 will be 04:00:06 PM Means whatever the time in Textbox1 the textbox 2 will autogenerate time in 4 hours time slot.
Private Sub NumericUpDowns_ValueChanged(ByVal sender As System.Object, ByVal e As
System.EventArgs) Handles _
NumericUpDown1.ValueChanged, NumericUpDown2.ValueChanged, _
NumericUpDown3.ValueChanged, NumericUpDown4.ValueChanged, _
[code].....
I have converted the fare field in gridview1 to display fare | seats in same cell as displayed below...
i want when user select/ click on Book button row then the fare amount will be diplayed in textbox1 and seats will displayed in Textbox2
Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.SelectedIndexChanged
Textbox1.text=GridView1.SelectedRow.Cells(6).TextToString
End Sub
i have been trying to combine the items in textbox1 with textbox2 and then displaying it in textbox3 with a colon in between but i can not get it to happen. i have tried searching it but cant seem to find any answer.
View 11 RepliesI have textbox1 with 9 characters in.
How can i copy only first 7 characters to textbox2?
i want to display text from textbox1 & textbox2 into a label when click on button. the code is
label1.text = textbox1.text & " " & textbox2.text
i using the "" for spacing. is there any other way for doing spacing?
I would like the focus to pass from TextBox1 to TextBox2 when I press the Return Key.
View 4 RepliesI have Tow TextBoxes . Textbox1.Text= "Hello" Is it possible to put this code TextBox1.Text in TextBox2 control Msgbo(TextBox2>Text)
View 12 RepliesI have only really gotten into VB, so am an amateur.I have done quite a lot of search, and have read a lot of conflicting data which has yet to give me the result I'mafter.I have:Windows Form with many fieldsdatabase with 2 lots of data for reference.What I am after if for TextBox2 to give a result from the database when Textbox2 has user input.I have tried If TextBox1 = [Code] then TextBox2 = [Name] from db0 Names$
View 6 RepliesHow to Save Your Settings(textbox1 and textbox2) [Vb 2008]
View 3 RepliesHere is an example of the .fil or CSV I am reading from. The numbers in this example are arbitrary and only serve as identification.
// A, B, C, D
000, 9.000, 9.000, 9.000, 9.000
0.000, 0.000, 0.000, 0.000
[code]....
I would like to display the values of 1.000 and 3.000 in Textbox1 and TextBox2.Next, I would like to multiply the values 1.000 and 3.000 with variables Y and Z to give products J and K.I would then like to display values J and K in TextBox3 and TextBox4.Finally, I would like to take the CSV file and replace 1.000 and 3.000 with values J and K, respectively, and save.
I'm stuck with how to copy all lines from textbox1 to textbox2, in 1 Hz. This sounds maybe odd, but my thinking was to do it in a timer set to trigger every 1000ms. textbox1 Line1 should be appended to textbox2 line1.....until theres no more lines. Of course a loop will do this, but right now I'm stuck. This will of course add all lines every time the timer ticks:
[Code]....
I have two textbox in my application.
Textbox1.Text="19-Jan-2010"
Textbox2.Text="Jan 2010"
May I know how can I compare that Textbox1 and Textbox2 text is within same month and same year?
How can I get the sum all the values a user enters into TextBox1 to display that sum into TextBox2.The user is going to enter one value one by one. The user enters '1' into TextBox1, therefore, TextBox2 should display '1'.If the user than enters '2' into TextBox1, TextBox2 should display '3'.If the user enters '2' into TextBox1, TextBox2 should display '5'.And so on.TextBox2 should only display one value at a time, not one after another.I am using double because I need decimal places.I have a ListBox1 where it displays all the values entered by the user in rows one by one, but I prefer not to use the ListBox1 to get the sum of all the values entered in TextBox1 and to have TextBox2 show that sum. Because in that ListBox1, I have few other things in there, like Strings, which will not allow the sum of all the values entered in TextBox1 to be calculated and displayed in TextBox2.Not sure if this matters or not, but I thought it might.So only need TextBox2 to have all the values entered in TextBox1.If 1 was entered in TextBox1, TextBox2 shows 1.Then 2 is entered in TextBox1, TextBox2 will show 3.
View 18 RepliesThis should be pretty easy, I've been experimenting, just can't seem to figure it out. I'm trying to make a MsgBox popup with the text that is in Textbox1 and Textbox2. I want the MsgBox to display both values...
View 3 RepliesI have two textboxes on separate ajax tab panels. I was trying to setup a javascript onkeyup attribute to set the value of textbox1 to textbox2 or vice versa depending on which they typed in. If the textboxes are not on the tab panels then it works just fine but I cannot get it to work when the two textboxes are on separate tab panels. Here is what works outside the tab panels.
Public Function AddOnkeyAttributesControl(ByVal ctrl1 As TextBox, ByVal ctrl2 As TextBox)
ctrl1.Attributes.Add("onkeyup", "javascript:form1." & ctrl2.ID & ".value=form1." & ctrl1.ID & ".value")
ctrl2.Attributes.Add("onkeyup", "javascript:form1." & ctrl1.ID & ".value=form1." & ctrl2.ID & ".value")
End Function I just call this function with the two I want to link as I said it works outside the ajax tab panels but not on the tab panels. i am sure it is something to do with the way that the tabs are rendered but i don't know where to start.
I'm running some if statement but I have hit a brick wall with what I'm doing and trying to do. If textbox1 has a value then I run different coding to if textbox1 and textbox2 have a value - Textbox1 will always have a value. [Code] What I'm trying to do is add an additional statement if both Textbox1 and Textbox2 have text, then to run code 1 if the last four characters in textbox2 ends in .jpg else to run code 2. [Code]
View 3 Replies