what is code i should use if i want to prevent user not to leave empty word in text box after user click save button. i am using visual studio 2005, database sql 2005.
View 2 Replieswhat is code i should use if i want to prevent user not to leave empty word in text box after user click save button.Oh ya, i am using visual studio 2005, databse sql 2005 .Here is my code
Private Sub btnregister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnregister.Click
If MsgBox(" Are You Confirm", MsgBoxStyle.YesNo) = vbYes Then
[Code].....
I am trying to prevent the User from proceeding if a specific text box is empty. All of the following lines of code SEEM TO work:
If txtTitle.text = "" Then.....
If txtTitle.Text = Nothing Then.....
If txtTitle.text = Nothing Then.....
(followed by a message box advising of the need for input)
The problem is, if the User enters a space (either accidentally or intentionally) all three of the above recognize the space as a valid entry.
what is code i should use if i want to prevent user not to leave empty word in text box after user click save button.Oh ya, i am using visual studio 2005, databse sql 2005 .Here is my code
Private Sub btnregister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnregister.Click
If MsgBox(" Are You Confirm", MsgBoxStyle.YesNo) = vbYes Then
[code].....
I knew that the VB.NET has an error handling with Try..Catch statement. As I know, if there is any runtime error happen in the Try routine, it will only throw the error in the Catch. But what if there is no runtime error and I need to throw an error when I found the value of the calculation reported is invalid? Like for VB6, we can write the 'On Error Goto ErrHandler', so in VB.NET, how should we define similar method? For example, there is a simple mathematical calculation where the division of two numbers will never > 5. So if I found the result of the division is greater than 5, I want to throw an error to say the result is invalid.
View 5 Replieswhat is code that prevent user to given number less than 8 in the text box. If the user give less then 8 number then message box box will appear which show Minimum Number is 8. Here is my code
Private Sub btnregister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnregister.Click
If TELEPHONETextBox.Text.Trim.Length = 0 Then
MsgBox("Please Enter Phone Number", MsgBoxStyle.Question)
Me.TELEPHONETextBox.Focus()
[code].....
How can I set the column width and leave the top 10 rows empty in order to insert an image into my Excel report?
Here is my code:
If ComDset.Tables(0).Rows.Count > 0 Then
Try
With Excel
[code]....
I have read through some of the other posts and I think what I want to do is slightly different. I have a combo box in VB ExpEd2010 that I want to allow the user to only select from the drop down list. However, I want to be able to set the value in the combo box to something that is not in the list. So the drop down list will have values 1, 2, 3 but I want to be able to write to the same combo box a value of 2.4, 1.2, etc.
View 13 RepliesThis is my database: Here is my
[Code]...
I have a report parameter which looks like this: 01.01.2009 00:00:00.Its a date (as string), as you might have guessed :). The problem is, this param can be an empty string as well. So I tried those expressions:
=IIf(IsDate(Parameters!DateTo.Value), CDate(Parameters!DateTo.Value), "")
=IIf(Len(Parameters!DateTo.Value) > 0, CDate(Parameters!DateTo.Value), "")
Both dont work and the value for the textfield where I print the expressions result is always #Error. As soon as I remove the CDate stuff, it works, but I have to use it. IS there another way to achieve that? What I want is to display nothing if its not a date or the date (format dd.mm.yyyy) if its a date.
Prevent an empty column in Excel to be loaded into a dataset column?
View 3 RepliesI have a DataGridView to which I've set a list of objects to the DataSource. (I'm in VS 2005 using VB.) I created the DataGridView by creating a Data Source of type AssetIdentifier and dragging that Data Source onto my form. I want to update the DataGridView when the selection in either a combo box or another DataGridView changes. (Below I'm considering a click in another DataGridView.)
The following works:
Public Class dlgShowAssets
' class member variable
Private assetIdList As List(Of AssetIdentifier)
' pertinent subs and functions
Private Sub RefreshAssetIdentifierDataGridView()
[Code] .....
In this case, I always knew that assetIdList would have at least one element. I'd update the list, and reset the data source of the DataGridView to that list, and all was well. When I applied this to another situation, for which I couldn't guarantee that the list would have at least one element, things would work fine as long as I had at least one element in the list, but if the list became empty, the DataGridView threw System.IndexOutOfRangeException a number of times.
The rows in the DataGridView would not go away if I went from a non-zero number of elements to zero. I tried a workaround, which was to remove all of the elements, add one "dummy" element, and then re-bind the list to the control and it still didn't work. Also, following all of those exceptions, I'd get other similar exceptions when I hovered over the cells in the DataGridView. Some of the members of AssetIdentifier were "Nothing" but I fixed that in the constructor, and the exceptions still occur.
In my datagridview I have 3 columns, lets say Column1, 2, 3.
Column1 is Column2 / Column3.
Problem I have is I'm trying to prevent an error if the user types "0" into Column 2 or 3. I can prevent against it dividing by null or a letter by the following codes:
[Code].....
I am building a search engine in vb.net which would have to search for a word entered by the user in 40 text files within the project directory. It should return the results as the total number of matches (text files) and the number of times this word is in each file.
View 5 RepliesI've got a (hopefully) quick question. I've got textboxes attached to a binding source on one of my forms, and when I add, then clear, the data for the next entry to be added a small problem arises. If the user has previously entered something into, for example, Textbox3 and the user does not have the data for Textbox3 the user cannot move to the next field unless something is entered into the box.
[Code]...
I have set the datagridview.cellvalidating events. I want the user inputing in the cell and when error, the cursor cannot leave the cell when user key "TAB" or click in other where in the first time.But I find that it does not work in the first time. Until when I click the same cell in the second time, it trigger the action preventing user from leaving the cell and show the error message.
View 4 RepliesI need to pull a random word from a text file in my resource folder (visual Studio 2010) and then have a user enter a letter to see if it is in the word. Yes, Hangman game. There is more, but right now I need to pull from that text file for a start. I know what I have is not even close to right under "Get Word Button", but I'm kind of confused about the process.
Public Class hangMan
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
Dim word As New Random
End Sub
[code]....
I would like open a word document in VB. However the Word document may have an "openpassword. How can VB:a) test to see if there is a password, b) if there is a password then pass it to the open function and c) get confirmation that the password is correct and the file has opened?
View 1 Replieswith the code i made till now found below i'm putting a word in txtEnterMsg and this goes into position 5 of the letters i have in txtLetters. How can i put each letter of the word i write in txtEnterMsg in a different index.eg--if word is 'hello' put 'h' at index 5,'e' at index 13.
View 8 Replieswhen i leave the tab and move to another tab and return to last tab
this message show to me
http:[url].....
I have two comboxes inside a panel and have the following code which generates an error "Object reference not set to an instance of an object." on the line marked with *****
Private Sub cboJob_MouseHover(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles cboJob1.MouseHover, cboJob2.MouseLeave
[Code].....
All i want to do is write some text into word... some of the text is normal text the other is bold... how do I achieve this?The samples I have seen, they either do normal text or bold.. but in different lines utilising InsertParagraphAfter()I need to have both in the one lineie how do i do the following line? using vb.net and word automation (word 2010)
View 2 RepliesI get a 'Conversion from type DBNull to String is not valid' error when I proceed to insert the row with a null cell value from my program to MS Sql Server even if the column is already set to accept null values in the database. How do I solve this? FYI I'm using an unbound datagrid, and I get all the screen values during runtime.
Property SerialNo()
Get
Return strSerialNo [code]...
The problem is that if you never enter anything into a cell for a new row then that cell is never validated. This is a problem because I have columns that should not be null. I am doing the check in the row level validation and storing the information about which cells are empty that should not be empty. The row level validation works fine and the row level validation error indicator goes on,(red exclamation mark at the beginning of the row) but I also need a visual indicator on the individual cells that are in error.
I am thinking that setting the HasError property for the cells that are in error should cause them to display n error style (the default red border). Is there a way to this this either from XAML (perferably) or from code?Alternatively I could cause those cells to re-validate when the row editing is finished. Does anyone know how to do this?
I need to read an xml document from a database record into an XDocument object in order for it to be deserialized. So that the deserialization will work, I need to apply a specific namespace to each of the level 1 elements. So XML looks a bit like this:
[Code]...
How do I prevent the blank/empty namespace being added to each child element of the element to which the required namespace has been applied?
I want to change the language when i enter or leave text box
View 2 RepliesI have a datagrid that will be accepting data from an external measuring device via the serial port. The grid is also open to editing records as well. Part of the process of making this grid user friendly is to intercept the "enter" key and move to the next cell until there is a value in the cell. This is only for some cells, other cells can be blank. I have worked out how to intercept the "enter" key from another post on this forum. Here is the code:
[Code]...
I have a TextBox control being used to capture an IPAddress from the user.I want to be able to allow them to change that IPAddres at which point the new value will be utilized by the appropriate .NET socket class to ping that new address.What other event is used with TextChanged to indicate that the user is done making changes to the TextBox. The Leave Event?
View 3 RepliesI have an object, say Order where if an error occurs, it raises the ErrorOccurred event. If I'm running some code in say, the codebehind for a .aspx page with an public Order registered as WithEvents and I want to check to see if an error has occurred before I run more code, how do I do this? I can't simply check theOrder.ErrorOccurred. Do I have to create a local boolean flag that switches over in the event handler (OnErrorOccurred)?
Example:
Public WithEvents theOrder As New Order
Public Sub DoStuff()
theOrder.DoSomething()
If theOrder.ErrorOccurred Then
[code]....
I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.