I am having problem deleting my data on click event. Here is my
Dim inc As Integer
Dim cs As New SqlConnection("Data Source=ConnectSQLEXPRESS;Initial Catalog=ForumCrawl;Integrated Security=True")
[Code].....
at System.IO.__Error.WinIOError(Int32errorCode, String maybeFullPath) at
System.IO.File.Delete(String path)
at
[code]....
The program first creates a file and use it but then I want that file to be deleted and I'm using the command as follows[code]...
View 1 Repliesi am using following code in my app but getting error the code is
Dim conn1 As SqlCeConnection = New SqlCeConnection("Data Source=|DataDirectory|exim.swf;Password=Pkyadav123;Persist Security Info=True")
conn1.Open()
[Code]....
while deleting foto it showing the error like"The process cannot access the file because it is being used by another process."actually while am clicking on the data grid.. the photo showing on a picture box"how can i delete the fotoam using the code
If File.Exists(strPhotoPath) Then
File.Delete(strPhotoPath)
End If
In my app i have to copy and then delete image files from memory cards, the problem comes when some of the card inadvertantly have the "Lock" switch engaged turning them to read only.
When trying to delete these files i want to log the failure to delete but not show any UI messages until a time of my choosing.
Here is some sample code i am having trouble with.
Sub Main()
Try
System.IO.File.Delete("K:BYZTCSQ_0050.JPG")
[Code]...
This works fine when debuging i.e. it tries to delete the file and if not the error is caught and i can proccess it as nessecary, but when i build and run the app i get an error message telling me that the file cannot be deleted.
To test this code you will need a drive that can be physically set to read only (USB memory key, SD card) and try to delete a file on it while debuging and after a build.
Why would the same code run differently and how can i stop the excess error messages?
I am trying to delete a row if the program finds a duplicate entry.
View 3 RepliesI am getting the attached error while updating or deleting the records. [code]...
View 9 RepliesI am concatinating a couple of text files and then deleting the individual files. (Not the output file)
The only problem is that I am getting a permission error "Exception from HRESULT: 0x800A0046 (CTL_E_PERMISSIONDENIED)" when I try to delete the files.
I can delete the files using the code below if I do not concatinate the files but as soon as I do I cannot delete them.
To concatinate:
Public Sub MeltText()
Dim SW As New IO.StreamWriter(OutPutFile)
Dim Files As String() = IO.Directory.GetFiles(StartDirectory, "*.txt")
Dim File As String
SW.WriteLine("Sw
I have a basic Table and I can add and save data, but when I try to delete, I het this error:Quote:Update requires a valid DeleteCommand when passed DataRow collection with deleted rows.
Public Class Form6
Private Sub ConverterBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ConverterBindingNavigatorSaveItem.Click
[code]......
I am having problem deleting my data on click event Private Sub btnDel_Click.
Here is my code:
Dim inc As Integer
Dim cs As New SqlConnection("Data Source=ConnectSQLEXPRESS;Initial Catalog=ForumCrawl;Integrated Security=True")
Dim dbSource As String
Dim da As SqlDataAdapter '("SELECT * FROM search_result", cs)
[Code] .....
The error I am getting isThere is no row at position 0.
In the following Sub I'm sending an Attachment when the email has been sent I would like to delete the attachment but I get an system.IO.IOException Error. the file I'm trying to delete is being used by another process. How can I detect if the process has finished.
Private Sub SendMail()
Try
Dim cfiAttach As Net.Mail.Attachment
Dim Attacmentfile As String = AttDir & fileName & ".pdf"
Dim SmtpServer As New SmtpClient()
[Code] ......
i've been all over the internet to solve this problem, but i've found no solution to my problem.my concept is this.Based on selected value within a combo box, the datagridview will populate with values from the database.
[Code]...
I am trying to delete a file(s) from a checked list box, when i click a button.
This is the code i have:
Dim item As IO.FileInfo
For Each item In CheckedListBox1.CheckedItems
Try
item.Delete()
Catch : End Try
Next item
But i get the error: Unable to cast object of type 'System.String' to type 'System.IO.FileInfo'.
I have been trying my hand at this for some days now and just cant get anything to work. Below is the code im currently using to delete a row from a database table, the problem when trying to build the project line 5 is giving this error about the value con" Value of type String cannot be converted to 'System.Data.OleDb.OleDbConnection' "
Dim con As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=Customers.mdb"
Dim cnn As New OleDb.OleDbConnection(con)
cnn.Open()
[CODE]...
I have also tried using this code below, but to no success. Im basically just looking for something rock soild that i can use to accomplish this task. Been stuck on this for quite a while now.
CustDetailsTableAdapter1.Connection.Open()
Me.CustDetailsTableAdapter1.Delete(txtDelCustN.Text, txtDelCustSname.Text, txtDelCustTel.Text, txtDelCustAddr.Text)
CustDetailsTableAdapter1.Connection.Close()
I got an error when I tried to save a deleted record in a table which I use to store username and password.
I can delete with no problems but the error message popped up when I clicked on the update icon
My login code is like this
Imports System.Data.SqlClient
Public Class Form1
Private Sub btnOK_Click(ByVal sender As System.Object, ByVal e As
[Code]....
I am trying to bind a textbox to a binding source (using the IDE DataBindings Editor) and it works fine except for one thing: if I delete the text I get the subject error. What I want to happen is the datarecord field be updated to a dbnull value -- how do I get that to happen?
View 4 RepliesAn unhandled exception of type 'System.IO.IOException' occurred in mscorlib.dll Additional information: The process cannot access the file "c:Fax524b2cfa00.tif" because it is being used by another process.
[Code]....
I have a basic Table and I can add and save data, but when I try to delete, I het this error:
[Code]....
I have a ftp chat of sorts and I want to make it so users can delete their own messages (Its all basically run off a .txt in the ftp). I just need a little help cause I don't know how to delete the off of a ftp. I
View 2 RepliesI have this code which should make my application start on startup or stop it from starting on startup depending on whether a checkbox is checked or not:
If MnuItemAutoStart.Checked = True Then
My.Settings.Startup = True
'This code all works fine, it creates the registry key like clockwork
Dim oReg As RegistryKey = Registry.LocalMachine
[code]....
I have tried running the program as administrator, using a different registry value, turning off all of my antivirus & firewalls and loads of other stuff. The strange thing is that I can delete the registry key in regedit, or any other program, it's just my program won't do it. It works on another program with exactly the same code (same startup code, different program).
Casting Table has MovieID , and ActorIDActor Table has ActorIDThis code deletes a row from the movies table(using a datagrid in vb.net), I need all the rows in the Casting table with the same MovieID to also be deleted.
Dim result As String
Dim i As Integer
i = MovieDataGridView.CurrentRow.Index
[code].....
I have a datagridview control that displays a list of expenses. I would like to code a button that will delete the record from the DGV and the DB table. Then I would like it to update so the DGV still shows up the updated DGV
View 3 Repliesi am trying to delete a node based on the userName input:This is the set up of my xml File:
[Code]...
I created a time clock program for a friends business and I added a place for them to use pictures for the employee. It uses the employee number to grab the photos from a folder and displays it (ex. employee #1 would like for 1.jpg). I want to let them change the picture without going to that folder, delete the old one, copy the new one and then rename it. I also let it have a default photo (theres 2, one for females and one for males, which are matched by there gender) just in case they haven't had a photo added yet. My trouble is, if I try to update the photo and delete the old photo, I get an error saying its in use by another process. My code goes like this, check to see if the employee has a photo, if it does, it will delete that photo (this is where I get the error), copy the new photo (already selected in previous code) and then sets the photo. how to release the photo from the project before I delete?
View 4 RepliesI have created a form called new users, I have added my data source, draged over the objects I want from the dataset onto the form and all is well appart from the fact that I cant delete records.
To add them I simply click the add button, put in my info and then click the little disk button to update the dataset.This does not work for the delete button though, instead I get the following error
UPDATE REQUIRES A VALID DELETE COMMAND WHEN PASSED DATA ROW COLLECTION WITH DELETED ROWS.
[Code]...
I have been looking for ages trying to find a way to delete a registry key in vb.net - This works: My.Computer.Registry.LocalMachine.DeleteSubKey
But my problem is that the key I want to delete has a different name on every computer. I.E. "KL Deployment Wrapper5444789417547544987"
I have played arround with: My.Computer.Registry.LocalMachine.GetSubKeyNames.Find
I need to delete some rows from csv file based on a column value. Here is my sample.csv file [code]In my vb.net winforom application, I have to read this file and need to delete the rows related to 06/06/10 date column values then write the remaining rows into new.csv file. So far my program works on reading whole data present in the file.[code]
View 2 Repliesi am creating a console app that will delete pictures from a directory every 30 minutes. Problem is that its being populated by files every minute or so. So if i go and delete files in that directory then it may cause an error trying to delete a file thats being created just then or opened.
I currently have this code to copy the files to another directory and then delete them from the source directory.Dim f() As String = Directory.GetFiles(sourceDir)
[Code]...
I'm building out a decommissioning application that will allow an individual to provide an computer name and the utility will go out and purge the computer record from various locations. I'm running into a problem when attempting to delete a computer account from Active Directory. I'm impersonating a service account that only has rights to "Delete All Child Objects" within a particular OU structure. The code below works if I run it with my domain admin account; however fails with an "Access Denied" when I run it with the impersonated service account. I have verified that the permissions are correct within AD as I can launch Active Directory Users and Computers using a "runas" and providing the service account credentials and I can delete computer objects perfectly fine.
Wondering if anyone has run into this before or has a different way to code this while still utilizing my current OU permissions. My gut tells me the "DeleteTree" method is doing more then just deleting the object.
Sub Main()
Dim strAsset As String = "computer9002"
Dim strADUsername As String = "serviceaccount@domain.com"
[Code]....
