This program will not compile. I will post the code and the errors I am recieving.I cannot for the life of me figure this out. The code on my "Hello World" program used the same PrintForm1 code and had no issues.I will supply my whole program and the error messages.[code]
Error Message:[code]......
Error1'PrintForm1' is not a member of 'VBMailOrder.VBMailOrderForm'
I created a stored procedure in the Northwind Database using VS Server Explorer. So now when I try to use the Stored Procedure I get the error Error1 'GetCustomersInfo' is not a member of 'WindowsApplication1.NorthwindDataSet'. GetCustomersInfo is the name of the stored Procedure. This code works when I get the info from a table called Customers:
Dim ABindingSource As New BindingSource
With ABindingSource
.DataSource = ANorthwindDataSet
.DataMember = "Customers"
[code]....
Then I get the error. SO I guess I need to get the Stored Procedure into the DataSet somehow but I don't know how to do that.
Dim instance As Graphics
Dim blackPen As New Pen(Color.Black, 3)
Dim point1 As New Point(100, 100)
Dim point2 As New Point(500, 100)
e.Graphics.DrawLine(blackPen, point1, point2)
Error1'Graphics' is not a member of 'System.EventArgs'.
Error1'KeyChar' is not a member of 'System.Windows.Forms.KeyEventArgs'.
Private Sub gradeTextBox_KeyDown(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles gradeTextBox.KeyDown
Select Case e.KeyChar
Case "0" To "9", vbBack, vbCr 'only allows 0-9 in the textbox
e.Handled = False
Case "." 'also allows a decimal point
[Code]...
A program cant be exited thu Alt+F4
[Code]...
Edit2: I want it to be in the form so that the form cant be closed unless they press button with Close() command or task manager ends the process
how do I overcome it? I have created a class and compiled into .dll This code
[Code]...
In Visual Studio 2008, if I do this:
[Code]....
Does anyone here know how to get the above to work WITHOUT warnings being generated?
In the following code i get a warning at line 59:Warning 1: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.and.. At line 78 I get this Warning:
Warning 2 Property 'SelectedCustomer' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used.
The program compiles and runs well, but i cant' undesrtand the reason for these warnings. Any Idea ?
1: Public Class Form1
2:
3: 'Form level members
4: Private objCustomers As New ArrayList
[code]....
I am getting the below error while migrating from VB6 to VB.Net:Error 1 'PrintForm1' is not a member of 'System.Windows.Forms.Form'. in the below code: Public Sub PrintScreen(ByRef frm As System.Windows.Forms.Form, ByRef FormHeight As Short) 'UPGRADE_ISSUE: PrintForm Component might require to be declared. frm.PrintForm1.Print(frm, owerPacks.Printing.PrintForm.PrintOption.CompatibleModeClientAreaOnly)End Sub The error is related to the 'System.Windows.Forms.Form' not containing the 'PrintForm1' as its member. In the project, I am sending different forms, with PrintForm Component, to a particular form using the above subroutine. According to the upgrade msg we have to declare the PrintForm1 Component in the subroutine. How can we change this code to get the desired effects?
View 6 RepliesCannot appear to be able to get this function to not have the above error.Private Function GetIncidentActions(ByVal FromAgentID As Integer, ByVal ToAgentID As Integer, ByVal incidentAction As Integer, ByVal ActionDate As Date) As String
[Code]...
Using PrintForm1 to print out a text file and the all the text is highlighted. What is causing this to happen?
View 1 RepliesWhen using PrintForm1 to print out a text file the printed text comes out highlighted. How to fix this problem?
View 10 Repliesim building a diary kind of thing. but when it needs variables one of the variables apperently doesnt exist, even though its right in front of my face so my error is----Error1'ioLines' is not declared. It may be inaccessible due to its protection level.
and heres my code:
Imports System.IO
Public Class Diary
Private Sub TableLayoutPanel1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs)
[code]....
if it matters i do have the full path, i just got rid of it for privacy reasons.And this is not my code, im just playing around, and dont intend to publish it.
I'm "cloning" objects in my code. For instance: objClone = objOriginal My question is: Does the assignment operator in VB.NET 1.1 do a member-by-member copy of the objOriginal to objClone or does objClone simply point as a reference to memory referenced by objOriginal?
View 3 RepliesI am trying to create a program with vb.net. I am getting the following error in the form1.designer.vb and so I am not able to run the program. Its urgent. Error1Value of type 'String' cannot be converted to 'System.Windows.Forms.TextBox'.C:\Documents and Settings\Srivathsan\Local Settings\Application Data\Temporary Projects\Cyber Cloud\Form1.Designer.vb49119Cyber Cloud And it says that the error is with this line?
View 3 Repliesi changed a class variable to shared so i can access it in all instances of the class, but it caused an error. what is causing this, and how can i fix it?
Private
Shared img As Bitmap
Me
.img = bgImage
I have 2 tables Table A & Table B Table A has the table values that I want to be populated in a datagridview control.The challenge is that column 1 in table A contains an ID(foreign key) to a name field that is a located in table B. I need the datagrid to have the first column be a combobox that displays the names(from Table B) that are already in table A via the ID's, but reference the populating values from Table B. So that when you bring down the combobox you would be choosing from Table B data but populating table A with the ID and you would see a name there instead of an ID.[code] How do I populate my DS dataset with Table B? And how can I create a link to these two tables using a bound datagridview control?
View 1 RepliesI am using Visual Basic 2010 and whenever I try to build a project, I get this error message.
Error 1 Unable to open file 'C:UsersAlexanderDocumentsVisual Studio [code]...
I get this error if I follow these steps: Change property Y of an object (an associated entity property)
Attempt to submit changes At this point the value of Y and the value of X (the underlying key) are not in agreement -- LINQ to SQL apparently doesn't synchronize these until GetChangeSet is called.An expected error occurs due to some business logic or database level constraint during the update operation.At this point the value of Y is in agreement with X because GetChangeSet was called.Change the value of Y to Nothing (aka null).Call GetChangeSet.
The error occurs on the last step because the value of X and the original value of X (returned by GetOriginalEntityState) are different, and the new value does not agree with Y? Is that why? Is this a bug in LINQ to SQL. Must be because I don't see the same behavior if I change Y to another (non-null) value instead during step 5. What's the right way around this? I can see a few ways:
Discard the DataContext when an error occurs and leave the UI as-is. I don't like this because then optimistic cocurrency change conflicts cannot be detected. The new context doesn't have the original values in it that were populated at the same time the UI was populated, so if the UI has any stale values in it, they will cause data in the database to revert.Refresh the datacontext (OverwriteCurrent) and leave the UI as-is. I don't like this for the same reason as #1.Refresh the datacontext (OverwriteCurrent) and re-populate the UI. I don't like this because then the error message just presented to the user does not show the user the error they made and allow them to correct it. It also discards all the other changes the user may have made.When the error occurs, explicitly retrieve the key for Y that corresponds to the original value of X and reset Y, then call GetChangeSet to re-synchronize X (X is read-only or private so I can't reset it directly). This seems to work, but seems like a hack, and may require lots of code for other similar errors.
I know I have done this before and as I remember it should be really easy. But for some strange reason I can't do it now and I am about to jump off the building.I will make it simple:Two tables, one is just a list of products and their code.The other table: "details" has a field named product. I want to store only the code there.In the second table's entry form, I am putting a combobox. This combo box should display the list of products, their names, but depending on which one is selected, the code is what is passed to the table "details". Currently If I set the display member to product and the value member to code it still pases the product to the binded data source.
View 3 RepliesI have a database that holds information about a particular job. One of those things is a customerID. CustomerID links to another table containing customer details. I have a combo box attached to a custom object that holds customerID as the valuemember and CustomerName as the displaymember.The JobDetails holds the customerID info. How do I set the default selection in the combobox based on the ValueMember of the combo box?
View 2 RepliesI actually already made up some pages in .NET environment,and i'm using VB.NET as my back-end.I have 2 files of A.ascx and B.ascx and each of them have the A.ascx.vb and B.ascx.vb files altogether.But here's the interesting part.I use 'isEqual' variable inside one of the method I typed in.And if I use it inside one of the vb file then, I could not use it into another vb file.Thus, Once I used that 'isEqual' inside of these 2 vb (files), I will got the error appeared as from one of the vb file;'isEqual' is not declared. It may be inaccessible due to its protection level.
My code is actually this one;
Protected Sub bindTable()
'add somemore for searching with dropdown list
Dim sSql As String = "SELECT *, C.companyname FROM quotationmst Q"
Dim sColumn As String = Nothing
[code]....
I get this error at the second dot of the IP address specified in my connection string.
Error1Comma, ')', or a valid expression continuation expected.
The code is as follows:
Option Strict Off
Option Explicit On
Imports System.Data
Imports System.Data.SqlClient
[code].....
Error1 Too many arguments to 'Public ReadOnly Default Property Chars(index As Integer) As Char'.K:\VB\Chap06\SumOddEven Solution\SumOddEven Project\Main Form.vb2645SumOddEven Project
Private Sub calcButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles calcButton.Click
Const prompt As String = "please enter even and odd numbers click cancel to end"
Const Title As String = "odd & even Number"
[code]....
I am started with the media center SDK, and have a problem with a simple example i get this error here:
Error1 Unable to find type 'MyObject'.C:UsersHTPCDocumentsVisual Studio 2008ProjectsTDCMusicTDCMusicMarkupDefault.mcml621TDCMusic
in this MCML file:
<Mcml xmlns="http://schemas.microsoft.com/2006/mcml"
xmlns:a="assembly://TDCMusic/TDCMusic"
xmlns:me="Me">
[code]....
I am trying to use the right function in VS 2008. I am simply trying to get the right 5 characters of a string.
VendorID = Right(cboVendors.Text, 5)
I am getting an error when I type that:
Error1'Public ReadOnly Property Right() As Integer' has no parameters and its return type cannot be indexed.
in VB.NET you implement an interface like this...
Sub SomeInterfaceMember()
Implements ISomeInterface.SomeInterfaceMember
End Sub
while in C# you do it explicitly like this (which can only be called via the interface)...
void ISomeInterface.SomeInterfaceMember(){}
or more simply, implicitly like this...void SomeInterfaceMember(){} // Note the name matches the interface member However, regarding VB, I can also do this...
Sub SomeRandomMemberName()
Implements ISomeInterface.SomeInterfaceMember
End Sub
In other words, the method that handles the implementation can have a completely different name than the interface's member name.I'm just wondering if there's something similar to this in C#. (Yes, I know I can simply do an explicit interface, then access it via another 'wrapper' member with a different name that simply delegates to it, but in VB.NET?
I went to load an app I was working on before my system died a few days back and I loaded up VB Express 2010 .Net, opened my project and saw this error ...
Error1Unable to find manifest signing certificate in the certificate store.HexHelperProject
If this is related to the Security Certificates stored by XP, then I'm in trouble as they are GONE. Must I start a new project and rebuild this whole app?
Public Class Form1
Imports System.Math
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load[code].....
For some reason, when i try to start the program im getting the following errors: Error1'Imports' statements must precede any declarations.C:Vb10sbschap05My Framework MathMy Framework MathForm1.vb25My Framework Math
Error2'Sqrt' is not declared. It may be inaccessible due to its protection level.C:Vb10sbschap05My Framework MathMy Framework MathForm1.vb1018My Framework Math
Im using Visual Basic Express 2010.This is from a tutorial in Microsoft Visual Basic 2010 Step by Step
Error1 The "GenerateResource" task failed unexpectedly.
System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.Build.Tasks.ProcessResourceFiles.Run(TaskLoggingHelper log, ITaskItem[] assemblyFilesList, ArrayList inputs, ArrayList outputs, Boolean sourcePath, String language, String namespacename, String resourcesNamespace, String filename,
String classname, Boolean publicClass)
[code].....