Exception Has Been Thrown By Target Of Invocation
Feb 27, 2009
What is the meaning of this error message?
"Exception has been thrown by the target of an invocation"
Instead of words, here is my code's logic :
while loop
run BGworker01
run BGworker02
...
run BGworker09
application.doEvents
thread.sleep(10)
end while
All the bgWorkers do the same thing (sending some data, only to different locations). When I run this loop with only 1 Background-Worker, it's all fine, but when I add the other bgWorkers i get the mentioned error at the "application.doEvents" part of the loop. I think it also points to another place (highlighted in green) inside one of the bgworker's code :
Dim FileStreamToSend As FileStream = New FileStream(fileToSend, FileMode.Open)
I thought it might be a problem that all bgWorkers are trying to read from the same file together, but when I tried using different file for each bgWorker, the problem persisted.
View 4 Replies
ADVERTISEMENT
Jan 15, 2012
I'm working on an application that contains a "BackgroundWorker", the "BackgroundWorker" worked fine but after I started to change some stuff it gives me an error ("Exception has been thrown by the target of an invocation.")... I used a breakpoint to see where it happens, the exception gets thrown at the "End Sub" line of the BackgroundWorker.I then deleted all the code inside of it and ran it again.I still get the error.
View 12 Replies
May 28, 2010
I want to use mozilla control in my application.. But when i use Webbrowsercontrol i just use
webbrowser.navigate("http://www.google.com")
but this commant is not working with mozilla control ant when we try to navigate to any web address it gives following exception.
Exception has been thrown by the target of an invocation.
View 1 Replies
Jan 21, 2011
I know this is a relatively common error but I am working in an application that allows custom reports to be written using vb.net or C# for scripting. Error handling is very poor and I am not knowledgable enough to add my own (if it is even possible).
My code simply retrieves a value that is stored in a textbox on the report formatted as LastName, FirstName and truncates all characters after the comma. This value LastName is placed in a new textbox on the report. Here is my code:
Sub Detail1_Format
Dim lastNameFirstName As String = ""
Dim lastName As String = ""
[Code]....
The error happens when I use lastNameCommaIndex to set the number of characters in my substring. If I replace it with a number the report is published properly.
View 1 Replies
Jun 21, 2010
Currently I m working in backgroundworker .but suddenly it begins to throw an exception
Exception has been thrown by the target of an invocation. source:mscorlib
stack trace :at System.RuntimeMethodHandle._InvokeMethodFas
View 10 Replies
May 21, 2010
I have a winform where I have some controls like TabPane, Label, ....When I launch my application without localization, it works fine. When I put localizable parameter True, I have this error :
TargetInvocationException was unhandled
Exception has been thrown by the target of an invocation.And when I debug my application, I follow the execution, program begins executing InitiliazeComponent(). I press F11 to continue the debug, program executes the TabIndex event of my TabPane and on the first instruction it crashes.My environment is VS2008, Framework 3.5. I store my project on a network hardisk (I test on local and it doesn't work too)
View 2 Replies
Oct 1, 2009
It errors often (not in a system damaging way) but enough that it bothers me.
Code
Public Shared Sub Fire(ByVal thisEvent As [Delegate], _
ByVal ParamArray args() As Object)
[code]....
Common Error
User Message: Async event fire error.
Error Type: System.Reflection.TargetInvocationException
Error Message: Exception has been thrown by the target of an invocation.
[code]....
View 1 Replies
Nov 24, 2009
I have a vb6 app, the error from event view is Faulting application vb6.exe, version 6.0.81.76, stamp 3592011f, faulting module vba6.dll, version 6.0.0.8169, stamp 358b0c74, debug? 0, fault address 0x0001982e. For more information, see Help and Support Center at [URL] And a message box pop out. Exception has been thrown by the target of an invocation. The code is
[Code]...
View 1 Replies
Feb 27, 2009
"Exception has been thrown by the target of an invocation"Instead of words, here is my code's logic :
while loop
run BGworker01
run BGworker02
run BGworker09
application.doEvents
thread.sleep(10)
end while
[Code]...
View 14 Replies
Jan 28, 2010
When a delegate method throws an unhandled exception, that exception is usually trapped at the level of invocation (eg. Delegate.Invoke()) - you get a System.Reflection.TargetInvocationException...
However, when debugging classes utilizing a lot of threading/invoation, it would be helpful to be able trap the exception in the target method i.e. the faulty code, and since Microsofts BackgroundWorker (exceptions thrown in DoWork()) is able to do it, why can't I???
View 2 Replies
Mar 21, 2011
When I click the VS 2010 icon to open it I get a popup box error "Exception has been thrown by the target of an invocation". I then need to right click the icon, click "Run as.." change "Current user" to "The Following user" then enter in my windows credentials and it opens fine. This is happening suddenly (Windows XP) and I don't know why. It wasn't happening before and I haven't started logging in with a different user or anything.
View 3 Replies
Jan 13, 2009
I am creating a programming that is sending info for one pc to another over RF. The desktop show create a xml file. It writes some of the info but not all. I receive a Target Invocation Exception Error. I realize I need to slow down the incoming Data. I want to use a timer to slow it down.
View 4 Replies
Aug 22, 2009
what is this error " Exception has been thrown by the target of an invocation."the code is :
Private Sub Button10_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button10.Click Button10.Enabled = False
Label19.Text = "Checking for updates .... "
WebClient1.DownloadFileAsync(New Uri("http://www.fileden.com/files/2009/8/20/2549735/virson1.txt"), "virson1.txt")
End Sub
[Code]...
View 2 Replies
May 13, 2012
This may be a debugger issue, but here goes:I have this piece of code:
Private Function Connect() As Boolean
Try
sessionBegun = False[code].....
My intention is to 'convert' the low level exception into something more meaningful, so I throw an exception of my own creation. I want this to bubble up to a place where I can handle it.However what is happening is my debugger breaks and tells me that an exception of type "QuickBooksConnectionException" was thrown.I know that, I just threw it, why are you catching it? From what I've read, this ought to work, and there doesn't appear to be an analogous Java throws keyword, so perhaps it is my debugger.
View 3 Replies
May 16, 2009
I am using a background worker to process some login information. However, the background worker has to stop and wait for 2 events to happen. Once these have finished the background worker can complete its job. They are callback that will call the Set() method of the AutoResetEvent.
So I am using AutoResetEvent to set when these 2 events have finished. However, I seemed to be getting this error message
"Exception has been thrown by the target of an invocation." and Inner exception
"Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index". The exception usually fires when the registration success leaves scope.
The code for the background worker.
' Waiting for 'Account in use' and 'Register success or failure'
Private loginWaitEvents() As AutoResetEvent = { New AutoResetEvent(False), New AutoResetEvent(False) }
[Code].....
View 2 Replies
Feb 26, 2009
The Exception is not thrown in the following code in Visual Basic 2005, if sqlserver 2005 is down.[code]...
View 12 Replies
Aug 5, 2010
I have a log table where i need to insert the query which causes errors in the code. I have a common function "WritetoLog".[code]My Question is from the ex how do i take the query which causes error. eg. If the insert command is giving exception i should get like this SQL Query causes error : Query + ex.Message..SQL Query causes error : Insert into temp("1",'Anitha','TeamLeader',) + Incorrect syntax near ')'
View 2 Replies
Mar 22, 2012
I'm working on a status monitoring program for my company and we need to be able to know if a process on a remote machine is hanging due to not responding (that I can do) or if it's thrown an unhandled exception. I've tried a number of things from checking the CPU usage of the process to checking if the process has gone idle. Nothing has really been reliable. Is there anyway to do this? All the programs we'll be monitoring are running on either .NET 3.5 or 4.0.
View 4 Replies
Aug 15, 2011
I am writing a program that saves quotes for writers to an xml file. Well I save my data to the xml file, but when I go to load the document I get this exception thrown at runtime.
System.Xml.Xsl.XslLoadException was unhandled
LineNumber=2
LinePosition=1
[Code].....
View 1 Replies
May 17, 2012
I'm working on a project for school in which a dll is loaded.
The dll that is loaded is a bridge between my program and the Twincat System Manager which forms the bridge between the computer and a PLC via the local network.
I need to read Variables trough this whole chain from the plc to my program.
This is the way I do this:
Public Function adsReadReal(ByVal Variabelenaam As String) As Single
Dim ds = New TwinCAT.Ads.AdsStream(4 * 8) ' new data stream
Dim br = New System.IO.BinaryReader(ds) 'new binary
[Code]....
View 1 Replies
Jul 29, 2009
I am writing a windows service that needs to be running 24/7. It is a pretty simple service that monitors a directory where files are dropped into and processes those files. I need to restart the service if an unhandled exception is thrown.
Is there a way for a service to restart itself in the event of an unhandled exception?
View 6 Replies
Aug 24, 2011
In the following subroutine, will the StreamReader be closed properly when the exception is thrown? Or do I have do something myself to ensure this?
[Code]...
View 2 Replies
Nov 17, 2010
Last night my project worked just fine. I left my system up overnight and came in this morning - my project is still on the screen, so there was no update/reboot or any of that. I added 6 lines of code, and suddenly get Build Failed. I removed those lines of code, and still get Build Failed. I restarted Visual Studio, and still get Build Failed. No Exception is ever thrown and no cause for a failed build is ever given. Output is set to Diagnostic, and it indicates nothing wrong or out of the ordinary - every task completes successfully right up to the end when it says Build Failed.
View 6 Replies
Jan 21, 2011
How can I catch an exception thrown by a control event?I have a control that throws an exception in one of its events and I need to catch it but I don't know how.Consider for example that the text box control throws an exception in its click event. How can I catch such exception?
View 3 Replies
Oct 17, 2011
I want to catch the exceptions thrown by the login() function in JIRA's SOAP API. The function login throws 2 exceptions. RemoteAuthenticationException if the user provided an invalid username or password and RemoteException if there was some problem preventing the operation from working. Currently I'm using this code to catch the exception
[Code]...
View 1 Replies
Aug 20, 2010
listA is list of integerdtListB is DataTableI'm checking that if StudentId of ListA doesn't exist in dtListB, then add it to the dtListB.
Dim stidListA, stIdListB As Integer
For Each la In listA
stidListA = la.StudentId
[code].....
View 2 Replies
Aug 9, 2010
I want to force a calling method to implement exception handling.
Java forces a calling method to implement exception handling where it calls another method that thorws an exception.
Does VB.Net have the same mechanism?
View 1 Replies
Feb 18, 2010
lets just go straight to the code:
View 3 Replies
Jun 9, 2010
I am trying to deserialize an object represented as an array of bytes - but I get a Out of Memory Exception. Whats causing this?
View 13 Replies
Sep 8, 2011
Weird problem, it only happens for one of my clients, and it happens on all 3 of their computers. Their computers are Windows XP.My form has a Windows Media Player control on it, to play a video from the internet. When the form loads, I get an exception "External component has thrown an exception". It happens in the form's designer, in the InitializeComponent procedure, at this line:CType(Me.wmpVideo, System.ComponentModel.ISupportInitialize).EndInit()
It works great on 100 other clients computers, running XP, Vista, or 7, and this is the first person to have this issue. If I take the Windows media player out of the form, it works fine.BTW, those computers have Windows Media Player installed, I already checked.
View 2 Replies
