When I try to call System.IO.File.Encrypt() on an existing file, it throws a generic IOException, and the message is "Parameter is incorrect". System.IO.File.Encrypt("C:ProjectStorageDirectoryfile.txt")
The current user the process is running under has full control to the "StorageDirectory" folder. Is there something I'm missing permissions-wise?
Here is my problem: I developed one application in VB.Net in VS 2008 Express Edition on MS Vista. I published the application and created the installation setup. Now when I install this application on any Vista machine, it runs without any problems, but if I install it on an XP machine, the installation is clean, but when I launch the application, it ends abruptly without any warnings/error just after the splash screen.
Then to investigate further what I did was that I copied the source project from my VS 2008 Express Edition on Vista to an XP machine having full (VS 2008 Team System) version , and when I try to compile it there (XP/VS2008 Full), I get one error in one of the forms resx file. Incidently this is the same form that gets loaded after the splash screen. So I see there is some correlation between my application ending just after the splash screen and failing to compile the main form of the application. The error that I get reads like: "Invalid resx file. The parameter is incorrect Line 1374, position 5."
The parameter to a sub is being passed a value like 501/500, of coarse this value should be converted to 1.002. Unfortunately, the actual value being passed to the parameter is 1.0.
[Code]...
So I have this weird issue where I set a SqlParameter.DbType field = to a SqlDbType.Decimal, but instead it sets it to a SqlDbType.DateTime. I'm going to include 2 screen shots from the debugger one line after the set statement. As you can see when I hover over (just after the execution of that line), it set the param.DbType to the wrong value. I can only assume that the param.DbType has code that incorrectly changing the type. How can param.DbType become a SqlDbType.DateTime when the varable I'm setting it to is a SqlDbType.Decimal? I'm targeting the .Net Framework 3.5.
View 5 Repliesi tried to pass parameter to crystal report viewer. but it show The Parameter is incorrect.
Dim rpt As New ReportDocument
rpt.FileName = My.Application.Info.DirectoryPath & "MAuditList.rpt"
Dim paramDV As New ParameterDiscreteValue()
[code].....
The programs runs fine for about 10 seconds but then I get this error message: ArgumentException was unhandled. Message: The parameter is incorrect. Here's my
[Code]...
I have a service that runs under local system that I need to have execute an external .exe using alternate credentials. Using the code I have posted here, I get the error "Error-:-The parameter is incorrect" and the target site is "Boolean tartWithCreateProcess(System.Diagnostics.ProcessStartInfo)"Here is the code:
Try
Dim AuditProcess As New Process
Dim p As System.Security.SecureString = New System.Security.SecureString
[code]....
System.InvalidOperationException was unhandled.
An Error occurred creating the Form. The error is: The Parameter is incorrect
Incorrect type for parameter Source:MSRDO.rdoColumn Number:40060 Description:Incorrect type for parameter. I have encounter the above problem by editing column(Comment Dropdown Box) . I only have sql DB and don't have VB code.:(( How should I do for this problem?
View 1 Repliesi have a problem writing to the registry. This is my code:
[Code]...
I am trying to convert one of my unix text files to a dos text file. I am using the following command:
Shell(string.format("unix2dos {0}", sFileCompletePath))
I've already added the unix2dos command in my environment path on the server.But when I execute the above mentioned command I get a FileNotFound exception even when the file is located on the disk.
I'm doing a uni assignment and my application has to go to a specific folder and locate a file for data.The folder has 300+ files in it with a specific format for the naming of the files ie. the program goes to the folder looking for one specific file that has been derived from a different function and user input in the form.The program works fine when the file that it is searching for is there, but I keep getting a FileNotFoundException whenever the file that it's looking for is not there.I don't want the application to throw an exception every time the file doesn't exist because the program needs to return back to the loop to see if the next file is there or not.And so the loop continues until it's found all data and loaded it all into an array.How can I do a check of the folder to search for the file, and if it's not there, go to the next step without throwing an exception?
View 2 RepliesI'm having trouble writing the code to encrypt a file->networkstream->Decrypt the file.. I've tried several ways, but I keep failing....
View 1 RepliesI would like to know if it is possible to be able to encrypt a file and have my application be able to decrypt it and ammed the file as necessary. and then when the program exits it will encrypt the file back up.
View 4 RepliesI'm just getting started with Visual Basic .NET and I'm currently stuck on the following problem: how can I encrypt/decrypt a file with asymmetric encryption?
Essentially, I'm trying to figure out how I can write the following pseudocode in VB
[code]...
Has anyone used these methods? I tried File.Encrypt on a text file, and I did not get an exception, however the Encrypt method did not work (the file was unchanged afterwards).
View 3 RepliesI am attempting to use the VB.Net FileSystemWatcher class to watch a folder for the creation of Excel files.I do get a response when a .xls file is created in the folder, but am having a problem with the below code:
[Code]...
I need some help on saving/reading xml from/to dataset. I would like to make that complete file is encrypted and not only some elements inside or part of file.Currently this is not working in any way at all.[code]
View 14 RepliesSo I have a connection string which is read from a basic text file. This string contains a password. Is there anyway to encrypt this text file so that anyone can't just open it up and read it. The program will still be able to read it.
View 5 RepliesIs it possible to encrypt a file/folder in vb.net?
View 3 RepliesI ended up getting this properly working, as far as encrypting a file goes:How to encrypt and decrypt a file by using Visual Basic .NET or Visual Basic 2005 However, the catch is I have to change the name of the output file. What I was hoping to do is overwrite the original with the encrypted file, but when I tried that on a large file, it ended up only getting about 8 bytes of it.
Does anybody have any suggestions or recommendations? The overall idea is that I want to keep a file encrypted until it needs to be unencrypted for use by a program, but I'm not sure if there are better tools out there or if there's a better way of accomplishing this.
Question 2: I would really, really like to encrypt an entire folder, which I'm guessing would be faster than file by file, but when I try I keep getting access denied errors, even with DOS Cipher. Is there a way to do this with a key?
I made a program that encrypts data and puts it on a txt file. There are two parts of information that need to be "linked" to the other. Say its Person 1, then Person 1 gender, they need to be placed together. Each encrypted piece of seperated by a ";". I have it read the file and place the information on a Rich Text Box. How can I read all the encrypted info and stop at ";" then place that into a variable then read the next bit? I did this a while back but I used StreamReader/StreamWrite and can't remember how I did it. Right now it reads through the open file dialog and writes it to the Text Box with this command writetext.LoadFile(sFilePath, RichTextBoxStreamType.PlainText)
View 4 RepliesHow to encrypt or set a password for my AVI file with visual studio 2008?
View 1 RepliesI have a page that has a few text boxes on it and are filled based upon a persons information. Like Name, telephone number, address etc
The data is stored in an Access DB.
I want to add a check box and have a label beside it that if it's checked it shows a hyperlink to a pdf file, if its not checked the link disappears, so toggle between the two.
Here's the check box I have so far, which isn't much:
<br><input type=checkbox name="Password" value="<%=oRs("Password")%>" size=40> Check to show PDF File: <a href="<%=oRs("Password")%>"><%=oRs("Password")%></a><br><br>
I need this hyperlink/ string to be encrypted based upon the persons name, so each person has its own pdf file and no one can just guess anothers pdf file and have access to it....
The pdf file will be stored in a virtual directory within the site.
I don't know Vb or asp, and I'm doing this all in notepad ++
I need to encrypt vbs file using a cryptographic algorithm. I read about converting it into vbe file, but is there any other way to do it?
View 1 RepliesI have the files in a listview control, with checkboxes. I would like it to encrypt all files ending with .rc4, that are listed in the listview. But keep the original of file extension
E.g : file.txt --> file_txt.rc4
How can I get it to encrypt multiple items. I already tried and still can't write in...
Here my code
Private Sub BtnEncrypt_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnEncrypt.Click
Dim ByteConverter As Encoding = Encoding.UTF8
Dim Key As Byte() = ByteConverter.GetBytes(TextBox2.Text)
If ListView1.Items.Count <> 0 Then
[Code] .....
I have been successful in making an anti-hack program that uses a list from the local computer, this is at the moment a text file that can easily be modified, so my question is.Is there a way to replace this .txt file with a more secure format, one that cannot be decrypted (or is very hard to decrypt) without changing all my code?
the only thing i have to use the txt file for is adding the contained items to a listbox. Also, it would be possible for be to use SQL as i am using a dedicated server for the automatic update, so can use it as a remote library for the app the connect to.
i am looking to decrypt my HEX code file for an ATTiny chip and programming it using the AVRDude command line interface. Problem being, i do not want the user to be able to see what the HEX file is at any given time.Can the VB.net Cryptography crypt the HEX file before i put it onto the server and then decrypt it after the program downloads it from the server and runs it through the program without seeing the decrypted HEX file?Obviously the HEX file can not stay encrypted while being programmed to the ATTiny chip so how can i go about it so that i can create the original HEX file to be programmed within the program without having to worry about it writing a temporary file to the hard drive and then deleting it afterwards? (Because they could close the program after it does that temp file and they would be able to navigate and open it and see the code)
View 3 Repliesi am looking to decrypt my HEX code file for an ATTiny chip and programming it using the AVRDude command line interface. Problem being, i do not want the user to be able to see what the HEX file is at any given time.
Can the VB.net Cryptography crypt the HEX file before i put it onto the server and then decrypt it after the program downloads it from the server and runs it through the program without seeing the decrypted HEX file?
Obviously the HEX file can not stay encrypted while being programmed to the ATTiny chip so how can i go about it so that i can create the original HEX file to be programmed within the program without having to worry about it writing a temporary file to the hard drive and then deleting it afterwards? (Because they could close the program after it does that temp file and they would be able to navigate and open it and see the code)
i am looking to decrypt my HEX code file for an ATTiny chip and programming it using the AVRDude command line interface. Problem being, i do not want the user to be able to see what the HEX file is at any given time.
Can the VB.net Cryptography crypt the HEX file before i put it onto the server and then decrypt it after the program downloads it from the server and runs it through the program without seeing the decrypted HEX file?
Obviously the HEX file can not stay encrypted while being programmed to the ATTiny chip so how can i go about it so that i can create the original HEX file to be programmed within the program without having to worry about it writing a temporary file to the hard drive and then deleting it afterwards? (Because they could close the program after it does that temp file and they would be able to navigate and open it and see the code)