I have a program that I copy a file from one server to another. This has been working well if the servers are on the same domain.I now need to copy a file to a server on a different domain. If I were to do this manually it would prompt me for my username and password.
I don't see any way to put a username and password with doing an IO.File.Copy. Is there a better way to do this?IO.File.Copy(strSource, strDest)
I have a question. I'm deploying my VB app that performs some task VIA SCCM. The application is run with the NTAuthoritySystem account.
I would like to copy a log file to a server all domain users/computer can right to this folder. I'm trying to get a log copied to the server but since it's running as the system account it can't authenticate to the share to save the log file on XP machines.
Can somebody show me example code of how to save a file as a different user when running the program with the system account . Would this be secure to use a domain account to impersonate and save the file?
i need to copy file from domain to workgroup and one domain to another domain and workgroup to domain
how to copy file with authentication
I have a file that is being generated automatically on a server in a Windows domain, say, called, "prod" and I will need to have VB.NET to transmit this file to another server in another Windows domain, say, "QA", where QA and Prod have different credentials altogether and I have to authenticate that credential every time I opened up the destination folder.Therefore, I guess the regular filecopy method would not work?
View 2 RepliesI've got an app which uses a background worker to copy files. It works fine but some files are quite large and it "appears" as though the app isn't doing anything. Is there an alternative to the File.Copy method of copying files so I can report on the progress of individual file copies, like the percentage complete?
View 19 RepliesBefore I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
[Code]...
Im trying to file copy a certain file in our server and it says QuoteLogon failure: unknown user name or bad password. this is my code fileCopy (OpenFileDialog1.FileName, "\\SERVER\System\PictureDataBase\" & txtSurname.Text & ".jpg")
View 2 RepliesI am writing a program that needs to be able to copy a directory from C:Folder to a folder inside My Documents.I am aware of the My.Computer.FileSystem.SpecialDirectories.MyDocuments which places the directory in the root of My Documents. I however, want to copy the said folder to 'My DocumentExampleFolderFolder1'
View 1 RepliesWhat I tried was using My.Computer.Network.DownloadFile(), and created a shared folder in the other computer to do downloading stuff.But, in fact I didn't know how to fill the path to the other computer, the error was: "...path not supported..."
How about this:
ServerName1 = cmbServerName1.Text.Trim()
database = cmbDataBase1.Text
[code]......
Does My.Computer.Network.DownloadFile work with FTP? When I attempt to use it, I get the exception: "The remote server returned an error: (500) Syntax error, command unrecognized."
Here's the code I'm using:
Dim UpdateAddress As String = "ftp://xxx.xxx.xxx.xxx" & lbDownload.Items(X).ToString
My.Computer.Network.DownloadFile(UpdateAddress, BasicPath & lbDownload.Items(X).ToString, "", "", True, 10000, False, FileIO.UICancelOption.ThrowException)
The FTP server is IIS6.
I'm trying to upload a file to a remote server by using vbscript
below is a code :
Dim fso, f, myFile
Set fso = CreateObject("Scripting.FileSystemObject")
myFile =$URL
[code]....
the problem is with this code i can copy the file only in the same PC but it didn't work when i try with different machin i mean from client to server?
In our project logs files are stored in clients local only . So during any production issues we have to be waiting till they provide us the log file. What is the best way to copy the log file from clients local machine to some common path in one of our servers .
View 2 RepliesI am trying to create an application, which in first phase will read the content of an XML file, count the products, and copy the content of the XML to a sql server database TEMP table, which i have already created. I have already created the code to read the content of the XML file and view it in a datagrid view. But i dont know how i should copy the content to the database i have created....
The code i wrote till now:
Imports System
Imports System.Xml
Public Class FrmXMLRead
[code]....
I need to copy each product (code, category, subcategory, part_no, titlos, timi, availability, anakykl, lianiki) to the TEMP table of ABC databaseHow should i proceed to copy the data to a database ABC and table TEMP?
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know:
1. how to open a new file
2. how to specify the record length
3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I want to know how to connect to a remote system having some shared folder.(ex, \myservermysharedfolder).Actually, I was supposed to copy a particular file which is available in a shared location of a system. To copy that file, first i need to connect to that system with an user id and password.I know copying of file (), But not getting clear idea on how to connect to the shared folder. I have tried with System.Management class, but no use..
View 2 RepliesI am working on a VB Console Application that takes an Autocad drawing type DWG and converts it to a PDF using a shell command that calls a third party application. In this case, acmecadconverter.exe from www.dwgtool.com. Then the PDF that is created needs a unique watermark, so I call a second application for that called pdftk.exe from www.accesspdf.com/pdftk/.
Everything works as intended, except when I try file names that contain spaces. The file system object does not tolerate spaces in the drawing file name. For instance, the following command gives me a system.io.filenotfoundexception...
My.Computer.FileSystem.RenameFile("Test Flowchart1.dwg", "Test~Flowchart1.dwg")
It's the same problem for all of my File System commands. Either file not found or invalid arguments.
The complete script I'm using is here:
Code:
Sub Main()
Dim arrArgs() As String = Command.Split(","), _
i As Integer, folderPath As String, myPart As String, _
[Code].....
I'm currently developing an editor for an AFL management sim.I want to be able to load three or four multidimensional arrays to the program, then save them to the same file. I tried the tutorial on here but got completely muddled up. Why can't it be easy like in VB6 When it was like 10 lines of code tops!
View 5 RepliesI am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
View 8 RepliesI have a program that can save to a .txt file.The issue is I need it to be done in a tab delimited way.Basically:
TextHere<Tab>TextHere<Tab>TextHere<NextLine>
TextHere<Tab>TextHere<Tab>TextHere<NextLine>
I have this so far, but all it does is put the TextBox1.Text next to TextBox2.Text
Code:
SaveFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
Dim FileWriter As StreamWriter
Dim results As DialogResult
[code]....
Our program will start with the help of a FileSystemWatcher object. How can we check or the file is total copied, for example the file is 100 Mbyte it take a time it's ready for use. Idea:
Do While True
Try
N = testForUse(BigFile)
If N = 1 Then Exit Do
[CODE]...
I have a program that uses IO.File.Copy to copy files from point a to point b. Its slow, which is fine because there rather large files. I was wondering if there is way to get an estimate time to copy a particular file(s).
Example: File a will take 1 hour to copy, File B will take 30 minutes to copy. Estimate Total Time: 1 hour 30 minutes.
I want to be able to able to read the dimensions of a TIF image without loading the entire file.
PS Using Visual Basic 2008 on Vista64.
Error is coming Registry Access is not allowed.While Opening a Key.
Code:
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
NewDelete("HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun", "Sonia")
End Sub
[CODE]...
I've had a bit of a look around the net and on the forums but I've yet to find an answer to my question. I've got Visual Basic 2008 Express and I'm trying to write some registry entries, I can write strings fine just using
[Code]...
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
trying to find a decent answer for my question; I do have a utf8 file which I (down)load, manipulate and wanting to save back again.The result always is that the file I produce is not in utf8 format;
Dim fs2 As New FileStream("c: est.dat", FileMode.Create, FileAccess.Write, FileShare.None)
Dim w As New BinaryWriter(fs2, Encoding.UTF8)
[code].....
trying to input a text file that's tab delimited that looks something like this.
2.2 5.6
3.7 9
1.2 9.1
[code].....
i am working on an application called logonscreenchangerxp i made my program and when i run it on xp virtualmachine i get errors the program is made using vb 2008 and using .net framework 2.0 i am not able to get full permissions to modify boot.ini file and a regisrty value and to delete a file
View 5 RepliesCurrently, I am try to get the email addresses that have been saved or stored by the user of the computer. This isn't the emails that the user has sent or received, or the contacts he/she has in his address book. Just simply the email accounts that have been accessed from the computer.I know that there are some locations stored in the registry that have the email account. The email addresses that are used on the current computer. I just can't seem to find them on my computer.I am not sure if the registry is the only place to find it or if it stored on the web browser such as internet explorer or google chrome.
View 1 RepliesI am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
In this key:
Code:
HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{4D36E978-E325-11CE-BFC1-08002BE10318}
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
I am using VB.net 2008 and Windows XP.