I have a macro that creates shapes in my documents. The following macro will delete all of them. How do I modify it so if they say NO it will go through the document and find each occurance of the shape and ask if you want to delete this one? [code]
View 2 RepliesIs there anything like shapes control of VB 6.0, in Vb.Net? I need to draw lines etc. at design time. But I could not find any shapes control in the toolbox.
View 2 RepliesI have a bunch of object variables which are all initialised in their declarations such that:
Private _myObject As New ThisObject("SomeString")
where ThisObject is one of a number of object types, but all are initialised using a string.
I would like to use the Visual Studio Find/Replace dialog box to search for "As New" then replace everything from "As New" to the first set of speech marks with some text such that:
EDIT
My original example could be solved using other methods. This example is more representative of the actual problem:
Private _myObjectA As New ThisObjectA("SomeString")
Private _myObjectLongName As New ThisObjectLongName("SomeString")
[Code]....
The user enters a numerical value in textbox1 and click search. This searches for this value using PackageIO (any other options you guys think would be faster would be great) and will return how many instances of that value have been found. There is a second textbox and button that will only be enabled if 1 instance is found. If more than one instance is found, an error message pops up. I'm not too experienced with PackageIO. Here is what I have so far. The program crashes every single time. I'm positive there is something wrong with either part of it or the whole thing.[code]...
View 5 RepliesI'm trying to do a 'find/replace' sort of thing, but for some reason the Replace function isn't working. It says it cannot be indexed because it has no default property. How do I do the replace correctly?ere's my
Dim aString As String
aString = Replace(DirectCast(Form1.SplitContainer1.ActiveControl, RichTextBox).Text, Me.TextBox1.Text, Me.TextBox2.Text)
I need it to act as a "find next"...meaning that
1. When I click the find button,
2. In the main form, it should find the text
3. And when I click it again
4. It should find the same text again ..if it's in the main form
How to write the loop. This is what I have so far:
Private Sub xFindButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles xFindButton.Click
Dim startPos As Integer
startPos = xTxtSourceTextBox.Text.IndexOf(Me.xFindTextBox.Text) ', type)
If startPos = 0 Then
Me.xTxtSourceTextBox.Focus()
[Code] .....
How to create a find and replace dialog using microsoft visual basic 2008 express edition
View 1 RepliesI have a Ms-word document in a particular Location. I need to open the document find a particular sentence and replace my sentence using vb.net....
View 1 RepliesImports Word = Microsoft.Office.Interop.Word
Dim str_FullName = "Microsoft Corporation"
Dim oWordApp As New Word.Application
oWordApp.Visible = true
[Code]...
I'm not sure why the code won't work... It opens the document without problems, it just won't find and replace the text. No, I did NOT typo the text it's supposed to be finding. I copied and pasted it straight out of the word document.
Im working on a Winforms application that reads an XML file containing html templates and generates some html to send to another application.Each template will have about 25 values to replace.I thought about using the String.Replace method for this but wanted to get some ideas from the people here.
View 10 RepliesI have some text files that contain
<img width="100" or
<img width="1400" or....
How could i replace all above with the following, since the image width is not static?
<img width="200"
I want to program a find and replace for text files
View 1 RepliesIn VS 2008 Pro, my Find and Replace function just went belly up. I mean dead. I have a document open, I click Edit -> Quick Find or Quick Replace, and the Visual Studio window flashes (the control bar at the top goes gray as if the IDE was deselected) but the Find/Replace window never appears.
I've poked at my settings, disabled the addin I've been working on, and looked all over the various toolstrips in Visual Studio - no sign whatsoever of the Find/Replace Window.
I was hoping I can make a program which can replace a hex code of a file if it match the code I'm searching in another file. For example, I need to find hex code "1F 7C" in file.ojs and then replace all the "1F 7C" with "E0 03" in test.bmp.
View 7 RepliesI have code that works great for 1 richtextbox, heres the problem i have 2 richtextboxes I need to some how search either 1 textbox or the other depending on whether that particular richtextbox is active i.e. cursor in it. [code]...
View 6 Replieshave a list of 84000 words , and have some articles in these articles i want to replace first occurrence of each word i have in listbox e.g
For Each item In ListBox1.Items
Dim mytext As String = "My some text this text is very long text and i want to replace this"
If ListBox1.Items.Contains(mytext) Then
[code]....
but it used to replace the whole mytext i want to replace words in mytext and also it hang the system and very very slow?
how to use the find and replace feature? Sort of like what notepad uses. But, it replaced certain characters with a set character, not a changable one.[code...]
View 13 RepliesI have the following code which I am using to track a series of key presses as a string. When I enter the string up until the last charachter all is good.The idea is that I have my string ('--START). When I type this in any program, it will automatically be replaced with my specified string. The problem is it always leaves the last charachter.
Typing '--START Leaves me with [my replaced string]T
Typing '--END Leaves me with [my replaced string]D.
In my sendstring routine, if I place "Threading.Thread.Sleep(500)" right at the top of the routine, then it works. Obviosuly I can't have a half second delay. Is there any way to handle keypresses? Or somehow delete it otherwise?
vb.net
Dim Key As String = ""
If wParam = WM_KEYDOWN Or wParam = WM_SYSKEYDOWN Then
'Translate virtual key into character/expression
Select Case lParam.vkCode
[code]....
I loop through find & replace expecting it to put one string from an array each time it finds "/" ( marker). Not doing as I expected.
Set myRange = Selection.Range
For i = 1 To wdCount
With myRange.Find
[Code]....
I code in VB using VS2010..I have a richtextbox with variously coloured text.I use richtextbox.find to locate and highlight a word.I use richtextbox. replace to replace it with another word..The word is replaced - but all the colours disappear!
View 3 RepliesVB.net VS 2008
I need to develop a small application which can do a batch find and replace on all xml files within a folder. Example:
<cardHolderName>
<firstName>Geraldine</firstName>
<middleName>
[Code].....
I want to replace ALL <firstName) tags to John and all <lastName> tags to Smith to protect sensitive date. In addition, there will be other tags such as address, ss number and phoneNumber.
NOTE: There may be multiple instances of <firstName> within the file. 1000 xml files with all replacing names, address etc. with the same fixed name such as John Smith These will be used for testing and to prevent sensitive data from being leaked
There is no doubt that I can do this the long and dirty way. (I am working on).
Find & replace by error is docked such that I cant see the code while I am using "Find".
I could not undock the window despite various attempts.
I have an issue with finding specific text within a string and then replacing it with " ", which is just a blank entry.[code]So now my issue is to search the ABCTEST text and delete text such as "Tier Market" from it. Then pass it to a new string perhaps ABCTEST_NEW..I know i might have to use a for loop to search out the keywords, but all the examples i have had a look at, are very broad.
View 1 RepliesLet's say I have an object that contains a Word property and a Sentence property. The sentence must use the word, and I want to replace the word in that sentence with a link using a public function (say, GetLinkedSentence). The catch is maybe the sentence uses a plural form of the word and maybe the "word" itself is actually a phrase, or is even hyphenated. There's no length limit to the word either. How do I find and replace this word (in ASP.NET, preferably VB) with a link [word])?
View 2 RepliesI have 2 groups of text in my text file[code]...
View 3 RepliesI have a XML file. Inside the XML file where ever I find the string as ("C:Results est1_01") I need to replace it with ("B:final est1_01") and save it.
View 1 RepliesI have a tab delimited .txt file, I am reading successfully. Reading first line and split into array. Through the loop I am checking the duplicate column name.
Now I want, if duplicated word found, how can I replace the second one. Suppose my file contains
Cell Site Cell ID Cell ID Site Detail
1 A 1 A1 ABC
2 B 2 B2 XYZ
I want to replace second Cell ID to Cell ID_2.
Cell Site Cell ID Cell ID_2 Site Detail
1 A 1 A1 ABC
2 B 2 B2 XYZ
I am making a program for work, i have it partly coded, unfortunately i don't have a wifi connection for my laptop right now which makes it hard to add my code here. What i am trying to do is have the user pull in a text file from anywhere on the computer using a open file box that pops up, i got that part, to make sure that is working i have a textbox that reads the data of that text file, it gets pulled in fine using a stream reader. Now what i need to do is search the text file for certain values, and depending on the selected item in the listbox which is on another form, change that value in the text file, im guessing i will need to use a stream writer, and ive seen examples used based on the file location(C:....) but in my case im not sure how to do it.
View 15 RepliesI am using Visual Basic 2008 Express Edition, my goal is to read an entire .txt file that works as a template and replace all ocurances of a word with a new one and save this new modified text in a new .txt when you press a command button.
View 2 RepliesI am trying to replace the vb source code in our application by using a streamreader and a loop.
the reason for this is, we've upgraded to a later version of 3rd party grid controls and the properties of the controls changed, so we have to change the code 13 XXX times.[code]...