Font Size / Type And Size In Paper RDLC + ReportViewver + VB2005

Apr 15, 2009

Whats the font size real meaning? since when i use Arial font size 10 in the report its gonna take different space than the textbox im using (Both using exactly same font type/size/unit) its kinda if i set 10 milimiters to the font size why would the i and M for example have so diferent size.

i wish it was like in the Notepad where all the letters take the same space. what i need its to give a certain texbox(in the report) with auto grow to have always the same lines of height but its not posible to calculate it from vb b4 being inputed to the report.

ADVERTISEMENT

IDE :: Font Dynamically Change Size To Be As Large As Possible Without Overflowing The Fixed Label Size

May 3, 2009

I have a label which appears full screen on a projector (VGA 2). In this label I will be sending strings. Some one liner's, some wrapped paragraphs. Some multi-line with carrage returns. My goal is to have the font dynamically change size to be as large as possible without overflowing the fixed label size.

View 10 Replies View Related

Can Auto-size Font Size Follow By Length Of String

Jul 4, 2010

I had set a print format to print some word in a Text box, when I input the text in text box is an normal size from system,but I want it print out to printer follow the Rectangle size that is was set to print out on paper.actuary i want it can auto size the font size follow by the length of string.

View 1 Replies View Related

Changing Font Size & Bold - Get Property 'Size' Is Read Only?

Feb 27, 2009

I'm new to VB in Visual Studio 2008 and am just trying out some simple test.I just want to change the Font & Boldness of some text but get the following errorProperty 'Size' is Read onlyI have been browsing the forums and it seems that changing the font size etc isn't as simple as

TextBox.Font.Size = 12
TextBox.Font.Bold = True

Is this true, and if so what do I need to do

View 5 Replies View Related

Change Font Size Based On Form Size?

Jun 23, 2011

Okay here's what I'm trying to do. I want to change the font size of a label based on the size of the form.If the form size is 0 through let's say 500 I want the label size to be 50. How can I write this?

View 5 Replies View Related

Convert Font Size To Control Size?

Aug 10, 2010

I'm writing a couple of custom controls in VB.Net 3.5, in VS2008, and would like to resize the font size based on the height of the control, and vice-versa. Is there any way of converting a font of say 38.25pts into a me.height, or the other way round?

I realise the font width will change dependent on the font used (which isn't an issue for my purposes), but as far as I know, the font height is usually consistent Accessibility/Large font settings won't be an issue with this application.

View 8 Replies View Related

Win FontDPI - Make My Application To Use A Predefine Font Type And Size?

Jun 3, 2010

Is there any way to make my application to use a predefine font type and size so if in Windows the fonts are set to be large it will not effect my application fonts in the controls?

View 2 Replies View Related

Set Paper Size A8?

Jun 11, 2011

In crystal report in VB.net how can i set the paper size A8?

View 4 Replies View Related

Change Controls Size And Location Based On The Change Of Font Size?

Jun 14, 2010

I have the Context Menu Options like ( Small Font , Large Font ) based on the selection I want to change the size of the Font in the Controls,Control's Size & location(x,y,height,width). The  resize of the controls should not affect the look and feel of the forms.

View 5 Replies View Related

How To Set Paper Size To Legal

Jun 25, 2009

i can't figure out how to set the paper size to legal!. [code]

View 6 Replies View Related

Printing - How To Set Paper Size

Sep 2, 2009

I'm learning about printing and have made good progress but there is still one thing I can't understand. I can set the paper size using "papersize" but should I use "paperkind" - is so, how do I use it? When I want to use the standard papersizes(A4, A5 etc) what method is best?

View 2 Replies View Related

Resize Paper Size To A5?

Jan 23, 2012

I am working with VB 2010, I need to print content that is in Forms, but to doit the way I requested, I need to print on A5 size, or the need to make PaperSize = A5...

View 2 Replies View Related

ITextSharp Custom Paper Size

Mar 22, 2010

I'm using iTextsharp library to create PDF files. I can declare for A4 Landscape paper like this:[code]I'm wondering how I can set Height of pdfTable or A4 Height manually. Because there's a lot more margin left at the bottom, and I need to put some text at that margin. Right now, I put a line of text at the bottom, the line's got pushed to the new page.How can I override the height of A4 paper provied by iTextsharp? How can I create a custom size paper, say Width = 29cm, Height = 22cm?

View 2 Replies View Related

Print Using Custom Paper Size?

Aug 12, 2007

printing document using custom paper sizes, i created a new paper size thru code and try to use the same paper size for printing, in preview it shows exactly [ giving output in same pape size ], but while printing the paper size is resetting to A4 / letter.How can i solve this ... i am using vb.dot net 2005.i read somewhere that it is possible thru Winspooler API, but i dont know how to use that.

View 1 Replies View Related

VS 2008 Size Of A4 Paper In Pixels?

Apr 3, 2009

I need to know the size of A4 paper in pixels, does anyone know this, I want to be able to print at 100,100 on a piece of paper, and it be in the exact same position as in my form.

View 5 Replies View Related

IDE :: Increase Tabpage Header Font Size And Header Size

Dec 16, 2009

how to make bigger tabpage page headers without changing tabpage or its contents font size. i just need to change tabpage header to make it look bigger with different font.

View 1 Replies View Related

Change Printer Default Paper Size?

Aug 10, 2011

What i want to do is simple but at the same time complicated. I have multiple .PDF file and i want to print them all. Thing is, all the .PDF are in 8,5 X 11 paper size. The printer is also on this paper size by default and i want to print them in a different size. I want to change the default printer size programatically so it prints in the right format. I need to change this in the program because i need to print in a few different paper size. 

here is some code
 
Dim Process1 As New Process
Dim starter As New ProcessStartInfo("C:Program FilesAdobeReader 10.0ReaderAcroRd32.exe", "/t " + path + filename + " " + printername + "")

[Code].....

View 4 Replies View Related

Manually Setting The Paper Size Programmatically?

Mar 21, 2010

i want custom paper size can i declare in height and width of the paper.

View 1 Replies View Related

Microsoft Fax - Printing Incorrect Paper Size

Nov 18, 2011

I have written a program in VB that sends faxes to my customers. When I test it, the fax machine prints the output on legal paper and I have no idea why. I have checked everything that I can find and I don't see anything in the API to set the paper size. I am setting the body to a PDF file. When I print the PDF file locally, it prints just fine. I have tried other files, output from other programs (i.e. word) and the end result is always the same.

View 2 Replies View Related

Paper Size In Print Preview Dialog

Feb 18, 2012

Is it possible to set the paper size in print preview dialog? I attached the image of what I wanted to achieve.

View 1 Replies View Related

VS 2010 Changing Printer Paper Size?

May 16, 2012

I need to set the paper size on a printer to A4. I have tried several different ways to do this but keep getting errors. Currently trying some code I found on the net but I am getting errorsType 'PaperSize' is not defined&PaperKind' is not declaredI am using the following

Private Sub PrintDocument1_PrintPage(ByVal sender As Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
Dim ps As PaperSize

[code].....

View 2 Replies View Related

Cannot Change Font Size, Font Name And Color In Dhtml Editing Control?

Aug 25, 2010

I can't change change the font size or font name or color of the text in the DHTML Editing Control. I have 2 listbox controls FontNameList containing all of the installed fonts on my PC and FontSizeList containing some numbers to be used as fontsize and I use the execommand and build my App but the font did not change instead it grew bigger but when I tryed to change it back it stayed the same. The Code for that was:

Design.ExecCommand(5044, False, Font.Name)

View 8 Replies View Related

Excel 2007 - Code To Enlarge Font Size, Font Name And Do Page Setup In Ms.excell?

Jun 2, 2011

I am creating an excel report from vb.net. Now it works. But i realize that the apparent does not make sense. I just want enlarge some font size and change font name plus setting up the page to fit my receipt printer (Epson TM-T88IV).

View 1 Replies View Related

Enable Choose Paper Source By PDF Page Size?

Nov 8, 2011

I'm writing a console application in vb.net using which i'm trying to print pdf documents from a specific directory. I'm able to print the PDF files but my problem is that the PDF files vary in Page sizes and the printer fits them to the default page size which is set to letter.

My questions is, Is there a way to enable "Choose Paper Source by PDF page size" using vb.net for the printer settings.

View 2 Replies View Related

Print Fixed Paper Size Document Through Code?

Jun 10, 2011

I would like to take print on pre-printed stationery where I need to fixed up my data in very particular place. Also the paper size is 10 inch by width and 6 inch by height and it is continuous paper which need to be take print from dot matrix printer.

View 1 Replies View Related

Setting Custom Paper Size In Crystal Report

Aug 22, 2010

I need to print the bill and the paper size is 204 by 152 mm and its a continous paper. i did write the code as follows [code]i have done enough research but came with nothing thats why m posting here.I just need how to set custom paper size to crystal report.

View 7 Replies View Related

Create User Defined Paper Size To A Network Printer?

Sep 30, 2010

How can I create a user defined paper size to a network printer on Windows XP ?

View 12 Replies View Related

Custom Paper Size Printing In Dot Matrix Printer With Tear Off

Sep 10, 2007

I am facing a problem in printing document using custom paper sizes in dot matrix printer,i created a new paper size thru code and try to use the same paper size for printing, in preview it shows exactly [ giving output in same pape size ], but while printing the paper moves for A4/Letter and i cann't able to enable the Tear off Mode.i am using C# 2005.

View 2 Replies View Related

Print A Whole Webpage In A4 Size Paper On Button Click Event?

Jan 6, 2011

How to print a whole webpage in A4 Size Paper using asp.net / vb.net on button click event

View 5 Replies View Related

Print A Whole Webpage In A4 Size Paper Using Asp.net On Button Click Event?

Feb 4, 2011

How to print a whole webpage in A4 Size Paper using asp.net / vb.net on button click event ? I wanna print the Whole DIV tag and all the controls inside it ....

View 1 Replies View Related

Programmatically Setting Custom Paper Size For Crystal Report?

Nov 5, 2008

I have created custom paper Size "XPaperSize 15 x 12" in Printers - File - Sever Properties. In VB .net 2005 I am trying to set custom Paper Size for Crystal Report. My problem is when I run report from Vb .net, Crystal report viewer showing correct preview for custom paper size but when I give print command it's print default printer paper size e.g. Letter size.

Here's the code I'm using to print:
Dim ObjCrReport as new ReportDocument
ObjCrReport.SetDataSource(ObjPrintDataSet.Tables("PrintData"))
SetReportPageSize("XPaperSize 15 x 12", 1) ' call Procedure for setting Custom Paper Size
End Sub
[Code] .....

If I used "myAppPrintOptions.PaperSize = PaperSize.PaperLegal" then print preview & Printing coming correct. Why it's printing Letter Size where Crystal preview showing custom paper size preview? & How to set Crystal Report Printer Paper Size?

View 2 Replies View Related

Setting The Font Style And Font Size Of My Textbox

Feb 2, 2009

how will I set the font style and font size of my textbox in a programmatic way? Also, if possible, a code that displays the different font style on a combo box.

View 3 Replies View Related

Define User Defined Paper Size In Bar Code Zebra Printer?

May 1, 2009

How to define user defined paper size in bar code zebra printer using dot net

View 5 Replies View Related

Change Font Size Without Creating A New Font?

May 28, 2009

Is it possible to change the size of a font in .net winforms without having to create a new Font with the new size?

View 3 Replies View Related

Structures - Fixed Size (Overall Size And Item Size)

Jun 8, 2011

Now all went well about from using the structure correctly. The working of the structure was perfect. How ever i missed Two important issues. The structure needed a fixed size of 10 items (9 in programming terms starting from 0) And also out of the 5 items allowed to be chosen as one of the member types for the structure a limit of 5 items of that particular type.

[Code]...

View 9 Replies View Related

Font Size In MM?

May 26, 2010

I have a strange problem which I am really struggling with, im making a type of CAD program which the user needs to specify a font size in mm.

Everything seems to work ok but when I get the bounding box of the font it reports it as being less than the font height specified.

[Code].....

View 6 Replies View Related

Change The Font Size Only

Mar 16, 2012

How do I change the font size of selected texts without touching the Font type (cmbFontName.Text)? I may highlight a lot of texts with different font types and I only wanted to change its font size. How do I do that? Here's my

[Code]....

View 9 Replies View Related

Font Size In Millimeters?

May 13, 2010

I am using to Drawstring method to draw text in a container panel, i have set the Graphics.Page unit to millimeters and now I would like to set the size that the text draws in millimeters.

View 2 Replies View Related

Getting Font Size Error

Dec 26, 2010

Private Sub FontToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles

[code]...

My application crashes as I change the font size! What is wrong? romp does return a number as text...All i want it to do is paste that next right next to the "fontsize="

View 1 Replies View Related

Set The Font Size Of A Textbox?

Jan 26, 2009

is there an easy way to set the font size of a textbox.

i tried this

textbox1.font.size=10

but it says that size is read only but there has to be a way to set it.

View 8 Replies View Related

C# - Convert The Font Size In Inch?

Mar 23, 2012

I need to convert between Drawing.Font.Size (float, ?) and WPF FontSize (double, WPF pixels).Finally, I decided to store in the database the fontSize in inch...How can I convert the GDI FontSize to inch and the WPF FontSize to inch?

sizeInInch = wpfFontSize / 96
sizeInInch = gdiFontSize / ?

Can I use something DPI independent? Maybe System.Windows.FontSizeConverter?I need to convert to something, that will allow me to switch multiple time between WPF and GDI without changing the "real value". Each division and following multiplication will accumulate errors...

FontSizeConverter does a ConvertTo, but I don't understand to use it:

myUniversalFontSize = (double)(myFontSizeConverter.ConvertFrom(
gdiFont.SizeInPoints.ToString() + "pt"))

will transform my gdiFont size in ...? WPF Pixels?How now should I convert back that value to GDI?

gdiFont.SizeInPoints = myUniversalFontSize / 96 * 72???

Can I use in the second example the myFontSizeConverter too?

View 2 Replies View Related

Change Font Size At Run Time?

Apr 29, 2009

I have a RTB control and I would like to change the Font Size. If I have already done some formatting on the RTB, after doing the following, all formatting is lost.

Code:Public fSize As Integer    Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged        Try            fSize =

[Code]....

I Think it is because I am making a New Font. How do I change the Font Size of the Selected Text?

View 4 Replies View Related

Change Label Font Size?

Dec 17, 2011

Create a font size increment application that displays Size in label and increases the font size of the label in intervals of 5 starting at size 10 and ending at size 50. [code]...

View 2 Replies View Related

Change Size Of Font When Too Long?

Apr 25, 2010

How can I automatically change the font size of the label when the length of text exceeds the maximum width of the label?

Also, how do I set when that should stop? I mean obviously it can't keep getting smaller forever, so what would you advise I do when the text gets to a really small size? Just stop text entry? How?

View 2 Replies View Related

Different Font Size When Setting A Point 10

Feb 10, 2010

When setting a point 10 font size in VB6:

[Code]....

The reported size is 10. Can someone explain the difference here? My hunch is that VB6 is using a .75 step because my system is configured at 96 DPI, and .NET is not using said step, or not reporting its usage, but I'm not sure.

View 2 Replies View Related

ADVERTISEMENT