I am trying to make a routine to handle closing a program with a confirmation dialog box. The problem I am having is I cannot get the confirmation to work right. [Code] If I run this nothing happens. The dialog box goes away but the program stays open. I have also tried options with e.cancel and my version of visual studio (2008) does not recognize that as a proper command.
View 9 RepliesI am trying to close my application and I have coded on the form closing, form closed events to call an exit form which asks the user for confirmation to exit or not. All works fine. When I press the X button on the winform things act different. On the main form where I press the X btn I store some user ID data that I use throughout the app. If I press cancel on the exit form that data is lost from the main form and cannot be used afterwards. So if the user pressed by mistake the X btn and then presses cancel on the exit form the application loses some stored data and many functions stop working.
View 12 RepliesWe were using the parent's FormClosing event handler to get user confirmation of the exit before continuing, but have just discovered that the child windows get closed before this is run. We only want a single confirmation message box, but I guess that would require the child windows to ask the parent to confirm.
View 1 RepliesI am trying to close my application and I have coded on the form closing, form closed events to call an exit form which asks the user for confirmation to exit or not. All works fine. When I press the X button on the winform things act different. On the main form where I press the X btn I store some user ID data that I use throughout the app. If I press cancel on the exit form that data is lost from the main form and cannot be used afterwards. So if the user pressed by mistake the X btn and then presses cancel on the exit form the application loses some stored data and many functions stop working.
View 4 RepliesI want to do something like when click on the close button, a message box will pop up and if yes, close it else remain in the same form. But the following coding seems only consider one side while the other side is ignored.
Style = MsgBoxStyle.DefaultButton2 Or MsgBoxStyle.Question Or MsgBoxStyle.YesNo
Check = MsgBox("Do you want to quit?", Style, "Exit confirmation")
If Check = MsgBoxResult.Yes Then
Application.Exit()
End If
I have a basic three form application. It doesn't seem to close after navigating through forms. If I were to open the application, and the main form is displayed. If I press the X button, the application closes fine(Goes from processes) If I were to open the application, and then navigate from the main form to another form using me.hide & form1.show, and press the red X on Form1, the application again, closes fine.
[Code]...
I Have a Windows Form -Personnel form After you finish entering data there is a save command button become visible.this Save Btn works properly with this Function.[code]
View 5 RepliesI have managed to create and code a file menu exit with the following code, however I just can't seem to find out how I am able to edit the red X in the top right hand side of the form next to the minimise and maximise buttons?
Private Sub ExitToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ExitToolStripMenuItem.Click
Dim close As String
close = MessageBox.Show("Are you sure you want to exit?", "Exit Log Book", MessageBoxButtons.YesNo, MessageBoxIcon.Question)
[Code]...
I have a form which checks on load if an host (ip) is available. If not it shows a messagebox and exits the application.
Here is when the problem occurs.
Now the messagebox shows just a short time, then the app exits automatically. But what I would like is, after a user hits the OK button the app exits.
Here is the code I use:
Private Sub SplashScreen1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Try
[code].....
I'm a newbee with VBnet , I use vbnet2005 I have a major form called FORM1, and when I click the bottons in it it shows another form for example-I have these some forms (printscreen):
FORM1 - major form
FORM2 - calculation form ( there are few forms like this)
FORM3 - result form
What I need is:When I open FORM2 and get results I push the botton SEND and then it should send the values into FORM3 I don't know if the public variable will be good here because they are not constant , I can get different results in FORM2 ,and these results should be writen in textboxes only after I push send bottom.
I hope it is clear , I don't know how to do it,if you can give me a code for this or detailed answer , I would be very glad.
I have a validating event for a txtbox called txtname. If the user tries to leave txtname for another txt box without entering their name a messagebox comes up giving an error. I have an exit button which will when clicked ask you if you really want to leave then you can choose yes or no. I can't seem to figure out how to allow the user to click the exit button while leaving the txtname blank so it would bypass the error message and only bring up the exit prompt. Here's what I have coded for the validating event and the exit event.
Private Sub txtName_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles txtName.Validating
If IsNumeric(txtName.Text) Then
[Code]....
on the form event: FormClosing I have this code that saves a treeview to xml, when it is saved it displays a message, but when I click the messagebox OK button, the messagebox keeps popping up and won't close that form.Here is the code I use:
Private Sub AddressBook_FormClosing(sender As System.Object, e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
'Build our List of custom objects from our TreeView's Nodes
[code]....
I am having trouble with some code I am writing to handle an Excel spreadsheet. The idea is that the dialog box is displayed which invites the user to select an Excel spreadsheet. Once they have done that, it is opened and a separate function checks to see whether Sheet1 exists returning Nothing if it is not found. The intention being the try/catch block picks it up and gracefully does nothing. The problem is that when the function returns nothing, the dialog box is still displayed and the sub doesn't seem to exit. [Code]
View 4 RepliesI'm developing a program using VB 2005.I've tried to use the following instructions to "kill" the application
Application.Exit()
Environment.Exit(0)
(not at the same time)
[code]....
I'm having a bit of a problem getting my application to close properly. Basically I have one main form from which all other forms open. If a user tries to close that main form, I want to bring up a MessageBox asking if they want to exit the application.However, when I try to do that it asks the question twice. It seems that the Application.Exit() is triggering the FormClosing event again for some reason, but I don't know of another way to exit the application. BTW, the main form isn't the startup form so I can't use the option to close when the startup form closes.
View 9 RepliesNow I have a sub to validate a bunch of textboxes and combo boxes.I previously used many IF statements to validate and pop up different messageboxes and Exit Sub in every IF statement.But I heard that too many Exits will decrease the efficiency and they were not recommended to use. Instead, nested IF is better because it will let the process naturally go to the end.Then I found out that if I use nested IF,it will be hard to read, since messageboxes are all separated from conditions.
View 2 RepliesHow do I exit from the recursive loop from the code below. I would like to notify the end-user to select a checkbox in a msgBox before I exit the loop.
[Code]....
My routine to check for updates is run as a separate process. Exiting the application is required to update, so a dialog asks the user, when an update is found, if they want to exit now. f they do, the code (from the update thread) calls Application.Exit().However, if the FormClosed event of any form that needs to be closed needs to access its controls, an invalid cross-thread operation is detected (which sounds pretty logical).
View 1 RepliesI have just done my program, just skeleton not completely, the final problem has not been solved up to this time.When I run my application, the Icon of its will be showed at TaskTray. I would like the icon is there when I exit fom of application and then If I double click on the Icon, the application will be showed.
View 5 RepliesHow can I create a confirmation popup box into my Windows Form project? I use SQL Server Compact and Visual Studio 2008 Pro.At the moment I have some buttons and operations that delete selected rows straight from my database.
What I want to do, is have those buttons continue with the coded operation if the user clicks "OK" on the confirmation box.The box should be like the MsgBox, but with two selections: "OK" and "CANCEL".
P.S. I have several places to include that confirmation operation.
Loading a form is the easiest thing to do. Unfortunately with the 2008 version, I keep running into new problems. Now, my forms will not load when I run and click the main form button, yet they used to work, so, I am therefore, seriously baffled. I'm hoping I just forgot to put in some code. So anyone who reads this post, please enter in the proper code for loading a form. such as for forms 1, 2, 3 and 4. 1 is the main form, and 2, 3, and 4 are the other forms. also if there is a loading procedure on the other forms, please note those two.[code]
View 1 RepliesI have a datagridview named dgvInventory. Okay when you have data inside your datagridview all you have to do is push the delete button on your keyboard and it automatically deletes the record. However, I want a popup box that says "Are you sure you want to delete this record?", and if yes is clicked then the item will be deleted, if not then the record stays the same.
View 1 RepliesBy default the ultraWinGrid pops up a delete confirmation box for any row deletions. How do I turn that feature off?
If i'm deleting in the code, it's no problem:
myUltraGrid.DeleteSelectedRows(False)
But I don't know how to apply that when the user presses the delete key.
I have a .NET4 web application using the Entity Framework
In one of my pages I have a gridview bound to an entity data source. Within the Gridview definition [code]...
I'm currently coding a button which will delete a record from a database if clicked. However, I want some sort of confirmation after they click it so there are no accidents. I was imagining a popup box that tells them they are about to delete this record with two buttons cancel and OK. If cancelled, nothing happens, but if OK is pressed, then the server would execute the delete as coded. How would I do this in asp/vb?
View 2 RepliesIn my projects (WPF) I use System.Windows.MessageBox to show the user a confirmation dialog for operations that are critical, such as a delete-operation.
My problem is that if I specify as button value MessageBoxButton.YesNo, the user cannot use the escape-key to cancel the operation. IMO this is one of the most annoying things, a program can do, showing a dialog without the possibility to cancel/close the dialog through the escape-key.
Other possibilities are MessageBoxButton.YesNoCancel, but IMO this is confusing because it shows three buttons for only two operations . Or one can use MessageBox.OKCancel, but this is IMO not clear enough. In my dialogs I want to ask the user if her really wants to execute the operation. And for this, a simple ok is not appropriate. A yes (I want) is much better than an ok (go on).
How do you handle this? Is it a non-topic or do you think as I do and have an own MessageBox-implementation or do you know a possibility to extend the System.Windows.MessageBox-class?
I have an attribute that I just added to my database to hold confirmation numbers. The only problem is they are all null so I am getting errors. Thus I need a method to generate random confirmation numbers (no duplicates). The column entries have a max size of varchar(20)
Solution:
randNum = Replace(Guid.NewGuid().ToString(), "-", "")
randNum = randNum.Substring(0, 19)
[code].....
I want to have a confirmation message box pop up when a user clicks the cancel button on a form. I believe this would be the correct javascript code:
function confirmation() {
var answer = confirm("Are you sure you want to cancel? Any information you have entered will be discarded.")
[CODE]...
But, I'm not sure how I can call the function with VB from my code behind page.
I am using jQuery confirmation box within my listView and the confirmation box displayed with the user clicks delete. The problem that I am faced with, is that when the user clicks OK it, the lvAlbums_ItemDeleting event is not fired.
Below is the .aspx code:
<link href="jQuery/jquery-ui.css" rel="stylesheet" type="text/css" />
<link href="jQuery/jquery-ui-1.7.2.custom.css" rel="stylesheet" type="text/css" />
<script src="https://www.google.com/jsapi?key=" type="text/javascript"></script>
[Code].....
I have spent days looking at different jQuery confirmation box examples but this is the best I can do. Ideally I would want to be use [URL] within gridviews, dataViews and ListViews but can't find examples which exactly provide steps to follow.
I am developing a website where I need to send confirmation link to the user's e-mail account when he/she signs-up.
When user clicks this link then a field userEnable in database changes from "false" to "true".
How do I send a confirmation e-mail to a user when user clicks on the signup button.
When user clicks on this confirmation link then how would the field UserEnable change from "false" to "true"
I am using asp.net 4.0 with VB.NET as the language and SQL Server 2008 for my database.