Ok simply my code doesnt want to output the correct number. I'm working on the project euler probems to expand my knowledge in VB.net and the current question I am working on is asking to work with triangle numbers. while researching I found that a triangle number can be calculated by using the formula:
[Code]....
Is it possible to return more than one value from a function? Like two integers, or an integer and a boolean, or any other data type combination. I understand I could use a sub and set these values in a variable but I was wondering if I could avoid declaring more variables by using a function.
View 28 RepliesI am working on a project I would like to use a function in a class I created to return multiple values in order to populate a listbox. I wanted to use a do until loop to achieve this. I will just post a simplified example of what I am doing :
Public Function Listboxfiller
Dim astring As String = "This is a string"
Dim Counter as integer = 0
Do until Counter = 5
return astring
Counter += 1
Loop
Then on the form I would do something like :
lstListbox.Items.Add(Myclass.Listboxfiller)
What happens right now is that the listbox only gets the first value, when I ran through in debug mode I found the loop only runs once, even though it should go multiple times.
I have an active directory search function:
Function GetAdInfo(ByVal ADDN As String, ByVal ADCommonName As String, ByVal ADGivenName As String, ByVal ADStaffNum As String, ByVal ADEmail As String, ByVal ADDescription As String, ByVal ADTelephone As String, ByVal ADOffice As String, ByVal ADEmployeeID As String) As
[code].....
show me how to return multiple values from a function? I have my function in a seperate file within App_Code and here it is:Public Function GetQuoteStatus(ByVal QuoteID As String) As String
Dim quoteStatus As String
Dim con As New SqlConnection
Dim cmd As New SqlCommand
Try
con.ConnectionString = ConfigurationManager.AppSettings("quotingSystemConnectionString")
con.Open()
[Code]...
However this is all good and well for one returned value but what If I wanted to return multiple values.How do I access them?
I am pulling a date value from my database:
Dim qfresho = From p In dbConfig.Configs _
Where p.Description = "FROD" _
Select p.dateValue
Dim qfreshc = From p In dbConfig.Configs _
Where p.Description = "FRCD" _
Select p.dateValue
Then comparing these date values to the current date:
[Code] .....
But for some reason its always returning the Else condition - even though the values in the database should make the query true. I'm guessing for some reason its not pulling the results as a date?
I have a filtered bindingsource bound to a datagrid. The datagrid fills and displays the data correctly based on the filter criteria.
The problem comes when I try to access the data directly from the program. It returns data, but only as if the filter wasn't there at all. [code]...
Here's the issue I'm having:
I have a filtered bindingsource bound to a datagrid. The datagrid fills and displays the data correctly based on the filter criteria.
The problem comes when I try to access the data directly from the program. It returns data, but only as if the filter wasn't there at all.
The count function returns the proper number of records.
[Code]....
My brain may just be fried since it's the end of the semester, but my teacher kicked this back to fix and resubmit...she said that I am "returning the name of your function rather than your variable name".
Here is my code for all 3 forms.
code:
These are forms to calculate the cost of getting a cell phone package.
Is it correct to correct properties values on the fly? for example: (note the .ToLower)
Public Property X() As String
Get
Return _x.ToLower
End Get
[code]....
returning a function value? I have a simple function that returns an integer. This function works fine when executed in SQL Developer but, when called from my apps, it always returns 2 regardless of anything. I have checked it over and over again, I cant seems to find where I am going wrong.
[Code]...
what changes I need to make to the code so that when no value for intPosition is found the textbox txtRoomNumber remains blank? At the moment a value is being entered into the textbox when no value for intPosition is found.
Code:
Private Sub btnFindRoom_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnFindRoom.Click
Dim strRoomType As String
Dim intRoomNumber As Integer
[code].....
My VB code uses a timer with a slider, and uses AddSeconds. I am trying to use the slider with a min value of 0 and max value of 600, and set up ticks every 30 seconds between 0 and 600.At a beginner level coding VB,I am not sure how to set some of the correct values in the slider's property box.Min, Max and Value, I am guessing are 0, 600 and 0 (sets the slider thumb starting positionat the far left). But I am not sure what other values, like tick and small and large change, etc. need to be set and set to what value? I've read online, but so far cannot find how to configure this.
View 10 RepliesJust come across the following snippet:
Public Function Checked() As Boolean
Return applyChange 'this is a string!
End Function
Whats going on here? How can a function with return type Boolean actually return a string? I'm assuming theres some implicit conversion going on here, which I'd rather not have.
I am hopeing someone can help me here with a recursive function I have that is not returning either true or false as I would have espected it to. The function loops through a Active Directory group for its members and then calls itself if it encounters any groups within the membership in order to gets its members as well. I am trying to return either true or false based on if any errors were encountered but not haveing any luck at all. It appears to just hang and never return back to the primary calling sub that starts the recursive function. Below is my code I am using:
[Code]...
If an object is created inside a function and the function returns that type of oject how is the memory handled.
Example:
Public Function GetEmployee(employeeid as integer) as employee
Dim oEmployee as new employee
oEmployee.FirstName="Bob"
[code]....
Does the variable that receive the object still a pointer to the memory location that was used inside the function?What about when you do a oEmployee2=oEmployee.Is oEmployee2 just a pointer? And any changes to oEmployee will now affect the other. Just trying to understand it from a memory perspective and how that scope works?
Function returning different datatype
View 4 RepliesI have stored procedure which I will execute its result and pass it into a Dataset and return it but at the same time I have a Output parameter in my stored procedure which I also want to return, how can I return both the dataset and the integer output value with my function, or is there a more 'appropriate way' to handle such situation?[code]
View 5 RepliesI need to return an array but the array size will change from one call of the function to another so I need away to storing the returned array. The function is as below, and as you can see the returned array will be of different sizes:
[Code]...
Im overiding getRolesForUser() I have 2 columns i return from the query IAdapter.GetRolesByUserName(userName) returns two columns (roleID, formID) How can I return them and access the two columns data? 2 dimensional array?
[Code]....
is it possible for a VB.net function with a return type of integer to return null ?
View 3 RepliesFunction test(ByVal res As Integer) As Integer
res = 2
Return res
[code].....
I'm attempting to create a function that will get the User Accounts from the registry. I then need to loop through those users and commit specific actions on each one.Here's my function:
VB .NET
ublic Function UserAccounts() As String
Dim userskey As RegistryKey = Registry.LocalMachine.OpenSubKey("SOFTWAREMicrosoftWindows
[code].....
i have this class that i'm calling from a telerik report. when debugging asp.net application the report shows the right results but when i deploy to IIS it just return the first row and not the SUM of the salary variable.
Imports System
Imports System.Collections
Imports System.ComponentModel
Imports System.Data
[code]....
VB.NET Code:
Module Module1
Sub Main()
Dim x, y As Single
x = 0 + (512 / 2 - 407) / 256 * 192 * -1
[code].....
returns 0: 0
i have this code:
...
Dim Labels() As String
Dim Count As Integer
Count = 0
[code].....
I'm making this game where there is an enemy that goes to the center of the form and grabs an object and brings it back to the side. I made a new class called enemy that makes the enemy. in the class there is a sub called start which the enemy goes to the center and brings the object back. when the enemy comes back with the object i want the integer lives to subtract 1 from it. so i put the
If Not Rect.IntersectsWith(Form1.ClientRectangle) Then
Form1.Lives -= 1
End If
where Rect is the enemy's bounds. when ever rect is not intersecting with the forms bounds (which means when its off screen) lives should subtract 1, but it doesnt.
Cannot gen. the correct wave values?
View 2 RepliesThe code underneath works when I use WM_MOUSEMOVE but not when I use WM_NCMOUSEMOVE. Is WM_NCMOUSEMOVE not supported anymore?I use the correct values for the constants too.Protected Overrides Sub WndProc(ByRef m As Message)Dim MousePosition As Point
Select Case m.Msg Case WM_NCMOUSEMOVE MousePosition = New Point(m.LParam.ToInt32())
If MousePosition.Y < 50 Then CloseButtonState = ButtonState.Flat
Else
CloseButtonState = ButtonState.Normal
[Code]...
I've got this MustInherit class called ViewerElement, from which derive classes like ViewerLine, ViewerImage, etc.Then, in the main program I have a collection of different elements (Images, Lines, etc.). What I want to do is something like the following:
[Code]...
I'm getting desperate to implement this Clone method without getting errors. How should this be de done?
