Get Using System.Management On Remote Computer
Jun 10, 2010Can you use System.Management to get CPU and memory information from a remote computer?
View 4 RepliesCan you use System.Management to get CPU and memory information from a remote computer?
View 4 RepliesI need to read the value of one subkey located under a list of 17,000 keys in windows registry. I have no problem doing it locally but cannot get the system.management name space to do the same remotely. I know MSDN documents the system.management name space but much more knowledge is assumed than in other areas I have used. Assume no problems with connection and authentication.[code]....
View 16 RepliesI am trying to set up an "AT" job to export some registry keys on a remote computer, the problem is that DOS command requires a time to run. I want to get the system time of the remote computer so i can schedule it to run 1 minute from the time i send the command.
Is there any way to get the system time of a remote computer with VB.Net code?
I'm trying to develop a windows application where i can get connected to remote server and look for process state going in remote server.We have many remote servers where automatic installation of software going on. We have an xml file(installstatus.xml) where it tells us at what stage the installation is (Example : Inprogress , Completed, Failed.)
So our aim is to develop a windows application where i can get connected to that servers and look for their installation status(may be we can use installstatus.xml to look for installation status). Every time i connect to a server, the server information should get stored in XML file(i want to create a xml file where all the servers list i connect to should get stored)
The UI at left side should will have list of servers i can connect to. When i get connected to server, at right side of UI, i want to display the status of installation (In progress, failed , completed).
I want to do a small application that made the broadcast of images from a PC. The idea is to make an application of remote management but without the management part, only with the viewing of images. Anyone know any code already done or any API that helps in the project?
View 8 RepliesI need to copy a file from a local computer to a remote computer on the network, if i try to use File.Copy without logon i get the following error:"Logon failure: unknown user name or bad password."How do I provide user name and password for file copy?
View 2 RepliesI tried to get os version of remote computer using ip address with WMI ,It shows "RPC server unavailable" error.If anybody have solution for getting remote system information without WMI in vbnet,
View 1 RepliesI want to find the computer which are connected with my computer via lan connection using vb.net code. actually a have a mini project in network connection setting.
View 1 RepliesWe have an VB.NET VS 2005 application that goes out and connects to remote computers on the network to gather information about the running services, processes, etc.
However, not all of the computers and servers are Windows boxes, and this is causing us some grief.
Is there a way in VB .NET to determine if a computer is running a Windows OS before trying to make a connection to it?
I am using VB Express 2008, and I'm experimenting with querying WMI. I have tried the code samples from MSDN, but they do not compile. Here is an example of code that my IDE doesn't like:
Imports System
Imports System.Management
Public Class Query_SelectQuery
Public Overloads Shared Function _
[code]....
In this case, SelectQuery and ManagementObjectSearcher are underlined with squiggly blue, and it doesn't know what these are. What am I missing here? Please help, because I'd love to be able to write console apps that query WMI.
I'm trying to write some code that can read events from another computer's event log. I haven't used WMI or System.Management all that much before this, and despite all the examples I've found on the web (there's a lot), I cannot authenticate to another machine.
No matter how I tweak the code, I always receive a System.UnauthorizedAccessException in System.Management.dll. (The message is "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))".) I have tried connecting to two different Vista machines on the network using their local user account information.[code]...
I want to learn by resolving a problem i have been having with my small car hire business.
I want to develop a system which will enable me manage the business efficiently, the solution should be able accessible to more than 1 users, on my LAN and i would also like to have a web reservation system.
How easy/difficult is this when using VB.Net and what things must i do at the onset to achieve my goal.
I am the beginner to .net framework itself.I am too confused whether to use asp.net using vb or just visual basic is enough?As I am just thinking over this topic.I feel this is not a website so not to go for asp.net.I thought to do it in
View 2 RepliesI'm using System.Management to get information about the computer like cpu id, mac address etc
Can i use it with win7 without problems because i know win7's security is not easy to work with.
As the beginner I want to know Is it necessary to add MDI parent for Library management System?
Can this be done without MDI Parent too?
And also is it necessary to add the below code for mdi parent of every project?
Private Sub ShowNewForm(ByVal sender As Object, ByVal e As EventArgs)
' Create a new instance of the child form.
[Code].....
I've been assigned to do some report analysis in a management information system.My question is, do you think it's a efficient way to gather datas from SQL, with the use of basic syntax and have them manipulated through my code in VB.NET?(I'm more skilled with this kind of execution, but it takes a lot of data calling from the database)Or should I just do the advance way of inner jointing or more likely a stored procedure?
View 2 Repliescreate database management system in vb 2008
View 2 RepliesDesigning the system of Pizza Management...I prefer to use vb.net language for developing because its more easy and more deploy able than others.
View 2 RepliesI ran accross this piece of code that uses the System.Management to get the free space on a drive for ONLY logical drives on Hard disks drives. It does this by check the Mediatype. Anybody know where I can find a listing of the Mediatype values? I would like to modify this to get free space only from USB flash drives.
[Code]...
I have read a ton of stuff about this but not getting it, noob error I am sure
Type 'System.Management.ManagementObject' is not defined.
Type 'System.Management.ManagementObjectCollection' is not defined.
Type 'System.Management.ManagementClass' is not defined.
[code].....
I'm looking at creating an asset management system for all our electrical equipment, the equipment already have security labels with barcodes on them. What I am wanting is to be able to do is create a form where i can state some general information about the piece of equipment and then scan a barcode to register the equipments security number. so that if an employee needs to use that piece of equipment off site then I can just scan the barcode and register that the employee has taken the equipment.
My understanding is that the barcode reader is generally plug and play and acts as an input device? So what I would need to do is find a way to identify which input device is used, and if it is the reader find a way to assign a labels text to the value that has been read, rather that insert it into a textbox? I also want to display the actual barcode itself above the label, so I assume I would need to re-generate the barcode as an image and then display the image?
Basically I am trying to create a child management system for a nurse using vb.net and SQL as my backend dbThe application consists of a number of differen forms. Two of these forms are called "frmSearchInfo" and "frmChildDetails".
frmSearchInfo consists of:
- three textboxes "SFirstName" "SLastName" and "SDOB"
- one button "BtnSend"
[code].....
When users enter details on form "frmSearchInfo" I want it to be able to search records in the database and return the same first name, second name and DOB as well as the ID, phone, addressline1, addressline2, county. I also want the datagrid to show dates of appointments for the children.The records needed are stored in the Child Table.
I have some software that does the following code to try to loop through the software (MSI's) that are installed on a machine. Originally it was passing in a package name as a parameter, but I've simplified my code to make it easier to follow. It was working before, I can't figure out why it's not now. Here's an example snippet with a package that doesn't exist:
Dim
sProdQrySql As
String
[code].....
I have created a windows Service which invokes executables on remote machines, waits for it to complete and then proceeds to the next machine on the network.
The Account type for the windows Service is "Network Service". For monitoring if the process is completed on the remote machine, I am using ManagementEventWatcher class. I get the following error when I start the Management event watcher object.
[Code]...
I have a VB.Net application that I wrote and want to run it from a remote computer. It runs fine on both computers but not visible on the remote's screen. The program is in the task bar and can be run or closed remotely. Just can't see the GUI
View 11 Replies2 remote computer by using vb.netcan u tell me some that relate with this ?
View 9 RepliesI have read syedwaqasali95's thread but found it rater confusing so thought I would post my query separately I am trying to build a library system for a local blind person's charity using Visual Basic. Their current system of recording is an Excell Spreadsheet that was created for them by someone else. What they have asked for is something more User Friendly.I thought about using Access first, but I wanted to hide the Data where it couldn't be modified by accident, and I wanted to make it as user friendly as possible so I opted for a VB WindowsFormApplication that will have a simple user interface albeit having to get more complicated under the hood.The library has two types of items that they lend, Audio Books, and Music CD's. Also there will need to be a record of the members creating three tables for my database.I should state that the library has a laidback lending approach whereby it is less worried about how long you borrow a book or CD, rather it just wants to keep a record of the location of said items.
I need help/pointing in the right direction with the following things 1) I want to prevent any ability to directly edit the datagridview data instead I want the user to highlight the entry in the datagridview, and then click an edit button which will open a form containing the record to be edited.
2) I want to be able to call information from the borrowers database, and to be able to apply it to the books data, so that the user can see who has what book at any given time.
e.g. the user highlights a record in datagridview and clicks the "Lend" button, this pops out a form allowing the user to search/choose from the list of members, once a member has been selected the save button (or confirm lend) would add the member info to the book table and close the form
3) I have a large amount of data (1500 records) in the original excel document, I would like to import these (once the database is ready to be compiled) so that they don't have to be re-input.
I am looking for an open source .net DMS. I know in the post below there are some c++ but am not familiar with it so that would be much help.I found this post but is was asked back in 2009 so there might have been some progress or additions to this? Open Source Document Management System in .net? The reason for open source is that I would like to be able to integrate it into something else later on. I would also need it to be a desktop based system and not web based.
View 1 RepliesI am a student of PGDCA. making a project of LIBRARY MANAGEMENT SYSTEM IN VB.NET 2005 VERSION.
View 4 RepliesI am able to query/read the "Application" event log using System.Management classes in VB.net 2005 (win xp)But I have problem reading the "Message" / "description" of my custom event log.I am getting a System.NullReferenceException{"Object reference not set to an instance of an object."} while reading the "Message" / "Description of the event log while it is reading the others properties.Also when I use System.Diagnostics.EventLog and read all the Events on by one I am able to read the message/description of my custom event log. Why is that the System.Management classes can't read the my custom event log messages while the System.Diagnostics.EventLog classes can read them.The reason I want to use System.Management classes is bcoz I can query my custom event log where as with System.Diagnostics.EventLog classes I have to read the whole event log.
View 2 Replies