I have created a Windows Service in VB.NET (VS2010) that executes a certain task every minute. When the service is being stopped, either manually by the user, or when the system is rebooted, what can I do to make sure the task is being finished properly before the service is actually terminated?
View 1 RepliesWe have a server with multiple services written in .Net 1.1 and 3.5 running on a Win 2003 server. Everything runs fine, but when we stop a certain service, an unrelated service stops. I have checked and neither has any dependencies. The service we stop is in 3.5, and the unrelated service that incorrectly stops is in 1.1. We get no error messages, nor event log errors, so we are baffled.Does anyone have an idea as to what may be causing this?
View 7 RepliesI wrote a custom windows service (VB .Net) to run some processing on data files in the background of one of our servers. The service basically finds the next file to process, breaks it apart and makes a PDF or two - nothing super complicated. It utilizes a timer, if a file is not found, it waits a bit and checks again (repeat indefinitely). The service has run for a week or two with no issues/pausing/stopping. I have plenty of error handling for this and I have not been able to break it... until today.
[Code]...
Since the coming of Windows7 at our office we have sometimes the issue that the print spool is crashing.Users don't have admin rights to restart the service so that leaves them only at restarting their computer as solution.Which costs alot of time... As we cannot find a final solution to this problem I've begin to write a small tool so they can restart it..I've only hard code a local admin account in the source for this operate for them..
[Code]...
I have a WCF service, which I can open and close by doing:[code]The problem with this is I have "downtime" of the service in between myService. Close() and newService.Open(). if anyone tries to connect while this is happening it fails. how can I make the "downtime" as small as possibel?
View 12 RepliesI know the title of this thread is a show stopper for a lot of us . But what I want to do is stop two services from running for a period of time then restart them. I know I can do this from the command prompt by using net stop servicename then restart with net start servicename. I need these two services stopped to do some work on the database. I do this manually right now and want to automate the process. I tried process.start with the command net stop but that did not work out. If I try the Process List I get the process running but not the services.
[Code]...
I am developing a Windows Service in VB2008 and am in the testing stage. What I have noticed is that if I Pause it while it is busy doing something and then resume it, the process generates an error. While I am debugging this I wanted to determine exactly what the difference is between Pausing/Resuming and Stopping/Starting a service.I searched, but most results simply told me how to Stop/Start/Pause and Resume a service, a hurdle that I jumped over many years ago. Does any one know of any resources that go into detail what happens when a service is stopped vs when it is paused?From some experimentation, it seems that if I do not place any code in the OnPause and OnContinue events the Pause/Resume commands have no effect.
View 1 Repliesi have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
I created a service in VB.NET and it runs fine on Vista, I can log off and switch users and the service auto starts and continues to run every time without fail.If I install and run the service on Windows 7, it will not start after a logg off/on or after I switch users.
View 3 RepliesI've just installed Visual Studio 2010 Express on a new laptop running Windows 7 64 bit.
When I debug a VB project and an error is encountered a message is sent to the immediate window, but execution is not halted. This means I am unable to look at variables etc.
I am trying to communicate with a Windows service on a remote machine on the network but i keep getting an exception saying the following: "System.InvalidOperationException: Cannot open Service Control Manager on computer 'machine001'. This operation might require other priviledges. ---> System.ComponentModel.Win32Exception: Access is denied.
[Code]...
Is it possible to have a dotnet windows service which monitor other services and upon stop of any service, the monitoring service would be able to start the stopped service.
View 4 RepliesIn the past I had the indexing service installed on a Windows Server 2003 and used it to index files for my website. I did this by executing an OleDbCommand with a query and a connection string.How do I accomplish the same thing with the new "Windows Search Service" (Windows Server 2008) by using VB.NET? Does this work the same way so that I only need to change the Provider name which has been "MSIDXS.1" up to now? Case true, what is the new Provider name?
View 1 RepliesWhen you create a Windows Service, you create a list of the services you want to start. The default is this:
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service}
Can you have multiple instances of the same Service class (that bind to different addresses or ports), like this?
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service("Option1"), New Service("Option2")}
Or will that cause problems? Should we use two different classes instead?
I am working on a VB.Net application that needs to access a web service that I am nearly certain has a C# backend. At bare minimum, the backend is providing classes to me that are differentiated only by case, and within a number of those classes, there are properties and methods that are only differentiated by case.
VB.Net is case insensitive, and it sees a number of these items as being ambiguous.I've thought of a few ways of dealing with this, but I would like suggestions before I go down a road that is likely difficult.
Here are some ways I have considered going about it.Modifying the generated code for the wsdl. This has presented problems in responding as the xml output would no longer conform to the webservice requirements.I think there might be some attributes I could use to override this, but I'm not sure what they are yet. Even so, this web service gets frequent updates and I would hate to have to keep refixing the service every time I refreshed it.Creating a csharp wrapper project where I expose the underlying classes with different names. Primarily through inheritance. Although the big problem here has been the issue with properties and methods that are only differentiated by case as well.
I'm sure at some point I could get one or the other of these solutions working, but if anyone has any better suggestions that I'm not thinking of,
I am using this method to install windows service
processInstaller = New ServiceProcessInstaller()
serviceInstaller1 = New ServiceInstaller()
serviceInstaller2 = New ServiceInstaller()[code].....
How can I get the account name after whenever the service is started ?
I am using a windows service and tried to copy some file as below,System.IO.File.Copy("Z:abc.txt", "C:helloworld.txt")Note: Z: is a map drive from another host in 1 LAN (same LAN)I got error, "Could not find a part of the path 'Z:abc.txt'."But when I tried it at a simple application using windows application, it works with the same code as above.
View 8 RepliesTried to write my first Windoes Service yesterday with a certain degree of success but I couldnt install it.Upon running teh Install programme in the command line I was presented with a 'Set Service Login' window with a User ID, Password and Confirm Password text box.I attempted to use my windows login credentials but the install failed and was rolled back.Im using a computer on a company network with Win2k?
View 6 RepliesI've created a windows service and started a deployment project for it. I have the project installer class in the service project and I've added the "Standard output etc.." from the service project as custom actions for the Deployment Project. When I attempt to install it, I get the error "Specified service already exists", which shouldn't happen (even though the service does exist) because the installer should be removing the old service and installing the new one.
I've checked that the versions are different, and that the Product Code is also different, also RemovePreviousVersions is set to true. Can anyone tell me why it isn't uninstalling my old service when I update then install again? .S: MODS: DO NOT MARK MY POST AS ANSWERED, IT IS RUDE, YOU HAVE NO IDEA IF YOU'VE ANSWERED MY QUESTION!Sorry, it gets ignored in my signature.Mods
I have a .net Windows Service developed in VB.net. I have a settings file in the root directory called Connections.XML and I am setting the basedirectory [code]...
When I schedule the service this is working absolutely fine in my Windows XP machine. But when I installed the same service in our development server (Windows 2003 64 bit Server) for some reason it is not able to locate this file.
It is possible to create windows service using windows form control in vb.net. give me the url or links. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 1 RepliesI'm porting code that I wrote for use in a Windows Forms application to a Windows Service, but for some reason, the code that worked in the Windows Forms application is now throwing errors in the Service
View 7 RepliesIt is possible to create windows service using windows form control in vb.net.If yes then please give me the url or links.
View 1 RepliesI have developed a Windows Service in VB.Net (VS2010) which is running on Windows7. I am trying to get "MainWindowTitle" for processes thru their process object but it returns empty.
[Code]...
I'm writing a windows service (MacTimeFix.exe) to fix the Windows time on a Macintosh (it's like this: i live in Moscow (GMT+03:00), and Mac OS thinks that the system time is GMT+00:00 and adds 03:00 to it< and Windows thinks that system time is the local time).I need to execute my code when my VB app is closed. (it happens with the shutdown of Windows) The form is invisible (hidden), and the user mustn't click anything except windws shutdown button. It is a service. When i write a Form1_FormClosing sub, it works only on Alt+F4 or CloseButton and doesn't work when the app is stopped from Windows Task Manager or whatever also.I need a way to execute sub when app is closed with taskkill (without /force) or a way to execute a several app on Winshutdown.
Here is my code:
Public Class Form1
Dim SystemMary As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Me.Load
SystemMary = Mid(TimeString, 1, 2)
[code].....
It is possible to create windows service using windows form control in vb.net. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 2 RepliesI'm printing pdf files via the below code in a service. In Windows 7 this works really well, In Windows Vista, nothing happens at all? What am I doing wrong?
[Code]...
I am working on a .NET Windows Service where I am trying to store settings that will be used when the service is started and while it is running. I have searched through posts on SO and found that using the Settings in the properties of the project is great for use with console and winforms applications. However, Google and SO are silent when it pertains to storing these settings with a windows service.
View 4 RepliesIs there a way in which I could invoke a windows form from a particular windows service....??
Have created a windows service, installed it and everything is working fine... Now I want to design another windows form that I would call from the service while running it I know that with the help of ServiceController class we could interact with windows service from a windows application but am not sure of the other way round implementation....
Is there a way to basically merge a Windows Forms Application with a Windows Service Application and allow the passing of parameters on start up to determine if it should start the standard GUI or launch as a system service
View 4 Replies