I am trying to create an inherited form- when I go to add it, I get the following message- "CustomerInformation --- The base class 'Object' could not be loaded. Ensure the assembly has been referenced and that all projects have been built"
View 3 RepliesI have a base form and I inherit other forms from it. However, if i go back and change say the size of the base form, I don't see those changes take effect in my inherited forms. Does anyone know why that is? Is there a solution to this issue?So as far as design is goes, what exactly gets inherited by other forms?
View 9 RepliesI am having a problem with closing a form which I have inherited I have a form called frmAddForm_Simple, which contains 4 main controls (A Data Grid, A Save Button, A Close Button and a Text Box). The idea around the form is to create a form which could be used for inputting of many different types of data which are all entered in the same way (i.e. to add a new row to a database for [Status] table or [Location] table, all of which contain 2 columns in the database (an [Id] and a [value]). On the form I have a property called _FormChanged, which when the textbox text changes, sets the property to True. I then have the following code on the Close Button:-
Public Sub btnClose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClose.Click
If _FormChanged Then
If MessageBox.Show("Are you sure you want to close and discard any changes?", "Discard Changes",
[CODE]...
Is opened as a dialog (ShowDialog) and when I go to close the inherited form (by click on btnClose) and answer No to the above MessageBox the form closes anyway. Using the Debugged I have worked out that the following events occur in sequence (all of which runs in the Master Form mentioned above):-
1) btnClose_Click sub Routine runs
2) I answer No to the question do I want to close the form
3) The debugger steps over the Me.Close() line (as expected)
4) The debugger jumps up to the Sub Initialise (where ShowDialog was called from) and closes the form.
So at no point has the debugger even ran a line of code which reads Me.Close(), but the form closes anyway so Im fairly confused as to why the form should close.
My Master Form (frmAddForm_Simple) Code:-
Public Class frmAddForm_Simple
Private _FormChanged As Boolean = False
Private _FormLoading As Boolean = False
[CODE].............................
I'm currently working on binding an objects properties to fields on a Form. Whilst I have managed to get it so that I can get standard objects to bind, I am having a problem figuring out how I would go about binding an inherited object.
For example, if I had a Client class (the parent class) and then two sub-classes called CompanyClient and IndividualClient. The CompanyClient would have an extra field company name for example.The problem I'm having is that I'm not certain how to set up the binding, as if I set up the binding against the Client class then I would be missing the Company Name property for the CompanyClient, if I set up against the CompanyClient, then it wouldn't work with the IndividualClient as it doesn't have all the fields.
I know I could get around this by having different forms for each of the different Client types, but as almost all of the properties are the same I would like to avoid this if I can.I was wondering whether anyone knows how I might be able to go about doing this
I have a an inherited form that has a panel control on it. I want to paste other controls onto this panel but the paste option is grayed out and won't let me do it. I made sure that the template form did not lock the panel. I'm stymied from making progress until I can get this resolved.
View 2 RepliesMainForm having a few buttons, VolForm is inheriting MainForm. I can see this perfectly in the designer.VolForm itself contains a trackbar. Now have 2 forms. Form1 and Form2 both inherit VolForm. If I change the trackbar from Form1, and then show Form2, the trackbar is not having the same value. Is there any way to keep this trackbar the same in every form that inherits VolForm?
View 2 RepliesUnable to add Controls to Inherited Form I should be able to add an inherited form by simply[code]...
View 2 RepliesI'm trying to create my own control to build a custom planning on it.After trying it with loose controls I got an error but after advice on my previous post, I redraw everything.I have now the header of the control finished, the header shows the days of the month for as many months that fit in the window.Now I want to put the list of data below it, but it will be more than the windows height, so I need to have a scroll bar that will scroll the data but not the header.I would not like to design my own scrollbar and rather use the scrollbar control for it, but when I put it in, I cannot use the NEW keyword.example:
Dim sb
As
ScrollBar
with this I get the error message: 'New' cannot be used on a class that is declared 'MustInherit'.How can I get a scrollbar on my form to scroll the list only (so not the header)?
This might seem like an odd question, but is there a way to make it so that any form that is created based on another, would have some comments in the code behind of the new form?
For example, i create a form called frmONE, and i put in code like this:
Overridable Sub frmONE_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Make sure you call these functions, in this order:
[Code]....
I have a program I've been working on for some time now and I'd like to try to streamline it somewhat. I have a main menu form that has a split panel, in the left panel is a treeview that displays forms you can open and when one is selected, it opens in a child window in the right panel. Each time I open form I called DWNForm, it does a series of dataset loads which are the populating items for a series of listviews.
What I would like to do is have these datasets load once during the mainMenu load and then have the DWNForm be able to access the datasets once it is called from the treeview selection.
I am trying to use a progressbar to show on main form and then finish when next form is loaded, I have got this code.
1. When I click on button, it must open next form, but the next form must only open when the data in my list box has been loaded from Access Databse. When I run my program, it only shows the progressbar and don't open the next form.
Main form code:
Public Class Main
Dim PB As ProgressBar
Private Sub main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
[CODE]............................
Pretending I have a class that inherits off Control, how would I handle the parent form's Resize and Move events within the control? I have a painting glitch that happens when the form is resized or moved. Right now in the form I just have:
vb.net Private Sub frmMain_ResizeMove(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles Me.Resize, Me.Move Me.Refresh()End Sub
But this can't be the proper way to do it, considering Refresh() invalidates all children (will be slow and flashing if the form has lots of controls). I want to basically do the above code inside the control.
Edit:This is the glitch after a resize of the parent form:
And this is what the button is supposed to look like:
Also, I experience this issue if something like a message box is dragged over top of it. How can I remedy these issues by forcing a repaint?
I want to know if vb .net form can be also loaded into browser.And how it will done?
View 3 RepliesI want to draw a histogram when Form2 is loaded, I load Form2 using button of Form1 It didnt work, Form2 is loaded, but no image...i dont know why here's the code
Private Sub Form2_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles MyBase.Paint
Dim img As Graphics = PictureBox1.CreateGraphics
[Code]....
Is there a way to check if a form has been loaded yet? I saw in C# they have a isLoaded property, but it doesn't seem to exist in the VB.Net Form class?
View 17 RepliesHow do you auto refresh after a form has already been loaded?
View 4 RepliesPrivate Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.Hide()
End Sub
I want to hide the main form when it is loaded, but the code above doesn't work. Can anyone show me how to do that?
I am learning VB.NET and as a first task I am creating a login form. I've been trying to link it to another form once a correct username and password are entered. However, despite that I still cant be able to hide it or unload it once the next form is loaded.
Here is the Code
Private Sub OK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OK.Click
If UsernameTextBox.Text = "chris" And PasswordTextBox.Text = "chrispass" Then
Me.Hide()
Form2.Show()
End If
Me.Close()
End Sub
The Form2 appears as coded above but the 'Me.Hide()' manages to hide the login form but then it appears again.
I have a form that contains two datagridview. I need to load the form first or anything that shows a "loading please wait.." form while the two grids load.Basing on your experience what are the ways to do this?
View 1 RepliesSo just to get better at VB, I'm trying to make this application that takes pictures from your clipboard and uploads them. I'm adding a label, that will tell you if there's anything in your clipboard or not, but the problem with that is that I don't know how to make it check the clipboard all the time.I'm still a beginner, so I only know how to make the app do something when a Form has loaded up, or clicked etc., but how do I make it so it checks the clipboard when it has changed? If I can't do it, how do I make it so it checks the clipboard like maybe every second. Do I need to use threads (I'm not sure, because I don't quite fully understand threads).
View 2 RepliesI have created my app to load with a argument
now, what I want to know if it's possible to pass the load argument even if app is loaded
like
app.exe -a = loads a special form on app.exe at load time
and if app.exe is already loaded to load same form if user requests it again from a shortcut or so
How do you check to see if a form is already loaded, ie if it is already loaded bring to the front else load the form.
View 3 RepliesI have a very simple form with a combo box named txtRoomType bound to ROOMCODESBINDINGSOURCE and a DGV bound using ROOMPRICINGBINDINGSOURCE.
Public Class frmShowRoomPricing
Private Sub frmShowRoomPricing_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
When I check the value of txtRoomCode when the form is loaded for a 2nd time it tells me it is blank, but there is a value in it. I think the fault is in the form_load, but I do not know why.
I am designing a form that will create a template of data that will later be loaded into another form.From a menu command "Create New Template" I will need to ask how many Fields will be needed for the new template in an input box. If the user would input say 10, then I need to generate 10 labels, 10 text boxes, & 10 combo boxes. Each group (label, Text Box & Combo Box) on its own row on the form.I also want create the data mapping for each of them at this time.Once I have achieved this then I will add a form that will lookup the template name, and row count given from the above form via the database and load the required rows of items for further data entry.
Since I will have a MAX row limit I thought about designing a form using a Table Layout panel with 25 Rows and 5 columns then doing some sort of .visible true/false for the layout panel row after the user input of row/field quantities.Another question is resizing the form around only the visible rows.
the project i am currently working on has a form in it that has quite a few objects that take a couple of seconds to load. Because of that, if i simply use the .show command, the form shows up, but there are a bunch of blank white boxes where the content is still loading, how can i have the form not become visible until ALL of the contents and images inside are fully loaded?
View 1 RepliesHow could i make sure that only one instance of a child form is loaded in my application.
View 3 RepliesIs it possible in VB .NET to find out if a form is loaded? Also, is it possible to find out if a form is shown at the moment? I think for the second issue it's enough to get the value of the property of the form:
MyForm.Visible
However, I don't know how I could find out if a form is loaded or not.
Is it possible to run a function or to execute a button just after the form was loaded? I mean to execute it just as the form_load subroutine has ended, so the form is already being displayed.
View 2 RepliesMy company's main software package includes a hefty configuration library which loads on startup. This config library includes some mandatory settings which, if not supplied (via command line arguments), cause the entire application to exit.
This has never been an issue for our users, who launch the software via scripts which have the needed command line arguments supplied automatically. But sometimes when debugging our software we developers forget to specify the necessary arguments in Visual Studio's debug options; it's then very annoying to be greeted with the message Config specification invalid -- missing required parameters X, Y, and Z -- shutting down (I'm paraphrasing, of course).[code]...
I am making this program that has a loop that goes to a website and fills in a form within the loop. But first, here is my code thus far
Dim message As String = TextBox3.Text
Dim loopnumber As Integer = TextBox4.Text 'makes the necessary variables
Dim browser As New WebBrowser
Dim url As String
[Code] .....
But what happens is that the loop runs a few times then it errors on the setattribute line (line 19 above) with
NullRefrenceException was unhandled
And I have a feeling that it is not loading the page fully before it tries to fill in the form.