I am making pictureboxes as enemies, and i have a picturebox that that user controls. I want the enemies to move towards the user's picturebox, regardless of their position (Which will be random!).
View 2 RepliesHey I am making a GDI++ game in vb.net. Now what I want is the monster(picturebox) to go after the player(picturebox). There Are No Vertical Walls. Only The Edge of map barriers. For example to get to the player the AI would have to go to the end of the ledge and either jump off and fall to the lower ledge or take the ladder down. There is no jumping, only falling and going up and down ladders and across the horizontal ledges. So How Can I make this pathfinding system?
View 18 RepliesI am creating a vending machine that has moving items. My issue is making a certain picturebox move left/right to a specified point, then down to the " Item return" label. I'm using a timer to make the items move. I just cant figure out how to get this item to stop then go down then stop again.
After that I'll display a message telling the user the item is ready. How would i get the item I moved to go back to it's original place?
How do I make a picture box follow a designated pathway. I have made a game where I have several picture boxes that follow each other. and want on of the trails to be able to do its own course. I have noticed that picturebox.left = picturebox.left + 10 works only for going left but picturebox.right = picturebox.right + 10 it saids read only. so I tried doing minus 10, though i don't know a condition how to do it. like how do it make it turn around when it's 10 from the boarder?
View 13 RepliesIm setting the standard program to .jpg files to my program. So when it starts it shows the picture in a picturebox ofcourse.
My problems:I want the pictures standard size to be the size of the picturebox.Making the picture open in the picturebox?
I'm doing a pacman game and im stuck on how to make the pellets. This is the code i have so far.I was thinking of maybe making a picturebox for every pellet and then make an if statement that if pacman goes on a pellet it disappears and he gains a point. But this would be a VEERRRYYYY large if statement and im sure there is a better way to do it.
View 3 RepliesThe basis of the program is that the user enters info into to text boxes then hits a button, when the button is clicked and all the parameters are met, the visible property of a rather large picture box becomes true. What I want to do is have the form start off small, just big enough to hold the labels, text boxes and buttons and then resize when the picture box is made visible.
View 2 RepliesI have a few pictureboxes that move and contain an image of a fish. When they overlap, I would like to be able to see one fish under the other fish.I have made the background (white) of the image transparent in photoshop and the background color of the form seems to show through the background of the fish image, but when 2 fish overlap, ones background covers up the other.
View 1 RepliesI have a userControl with a picturebox in it. I need the areas of the userControl to be transparent and unclickable on the main form. After some searching Ive come up with this. [URL] but it doesn't seem to work. I have it set up so the usercontrol can be drag-and-dropped. but I dont want transparent areas to be dragable.
View 1 Replieswhen adding picture to dynamic picturebox from my.resources in .dll a duplicate semi functional picturebox is added too, behind the picturebox i intended to add. has anyone seen this happening before or can provide any insight into this?
View 1 RepliesIn VB6 I used some pattern of programming..I passed the picturebox as parameter to some procedure in some class and inside this procedure paint all needed graphics using this class methods.Now I want upgrade my application to vb.netBut all samples for line drawing show me how to draw inside paint event.[code]
View 2 RepliesI have a PaintEventHandler connected to a picturebox via AddHandler.
In PaintEventHandler I have coded this for writing the drawing to PictureBox1.Image:
Dim PictureBox1 As PictureBox = CType(sender, PictureBox)
PictureBox1.Image = New Bitmap(PictureBox1.Width, PictureBox1.Height)
Dim bmp As Image = PictureBox1.Image
Dim g As Graphics = Graphics.FromImage(bmp)
... drawing something ...
PictureBox1.Image = bmp
Everything works fine but after running through the paint event handler and showing the picture on the screen it calls the painthandler again and again. It does not stop.
Replacing the code above with
Dim g As Graphics = e.Graphics
Makes it running. But then I cant save the Image to a file.
I have a program I'm working on that, for one of the features, allows the user to drag an image from a picturebox, into the main form space, anywhere they want. [code]...
When trying to drag the image from the CurrentTilePicBox, the very moment I move the mouse while dragging the cursor becomes a circle with a cross and won't drag and drop into the new picturebox.
I have a panel, which contaisn two Pictures.When the panel is mousehover the Pictures appears. When the panel is mouseleave the Pictures disappears.However, when I'm trying to pass the mouse between the Picturebox and Panel, the Picturebox disappears, because the panel doesn't detect that as panel area.
Private Sub Panel_MouseHover(ByVal sender As Object, ByVal e As System.EventArgs) Handles Panel.MouseHover
Me.NextIMG.Visible = True
Me.PrevIMG.Visible = True
End Sub
Private Sub Panel_MouseLeave(ByVal sender As Object, ByVal e As System.EventArgs) Handles Panel.MouseLeave
Me.NextIMG.Visible = False
Me.PrevIMG.Visible = False
[code].....
My app has scrolling images in the background and a picturebox on top. The image in the picturebox has transparent parts. How can It so that the transparent parts show whatever is belo the picture box, not the form background? I have tried taking screenshots and positioning them as background but this just freezes the app.
Dim ScreenSize As Size = New Size(154, 83)
Dim screenGrab As New Bitmap(154, 83)
Dim blank As New Bitmap(100, 300)
[CODE]...
I need to plot some analog values read from the serial port.I plot them in a picturebox starting from left. When I reach the end of the control at the right side I shift all values to the left of a point and I plot the new point at the right, (I have some flickering but it could be acceptable). This is my plotting control.My problem is that I have to clear the control (picturebox) in order to plot the shifted graph, but the method Clear of the Graphics class clears everything inside the picturebox, even my grid.How can i make always visible a grid "in" my picturebox?
1.a transparent image with a grid over the PB? (the clear method cannot remove it)
2.an image with a grid below the picturebox that must be with a transparent background to make visible the grid?
3.multiple layers on the same picturebox?
i'm doing a simple form tat could add picturebox during runtime and i could add several picture into it.
View 5 RepliesOk, so I have a new challenge for the D.I.C. Heads. I'm making a simple little game using VB controls. I know it's not the best idea in the world but it'll have to do for now!
Here is whats happening. I've created a class that inherits the PictureBox control that I want to use to place my game pieces on the playing field.
Dim pbArmyUnit(0) As ArmyUnit ' ArmyUnit is a Class that inherits Picturebox now I create the playing pieces at runtime as needed and append them to the array. Player currently buys the units and places them on the playing field.
[Code]...
On a side note how can I look at a stack of pictureboxes all created at runtime to determine whats at a particular location? Example. I move my army unit over top of the picturebox that shows my forest. How can I tell what picturebox I just moved on top of? does that make sense? I don't need code for this just directions on looking at the right info so I can figure it out.
I am creating my terrain at runtime as well since it's randomly generated. and I'm basically making an array of 192 pictureboxes with the appropriate terrain image as well as some other modifiers. Just like with my armies above I've inherited picturebox and created a terrain class array, this way I'm able to add my movement modifiers etc, directly to the picturebox I place on the screen. It's these pieces of terrain that I want to be able to check before allowing the unit to move into them! to get movement costs etc.
how do i create an event for MouseEnter but instead of the mouse a picturebox?
View 5 RepliesI have a picturebox on a form. The image in the picturebox is actually a report. I want it so if the user clicks on it it will zoom larger --- while the picturebox remains the same size. Of course, the entire image will no longer be seen. So I also want to be able to drap this image around with the cursor. The examples I've found for picturebox zooming cause the picturebox itself to get bigger and smaller. I need it to be like an Access report. Click on the report and it gets bigger. Click again and it goes back to the full image. Does anyone know of an example or tutorial in VB.Net for this type of zoom-with-fixed-size picturebox function?
View 2 RepliesI am trying to draw a line on top of a picturebox but it keeps going behind the picturebox, even when I do Line.BringToFront()
View 10 RepliesI was wondering how could I drag an image from a picturebox to another picture box. Anyone knows? Any tut or something.
View 10 RepliesI am working on a small desktop form in VB 2010 and am trying to place a pictureBox with an image in it, next to another pictureBox already located on the form when the user clicks a button.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim tool As String
[Code]....
But for some reason the newPictureBox with image from "ptext" does not show up on the form. When I specify the new Point to be something like, (50,50) instead of getting the first pictureBox coordinates, the new pictureBox shows up in the right place.
Am I using System.Drawing.Point wrong? Or is there some other error that I'm making?
How can I get the xml in to a dynamicly created picturebox as a name
Dim SongXmlElement = <PlayList>
<%= From item In El_Song.Elements Select item %>
</PlayList>
[Code]...
i would like to drag a picturebox inside of another picturebox and I think I already made it. the problem is the object I am trying to drag is behind the picturebox ....how to I make it so that it will appear infront of the picture box? also when I drag it out again of the picturebox I would like to restrict it so that dragging out of the picturebox is not anymore possible?
HTML
Public Class Form1
Dim dragging As Boolean
Dim mousex As Integer
Dim mousey As Integer
[code]....
I am trying to make a picturebox follow another picturebox. But I also want this picturebox to be able to collide with the other picturebox if the picturbox stops. I hope this is not too confusing. I cannot figure this one out. The code below is probably nothing like what I should be doing, but i cannot think of any other way to do what I want.
PictureBox1.Location = New Point(PictureBox2.Location.X)
PictureBox1.Location = New Point(PictureBox2.Location.Y)
I have two Picturebox and both should be transparent background, but the real problem is both transparent for form background but not over each other .
View 1 RepliesIn my program the PictureBox arriving later in program
casts a much larger needed shaddow over the base picture.
The shaddow would not show on my computer but it appears
when I run the same program on another computer.
Is there a trick to make the shaddow go away?
I know when I draw to the form and add controls I get a flicker effect.If I draw to a picturebox on the form and add controls will the picturebox flicker?
View 4 RepliesIn VB6 I could embed a panel or picturebox containing controls or images within an outer panel or picturebox. If I moved the outer control then the embedded panel would move with the outer panel and stay in the same relative position, which is what I require. This doesn't seem to happen in VB.NET, the internal panel stays fixed in its location, even if I have pasted this panel within the outer container. Is there are trick to this or do I have to code to get the internal panel to move with the outer one? How does an internal container remain embedded within an outer one?
View 4 Replies