Pass Clicked Button As An Argument In A Function?
Apr 26, 2011How can i pass the button click as an argument in a function.
View 6 Replies
ADVERTISEMENT
Pass An Array Of Arrays As A Function Argument?
Nov 11, 2010I have several parameters consisting of separate System.Byte() arrays. What I need is the syntax for a function declaration where the parameter is an array of arrays - I do not want to delve into System.Collections, and it's my preference not to CType each array into an Object and then back into a Byte().
Problem I'm having here is that:
Public Function MyFunc(arrayparam() As System.Byte) As System.Byte()
accepts a single-dimensional Array of individual Bytes.
Then Public Function MyFunc(arrayparam() As System.Byte()) As System.Byte()
Pass A Value From A Sub Procedure To A Function Procedure .... Pass The Whole Subprocedure To The Function Procedure Argument?
Mar 30, 2012Im a student doing an assignment, how do i pass the value from a sub procedure to a function procedure....i want to pass the value from decSubtotal to a function procedure named CalculateDiscount; check out my code--
[Code]...
Call Jquery Function When Asp.net Button Is Clicked?
Jan 19, 2011[code]...
How can i call this function when an asp.net button is clicked? [url]...
Create A Function That Checks To See What Button Has Been Clicked?
Apr 29, 2009I wanted to create a function that checks to see what button has been clicked on the windows form. For example If I had 10 generic buttons that open up different audio files. I would I create one Sub that can verify which button has been selected. I was either going to use a case statement or an if else. I did not want to create one sub for each button since it would be a lot of duplication in code.
View 2 RepliesPass Radio Button Parameter To Another Function?
Oct 31, 2011I have 2 functions, one is SaveData() and the other is SendEmail()
in the SaveData() the radio buttons that are selected are saved, and the SendMail() is called at the end.
in the SendMail() the radio buttons are "tested" and then one of two emails is sent out based on the radio choices.
The problem I am having is passing the parameters correctly. I have tried several different method but the parameters are not being sent to SendMail()[code]...
How To Pass Array As Argument
Mar 6, 2010Does the following work in VB 2008 for passing an array to a function:
Public Function functionname(ByVal array1() As Short, ByVal array2() as Short) As Short
Also, can ByRef be used in place of ByVal?
Pass An Address Of A Sub As An Argument?
Feb 12, 2011Private Sub SpecialMenu( ByVal ddItems As ToolStripItemCollection, method as ??)
...
AddHandler ddItems(item).Click, AddressOf method
...
How can I pass a sub address into a subroutine.
I understand delagates but not enough to figure this out.
I have a sub that creates and adds menu items to a menu and I need to use it in more than one project so I want to put it into a library.
But I don't know how pass it the address of the subs to attach to the new menu items.
Pass Argument To Sub Then Add To ListView
Mar 5, 2009I am trying to pass an argument to a sub then have it add to my listview, my code is:
Module modFunctionsSubs
'Function and sub routines
'This sub logs an even in the listview
Public Sub logEvent(ByVal statusText As String)
listViewMainLog.Items.Add(statusText)
End Sub
End Module
My argument is getting through ok, statusText but I get an error:
'Name listViewMainLog is not declared'
Pass More Than 2 Argument To Events
Nov 10, 2009Can we pass more than 2 argument to our events, tell me in brief about Events
View 1 RepliesForms :: Pass UserControl As An Argument?
Sep 8, 2010I've got several user controls and every time I add them, I post this
Dim uc As New ucTemplates ' 'ucTemplates' is the name of the actual user contrll
gbControls.Controls.Clear()
gbControls.Controls.Add(uc)
So, I'd like to create a sub that does the same thing, passing the usercontrol as an argument
Private Sub AddUC(myControl as UserControl)
gbControls.Controls.Clear()
gbControls.Controls.Add(myControl)
End Sub
But - when I try:
addUC(ucTemplates)
I get an error that ucTemplates is a type and cannot be used as an expression
I can get it working if I add the Dim uc As New before the addUC - but I'd rather have it so I only repeat one line, not 2
How To Pass A Command Line Argument
Feb 16, 2012I know how to pass arguments between two dotnet applications! However I have hard time with this: I want to pass a command line argument. for example; test.exe is a console application (none dotnet) self terminating app. From cmd.exe if I type "test.exe -v" the cmd output text will display the test.exe version info. If I place the test.exe in the same path as my VB.net app.What I want to do is:
[Code]....
Pass Any Command Line Argument?
Jan 4, 2006How, can i pass any command line arguments (Through Run Command)pass when my VB application execute and that's valuesare receive when form activate.
View 12 RepliesPass Argument When Form Is Loaded?
Mar 28, 2011I have created my app to load with a argument
now, what I want to know if it's possible to pass the load argument even if app is loaded
like
app.exe -a = loads a special form on app.exe at load time
and if app.exe is already loaded to load same form if user requests it again from a shortcut or so
Pass Listbox Control As Argument?
Feb 16, 2012<p>I'm trying to use a function that takes a variable referring to various listboxes.</p><p>Something along the lines of:</p><p>Calling code:</p><p>...</p><p> Dim lstBox
as ListBox</p><p> if a=1 then lstBox = Me.ListBox1 else lstBox = Me.ListBox2</p><p> MyFunction(lstBox)</p><p>...</p><p></p><p>Called function:</p><p>
public sub MyFunction(lstCtrl as ListBox)</p><p></p><p>lstCtrl.Add()....</p><p></p>
Unable To Pass String Argument?
Mar 7, 2010The problem that I am facing is that I want to call a shared DLL created by qt4. Now reading the result from the DLL file is working well and good. But the problem arised while passing arguments required by the function in the dll file.The argument (both string or int) is not passed properly. Suppose I pass an integer argument 8, but 1 is passed. Whatever is my input only 1 is passed.
View 2 RepliesPass An Argument To Dispatcher Object In Program?
Aug 22, 2010In a threaded app in VB 2010, I can do this[code]...
View 6 RepliesUse Form Handle In Class Without Pass It As Argument?
May 3, 2012I'm writting a class that needs the form handle but there is a way to use it without send it as argument in the class constructor or in a property?I know that the handler is not set until the form is completely loaded so that is another problem too.The basic idea is catch the form handle without pass it as argument and handle the wm messages.
View 2 RepliesHow To Pass A Function To A Function Is Functors/function Objects Avaiable In VB2010
Oct 12, 2011I want to make an numerical integration method with takes in an analytic function and integrate it over a specific interval. For the numerical integration procedure I want to use some procedures in nr.com. The problem is that these are programmed in C++ and they uses functors to pass a function to the integration method. How can I do this in VB 2010?
I want to initialize the function (i.e. set a=1,b=0 for function y(x)=a*x+b) and then pass the function to the integration method. Then when the integration method call the function it only calls the function with one parameter (i.e. x since a,b is already set)
What is the best way to do this in VB2010?I want to make a general integration method where I can pass any single valued function and integration limits.
I have just started using VB, and from what I have found so far it seems like the tools you have is
- to us a delegate for the function
- to use a lambda expression for the function
- send a pointer/adressOf
- to create a function class/structure and submit this to the function
As for now I am most inclined to create a function-class. But I am not really sure how.F.ex. I make different classes for each "uniqe function" I want to integrate, but how can I pass them to the integration function when I need to specify the argument type in the integration-function-call?This seems like a basic problem which applies to many Math operations, so I think it would be very useful to clarify this.
Press A Button - If I Clicked The Button In Form2 It Would Automaticlly, Click The Button In Form1?
Oct 30, 2010Using 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
How To Pass File Name Clicked To Program
Nov 28, 2009Suppose I save a file as *.tar (this extension is my own making) using a vb6 program. Now when the user clicks this file, the window asks 'with what program to open this file' and he/she selects the exe of my program. Now I want to pass the name of file clicked to my program. Like when we click *.xls file, the exe of Excel program knows which file has been opened or clicked. Is there a way?
View 5 RepliesButton Click Reference - What Is Identifier For Most Recent Button Clicked
Jul 6, 2010I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName)
If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then
ButtonName.BorderBrush = Brushes.Black
[code]....
Make A Link Button Visible After Another Button Has Been Clicked In Asp.net In Button_click()
May 14, 2010How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim receipt As LinkButton = FormView1.FindControl("LinkButton1")
' receipt.Enabled = "true"
[Code].....
Save The Last Dragged Button On The Form And Also Detect The Name Of The Last Clicked Button?
Sep 5, 2009I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[code]...
Argument Not Specified For Parameter Of Private Function
Mar 3, 2011I am using visual basic and trying to create function. I am getting this error:
"Argument not specified for parameter '_IsDayRateCheckBox' of private function CalculateParikingCharges(_HoursDecimal As Decimal, _IsDayRateCheckBox As System.Windows.Forms.CheckBox) As Decimal'.
This is the code.
Private Function CalculateParkingCharges(ByVal _HoursDecimal As Decimal, ByVal _IsDayRateCheckBox As CheckBox) As Decimal
This is how I call the function.
Dim HoursDecimal As Decimal
Dim AmountOwedDecimal As Decimal
If Not Decimal.TryParse(HoursTextBox.Text, HoursDecimal) OrElse HoursDecimal < 0D Then
ErrorLabel.Visible = True
HoursTextBox.Focus()
[Code] .....
Argument Not Specified For Parameters Of Public Function
Feb 19, 2011I have to create a program that finds the total cost for pizza, fries, and soft drinks, and places that in a list box. So far, though, I'm stuck. I have this code so far:
Public
Class frmBill
Private
Sub btnTotal_Click(ByVal
sender As System.Object,
[Code] .....
The errors that I am getting are:
"Argument not specified for parameter 'D' of Public Function totalBill(P As Double, F As Double, D As Double)
"Argument not specified for parameter 'F' of Public Function totalBill(P As Double, F As Double, D As Double)
"Argument not specified for parameter 'P' of Public Function totalBill(P As Double, F As Double, D As Double)"
Convert Argument Function In Hashtable?
Jul 23, 2010I try to convert names and values parameters of function into a hashtable. For name of parameter, it's ok, but not for value.
Function test(ByVal param1 As String, ByVal param2 As String) As Hashtable
Dim hash As Hashtable = New Hashtable
Dim stFrame As New StackFrame
[Code]....
There is a property to get default value of parameter (if optional) with param.DefaultValue but how to get current value ?
Pass Function (Of TElement / TKey) As A Function Parameter
May 28, 2012I want to make a GetAllContacts method which takes a sort parameter of type Func(Of Contact, TKey) which is the same type that the OrderBy method for an IEnumerable(Of Contact) takes.[code]"Too many arguments to extension method 'Public Function ElementAtOrDefault(index As Integer) As Contact' defined in 'System.Linq.Enumerable'." on the second parameter.
View 2 RepliesDerive Address Of A Function That Is Passed As An Argument?
Nov 26, 2009ok basically i've got a delegate ByVal function_to_execute As dele0 but instead of invoking it, i wish to add it to an eventhandler
Public Sub test(ByVal function_to_execute As d0)
Dim t As Timer = New Timer()
AddHandler t.Tick, AddressOf function_to_execute.address
[code].....
Function Returning An Object With Type Specified In The Argument
Mar 22, 2011How can I create a function that returns an object of a certain type, which the user of the function specify in the argument (using vb.net 2010) ?
[Code]...
The code above doesn't work, but maybe it can explain what I want to achieve. Using this feature, I want to hydrate my data transfer objects from datatable. Client will just call this function, specifying which DTO the client wants, and this function will just create that DTO and populating the properties with reflection GetType.GetProperties().