Property ReadWrite In Private And ReadOnly In Public?
Feb 23, 2009Can i have a property that is Readonly for Public but can Read/Write in Private?
View 4 RepliesCan i have a property that is Readonly for Public but can Read/Write in Private?
View 4 RepliesI have a bunch of private variables I've typed out and I want to put all of my corresponding Public ReadOnly Properties in a bunch below them.Is there some way of copying ten lines of
Private _myVar As String
and pasting in ten sets of
Public Readonly Property MyVar As String
Get
Return _myVar[code]....
I'm currently copying the whole bunch of variable declarations, Find+Replacing Private _ into Public ReadOnly Property then going line-by-line expanding the definitions and writing return statements.how to avoid all this nonsense in the future, as I'm developing on a virtual terminal server, and the input lag on my little copy/paste/type operations on the code is driving me up the wall.
I searched on the forum / Internet for the solution how a PropetryInfo object (of a Public property) can reveal if it has a Private Protected Setter ... it was all in vain .... all help I found was about how to "Set" value of a public property having a Private Setter.I would like to know if I have a PropertyInfo object of a public property, how would I know if its Setter is Non Public?
I tried, in a exception handling block, where I did a GetValue of the PropertyInfo object and then called SetValue by setting the same value back... but to my surprise it worked well and didn error out.
[Code]...
I Like .NET automatic properties, in C# it so easy to declare readonly property by declaring its set section as private like this:
public String Name{ get; private set; }
But when I tried that in VB.NET I was shocked that it is not supported as mentioned here and I have to write it as follows:
Private _Name as String
Public ReadOnly Property Name as String
Get
[Code].....
What the difference between these declarations in VB.NET, which one is preferred and Why?
Which one will affect compile time, runtime or performance at all?
How does one implement something as Public ReadOnly Property within a class.
CODE:
I have created a class called clsLogIn [code]Now I am on a different form, frmSchedule, and I want to get the ProviderNum property from clsLogin into a text box.
View 10 RepliesArgument not specified for parameter 'index' of 'public readonly default property chars(index as integer)as char'. Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
One of my ASP.NET websites makes use of the CultureInfo class to format currency values and normally this works fine. However, some new code is causing some unexpected problems. In the code sample shown below, txtBox1 correctly displays £99.00 while the line that specifies a value for txtBox2 generates the following error,Too many arguments to 'Public ReadOnly Default Property Chars(index As Integer) As Char'.The key difference in the txtBox2 value is that it is derived from a SQL Server database reference using Linq-to-SQL (CurrentUKFees.Print1). The relevant database value is the integer 8 and I was expecting txtBox2 to show £8.00. If I delete the CultureInfo code then txtBox2 correctly shows the value '8' without any currency formatting.[code]
View 1 RepliesIs it possible to set a variable in my custom class for Private Read/Write access and Public Readonly access without creating Properties with Get and Set? In other words, from within my class I want full access and from my form I only want read access. Right now I declare my variable as either Private or Public to control Public read/write access. I tried googling my question a bit but I'm not sure what the correct terms even ar
View 5 Repliesis there a way to have the Get part of a property available as public, but keep the set as private?Otherwise I am thinking I need two properties or a property and a method, just figured this would be cleaner.
View 3 RepliesI just stumbled over this in some C# code...:public Foo Foo { get; private set; }
View 2 RepliesI was using a data bound combo box pretty well before, now on my new project i get this error:
Public ReadOnly Property DataConnectionString() As String
[code]...
Configuration system failed to initialize System.Configuration.ConfigurationErrorsException was unhandled
This is in Settings.Designer.vb I'm using VB2010
Error1 Too many arguments to 'Public ReadOnly Default Property Chars(index As Integer) As Char'.K:\VB\Chap06\SumOddEven Solution\SumOddEven Project\Main Form.vb2645SumOddEven Project
Private Sub calcButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles calcButton.Click
Const prompt As String = "please enter even and odd numbers click cancel to end"
Const Title As String = "odd & even Number"
[code]....
I am trying to use the right function in VS 2008. I am simply trying to get the right 5 characters of a string.
VendorID = Right(cboVendors.Text, 5)
I am getting an error when I type that:
Error1'Public ReadOnly Property Right() As Integer' has no parameters and its return type cannot be indexed.
i get this error?
' Create the order and store the order ID
Line 175: Dim orderId As String = ShoppingCartAccess.CreateCommerceLibOrder(shippingId, taxId)
[code].....
I have a class like this
Public Class Settings
Private _app_folder As String = ""
Public Property AppFolder() As String
[Code]...
But how can I edit "_settings.AppFolder" property to "readonly" ?
i get the following error in the follwoing code , the word right is underlined in blue and the error is "1'Public ReadOnly Property Right() As Integer' has no parameters and its return type cannot be indexed."
Declare Function GetHDDSerialId Lib "HardDiskInfoV1.dll" () As String
Declare Function LoadLibrary Lib "kernel32" Alias "LoadLibraryA" (ByVal lpLibFileName As String) As Long
Public Function SetHardDiskID() As String
[code]....
why by the way i got this code of some one else , i am trying to read my HDD Serial number but i don't know how i need the code to read it in vb 2008.
lI think I almost have this done but I get and error "'Public ReadOnly Property Right As Integer' has no parameters and its return type cannot be indexed." here is the line causing the error:
[Code]...
I am using a PropertyGrid control to edit my class properties and I am trying to set certain properties read-only depending on other property settings.This is the code of my class:
Imports System.ComponentModel
Imports System.Reflection
Public Class PropertyClass[code].....
This is the code I am using to edit the values:
Dim c As New PropertyClass
PropertyGrid1.SelectedObject = c
The problem is that when I set SomeProperty to True, nothing happens and when I then set it to False again it sets all properties Read-Only.
explain me the difference between them? I'm new to visual basic, and I need to know the very basic things in Visual Basic allowing me to become a professional User
View 8 RepliesIs there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface
'the interface only say that implementers must provide a value for reading
ReadOnly Property PublicProperty As String
End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty
Get
Return _myProperty
[code]....
Conceptually it seems like a derived class should be able to override a readonly property with a read write property. Why isn't this possible?
[code]...
I have a public readonly variable in a module, but when I try to set it in my form load event for the first time I get 'ReadOnly' variable cannot be the target of an assignment. It is my understanding that a ReadOnly variable can only be set once and after that you would get an error when setting it.
View 2 RepliesHow to generate public private key VB.net code...
View 1 RepliesI'm new to C#.Till this moment I used to make every global variable - public static.All my methods are public static so I can access them from other classes. I read on SO that the less public static methods I have,the better.So I rewrote my applications by putting all the code in one class - the form class.Now all my methods are private and there's no static method.
My question: What should I do,keeping everything in the form class is dump in my opinion. When should I use public,when private and when static private/public? I get the public methods as a 'cons' ,because they can be decompiled,but I doubt that.My public methods can be decompiled too.What is so 'private' in a private method? EDIT: I'm not asking how to prevent my program to be decompiled,I'm asking whether I should use static,private and public.And also : Is there are problem in putting all the code in the form class so I dont have to use public methods?
It is possible convert a private / public rsa key from a .pem file in vb.net ? to xml file.
View 1 Repliesbasically how do I make my dataset public so I can access it on another form.
Dim ds As New DataSet("Dataset1")
Dim filePath As String
OpenFileDialog1.ShowDialog()
filePath = OpenFileDialog1.FileName
ds.ReadXmlSchema(filePath)
[Code]...
I am a little new to .NET Developing, and have learned a great deal recently, but I'm stuck with something. I come from an ASP Background, I'm trying to subtract 2 variables, but they don't seem to 'see' one another.
[Code]...
Private Sub ActivateMe(ByVal active As Boolean) Implements IGraphicControl .ActivateMe compiles.How is possible in VB.NET? A private method can be an interface implementation. VB.NET... a lot of compliments to this language and IDE..
View 6 RepliesI have a public variable which seems to be going out of scope. I am confused as it has been dimensioned as a public variable: Public xlCell as As Microsoft.Office.Interop.Excel.Range
I originally had all my code in the same module in the same project and it was wrapped within a For/Next Loop (Example 1). I decided to clean up my code and make it more modular (Example 2). All the code is still in the same module in the same project.
Upon doing so, my public variable is not recognized in any of the private subs that I have created. I keep getting the following error: Message="Object reference not set to an instance of an object." When I test the variable using ?IsNothing(xlCell) in the Main Sub I get False in the main sub. this tells me te variable is recognized. However as soon as the Call SelectCaseSub() is triggered, I get a True value for ?IsNothing(xlCell). Why is this? Shouldn't this variable be in scope regardless?
[Code]...