I have a table in Oracle with a column userid and i have a userid column in Active Directory. based on this i want to query the Network ID and update in one of the Group in the Active Directory.
View 1 Replieshave a table in Oracle with a column userid and i have a userid column in Active Directory.based on this i want to query the Network ID and update in one of the Group in the Active Directory.
View 1 RepliesI have multiple web applications that I've built for our intranet. I wanted to allow users to not worry about logging in, so these apps pull the currently logged on user when they hit the site. I used this code for this to happen:
Dim userName As String = User.Identity.Name
CurrentUser = userName.Substring(userName.IndexOf("") + 1)
This works like a charm, no issues here. The next step is to query Active Directory for that logged in user to pull various information. How I currently have it coded, it works like a charm on the devleopment side (typical because I'm not running IIS).The problem becomes when I publish it to my IIS server (Windows Server 2008 R2 running IIS 7.5), I get error messages that point to the specific line in my code that queries Active Directory. The interesting part is these apps were working great last week. They broke after my server admin did the latest batch of Windows Updates (please note, I am running them using .Net Framework 4.0)Before I had each app setup so that Windows Authentication was Enabled, the other Authentication types were disabled. For providers, Negotiate is #1, NTLM is #2. For Advanced Settings, Extended Protection = Off, and Enable Kernel-mode authentication is checked.
[code]...
In doing this I also removed the string that was higher up in my web.config section. This did not work either (fyi, this was a great reference[url]I then tripped across this article: [url] which seemed to be a similar situation. This article eventually referenced "Double Hops", after looking into this and trying a few things, this didn't solve my issue either.Next StepI am going to try a new IIS 7.5 implementation on a different Server 2008 R2 system and essentially start from scratch, to see if the problem recreates or not.
I am trying to retrieve all the users in the Active Directory and dump into a Sql Server Table(Sql2008). I was able to search one employee at a time but could not able to search all the employees in the Active Directory. Basically i want to retrieve 1.SamAccountname and 2.Employeenumber. I am using VS2010/VB.NET/ASP.NET.
View 1 RepliesI am trying to retrieve all the users in the Active Directory and dump into a Sql Server Table(Sql2008). I was able to search one employee at a time but could not able to search all the employees in the Active Directory. Basically i want to retrieve 1.SamAccountname and 2.Employeenumber.
View 2 RepliesI'm a developer for a College we have an active directory.I need to query Active Directory with the Pc name and return it's path in the Active Directory tree.
View 3 RepliesI am trying to create a new user and set their password in AD LDS using asp.net vb. I'm binding to an instance of a directory entry, which is working fine. And I can add a user without a problem. The problem is that I can't seem to set the password when I add the user.Is this the right way to set the password
View 3 RepliesIs it possible (I'm sure it is) to validate a user's credentials against Active Directory without using Directory Services?I'm building a Browser-Based WPF application which requires users to login to and get validated via Active Directory. Since .Net 4.0 (or maybe 3.5) accessing Directory Services from an Application requires the application to be fully trusted. Since IE won't provide full trust to an application if it doesn't have the signing certificate in it's cert store, the application is refused startup permission.
If I don't use Directory Services, then I can leave the application as Partial Trust and validate my user's credentials without having to install a certificate on each user's machine.
I'm looking for the most efficient way to query an Access table from VB.Net. I think throughout the life of a run I'm going to need to query the table ~1,000,000 times. I'm using Access 2003 to hold my data. What I've been doing so far is this:
[Code]...
We have an Oracle 11g R2(UNIX) server. A directory was created on this UNIX box for the purpose of uploading/downloading CSV files.I need to access this directory, programmatically from VB.Net in order to search for a specific file (a log file more precisely) and then open it it programmatically in Notepad from my Vb.Net application. I should also be able to delete or copy it to my local drive.I am trying to find a VB.Net code sample that would allow me to implement this: Read/Write/Open files on an UNIX directory.
View 5 RepliesI need to count the number of records that match on the GIDs from the 'Directories' table (GID) and the 'ClientSubscriptions' table (DirectoryGID), and also the 'FranchiseGID' from both; as follows:
Dim iSubscriptionCount
SQLCommand = "SELECT COUNT(*) AS Counter FROM Directories.GID, ClientSubscriptons.DirectoryGID FROM Directories, ClientSubscriptons WHERE Directories.GID = ClientSubscriptons.DirectoryGID;"
[CODE]...
I need to determine whether or not to show a menu option based on the above.
Full Code: Default.asp
<!--#include virtual="/System/Startup_Admin.asp"-->
<!--#include virtual="/Admin/FranchiseAdmin/DirectorySetup/i_Directory.asp"-->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-
[CODE]....
How can I get a list of computers and their properties from Active Directory using VB.Net and Visual Studio 2008?
View 3 RepliesI having a program built in VB.Net and would like to take in the users windows name and then compatre that with a security group in AD, if they are in a certain group then redirect them to the next page otherwise block them.I have tried many ways using many different snippets of code from different forums, but cannot find a code piece of code that works?
View 6 RepliesI would like to have all properties on a user from active directory. I find some property name as :
distinguishedName, SAMAccountName, sn, givenName, TelephoneNumber, mail
If you have a list of property? As each user has an ID in AD ?
I'm having a weird problem with active directory and the display name attribute. I can create an AD account with no problems, the account shows up, I can log on as the account, everything appears to be working as intended. The problem is, our company requires that the display name be in the form of "Lastname, Firstname". Thats all fine and dandy when you create an AD account use the MMC snap-in, you type in the users name as "Lastname, Firstname" in the display name field and when the account is created, the display name shows as "Lastname, Firstname" as you would expect.
The problem I am having is this, whenever I create an AD account programmatically, I can't for the life of me get the display name to show up as "Lastname, Firstname". The displayname property is set as such, checking the AD account using the MMC snap-in shows the display name is set correctly, but when looking at the list of user accounts, the account is always displayed as the users username. The account name I am using is "Test User", see pic below.
if you try to rename the account, the field it tells you it is editing is called Full Name? I can't find a property in AD even called Full Name so I am completely confused, here is a picture of me trying to rename the programmatically created account, as you can see, the display name field is set correctly even though it doesn't display that way. And of course, after renaming the account as seen below, the display name shows up correctly as "Lastname, Firstname"Here is the code I use to create the account, just for reference.
Public Sub CreateActiveDirectoryAccount(ByVal sUserName As String, ByVal sFirstName As String, _
ByVal sLastName As String, ByVal sUserPrincipalName As String, ByVal sPassword As String, _
ByVal sHomeDrive As String, ByVal sHomeDirLocation As String, _
[code]....
i would like to be able to login on a webpage using a valid active directory username and password.user name and password are entered in textboxes. if they are correct then i would like to redirect to another page.how can this be coded.in a second task after some code is performed, log in as an administrator using code and unlock the account.i have heard that this is called impersonation. how can i perform the above?i'm using visual web developer 2008 and vb.net
View 1 RepliesIm trying to connect to AD and carry out some basic tasks for a .Net application written in VB .Net. I would like to create the application so when it loads, it automatically binds to the default AD domain that the user is logged onto. This has led me to writing the code
Dim domain As DirectoryEntry = New DirectoryEntry("LDAP://DC=domain,DC=com", Nothing, Nothing, AuthenticationTypes.Secure)
domain.RefreshCache()
But this doesnt work.
i am trying to get a list of all users in the active directory on a domain. The following code is being used but doesnt seem to work:
Public Function GetAllUsers(ByVal ldapServerName As String) As Hashtable
'To retrieve list of all LDAP users
'This function returns HashTable
[Code]....
Then i get the "find people" box pop up. So i know i have the correct LDAP but not sure why the other information is preventing it from working..
I am having some issues with the following script for adding an object to AD - The object being a user and then modifying the properties on it.
Error
Line 350:
Line 351: Dim adUsers As DirectoryEntries = dirEntry.Children
Line 352: Dim newUser As DirectoryEntry = adUsers.Add("CN=" & sUserName, "user")
Line 353:
Line 354: newUser.Properties("givenname").Add(sFirstName)
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unknown error (0x80005000)
End of Error
Partial class Add
Me.CreateAdAccount(uname.Text, pword.Text, fname.Text, sname.Text, Nothing)
Public Sub CreateAdAccount(ByVal sUserName As String, _
ByVal sPassword As String, _
ByVal sFirstName As String, ByVal sLastName As String, _
[Code] .....
I am trying to create a new user and set their password in AD LDS using asp.net vb. I'm binding to an instance of a directory entry, which is working fine. And I can add a user without a problem. The problem is that I can't seem to set the password when I add the user. Is this the right way to set the password?
Dim objADAM As DirectoryEntry = BindToInstance()
Dim objUser As DirectoryEntry = objADAM.Children.Add("CN=Jimmy", "User")
objUser.Properties("sn").Value = "lloyd"
objUser.Properties("givenName").Value = "Jimmy Smith"
objUser.Properties("userpassword").Value = "THEPASSWORD"
objUser.CommitChanges()
This is the error that I get :
System.DirectoryServices.DirectoryServicesCOMException (0x80072020): An operations error occurred. (Exception from HRESULT: 0x80072020) at System.DirectoryServices.DirectoryEntry.CommitChanges
I have a list of computers from the AD which also have IP addresses in one of the fields. The IP address does not seem to be accurate. It looks like the AD updates are not as frequent as the DHCP server.
MYCOMPUTER1 1.1.1.1
MYCOMPUTER2 2.2.2.2
MYCOMPUTER3 3.3.3.3
Is there anyway to get the IP address from VB soon after I retrieve the record from AD? Querying the DNS/DHCP server via code?
I am trying to Join the domain using VB.NET 2005. I cannot see anything I am missing but am getting an error code that hasn't proven much use. I get a return error code of 1332.[code]
View 1 RepliesUsing VB.net im after a way of serching through active directory and returning the ou a computer is currently in.
View 3 RepliesWe are developing our application using MS Visual Studio 2008 VB .Net. We have to use Active Directory Server for authenticating the user logging into the application. Does any one has code samples intergrating .Net and ADS?
View 3 RepliesWe are cunrretly developing a solution for compact framework and windows mobile 6.5. The idea is that the user have to login using custom login for on the phone before they can do anything else. Our backend is WCF, and here we have planned to implement an interface based solution where the customer can select between a variety of "AuthenticationSources" one including Active Directory.Is there any clever way to do this using built in .NET functionality, or do I still have to do it the old fashion way like:
1) Write domain, user and password in the windows mobile login form.
2) send this info using http webservice to the wcf server, where the server check for this device, which is the preferred login source. If it is ad, it will load the ADauthenticator class, peform a LDAP query against the ad selected, and simply return true or false if user passed or not, then the webservice return tru/false to the device.
3) If the return answer is true, the device will store an encrypted registry key on the device indicating to the device client that the user is logged on.
4) If the user select logout, or if the device is restarted, or loses power, the registry key is cleared on boot.is this a good enough solution? The devices are NOT considered to be members of the actual domain. And this solution should handle a solution with a database source for logins.
I am trying to create a VB.NET application which will (hopefully) reduce some time spent on some of my departments helpdesk calls. The part that I am stuck with is how to use VB.NET to remove a user from a group. The following is code that I have been playing with:
[Code]....
I am coding in .NET 2.0 as I am unsure if the server it will live on will have 3.5 installed.
I'm writing code to connect to my Active Directory server using LDAP. I can connect usingLDAP://celtestdomdc1.celtestdom.localbut I can't connect usingLDAP://celtestdomdc1.celtestdom.local/CN=Users;DC=celtestd
View 1 RepliesI needed to set the accountExpires property in the AD DirectoryEntry couldn't find a simple answer.Found some information;
[Code]...
is there anyway to retrieve and list all the attributes for an active directory user to be used for updating with using the following
de.properties.contains(propertyName)
I'm currently making my first program, its an active directory clean up tool. Right now I'm having diffculty getting it to search sub OUs that it sees, I can get it to look at one layer of the sub OUs. I just want more of a dynamic code so I don't have to keep repeating it like I did do. Also I'm not sure that I'm looking through active directory the best way.
[Code]...