i want to read data from smart card using card reader.i need vb.net code help as well as total process that mean what dll/exe will be needed and how can i determine that the card is inserted or ejected from card reader?
View 3 Replieshow can implement smart card and private key stored in smart card by using vb.net
View 1 Replieshow can implement smart card and private key stored in smart card by using vb.net
View 3 Repliesi have to develop a ticketing package for a client...and he wants to use smart cards too...i would need to develop the package on a smart device i.e. a mobile application and will have to read the card on the device itself ...i have zeroed on the instrument from motorola. and an blue tooth connected printer to print the ticket.how to read the smart card ...i have searched a lot but have not found anything good.the smart card would contain the amt. balnce in it...and after the transaction i need to again enter the balance in the smart card...
View 7 RepliesI want to detect when the smart card reader is connected to the computer. I used a loop structure/timer component but these solutions takes a lot from the processor capacity. There are other solutions?
P.S: when I connect normally the smart card reader to the computer, I don't have a letter where I can access the card reader.
[URL]
P.S 3: my code is:
Do
While rgReaderState(0).lAtrLen > 0
If BackgroundWorker2.CancellationPending
Then
[Code].....
I am trying to use a smart card reader in 2008. All I want to do is store a simple value to the card. Not really interested in forms of security.
Cannot seem to find anywhere to start on this one and am an absolute beginner. Any tips on this one would be most useful.
I am trying to use the eID SDK (for using the belgian ID-card) in VB. It's supported but I can't get it to work. I have never worked with sdk's before. I did manage to get it to work in c++ in console but I really need it in visual basic. Also the VB examples that come with the sdk are made in an older version of visual studio and when my version tries to convert them they don't work. I want to use the sdk to see when a card is inserted into the reader and to read out the data. (both i got to work in c++ console).
View 2 RepliesI have a smart card reader/writer hooked up to my serial port. i've already coded the program to give access to the serial port. How would I go about getting my Card Reader/writer recognized in my program. I basically want to click the "read button" and whatever is on the current smart card im trying to read, pop up on the screen.
View 1 RepliesI have been looking all over the net trying to find a program that can read data from a USB CCID card reader.
after several hours and several pages of useless info i thought maybe there is a way i could create a simple progeam in VB to read the data, so i started another long search for info also to no avail.
Does anyone know of anything like this or if its even posable?
I want to create an application that can detect usb card reader device and when i swipe the card it should read.The below code WORKS PERFECTLY IN VB.But when i converted it to vb.net it is showing some problem.Below is the code for that.
[Code]...
how to write in scospa compliance by EZ100 PU Smart Card Reader. [code]
View 1 RepliesI am working on writing a program that once a magnetic strip card is swiped, the number on the card is validated against a database storing information on the user. What is the best was to get the stream from the USB swipe card reader, build by Magtek, and then just pull the 9 digits I need? I have currently been using an Excel macro that searches the Excel document, but I want to get away from this system and make it more user friendly.
View 3 RepliesWe have the customers credit card number on file which we use simply to identify them when they swipe at our computer. The problem i'm running into is that when they swipe their card in the card reader (Magtek mini usb) it outputs the data as ASCII which looks something like %B followed by the credit card number in whatever textbox i have the program focused on. I'm sure i could just search the textbox for any 16 character number string and assume that is their card number, but i was just curious if there is some best practice to decript the ASCII output from the magnetic card reader.
View 1 RepliesI have a Digital Signature Cretificate card and card reader, certified by NIC certificate authority.Now I have to implement a login module for a web portal where user will be identified by DSC card.I am very biginner in smart card application field.I have many confution, which are listed below-
1. when i insert card into card reader how can i read data from card using vb.net?
2. what dll are needed for this application?
3. are there any class file which can i use?
I have got a Dell RT7D60 Keyboard which has a built in Smart-Card Reader. I have developed an application in vb.net and wondering if it is possible to allow users to log on to this application using smart card Authentication.I want to keep the authentication simple like instead of allowing user to enter username and password to open the application, i would want the application to ask for example, "Pls insert your Login-Card" and get the info from the card to authenticate the user.I have no clue for how to begin. Is it too complicated to integrate it in the .net application.
View 1 RepliesI am looking for some sample code so at the click of a button I can write/save an XML file to a smart card.
View 7 RepliesI'm trying to use certificates to sign documents. The first time that I sign, the OS prompts a dialog for user to set the PIN, but the next times it doesn't. For security reasons, I need that every time that I sign, the OS asks the PIN to the user.
This is the code:
''// create ContentInfo
Dim content As New ContentInfo(bytesContenido)
''// create a signer
[Code]....
I've implemented a program that read/write data from a Smart Card. I noted that the reading/writing operation are slow (2 or 3 seconds, nothing for me, but during which I've noted that common users ar lost!).
So, I've thought to insert a progress bar to show the duration of these operation... but I don't know how to start on using of the progress bar in vb.net!
I was in away to develop a system to check any problems installed in a smart card. Such as checking wheter applet fully configure,checking serial no and etc.
View 2 RepliesI have installed smart card reader to my pc and it works when testing time. However, i need to make a project where whenever i insert smart card on the reader,the texbox in the screen will appear the information of the card. The product of smart card or so called mifare card is ACR120S.
View 4 RepliesHow to start coding in VB.net for contactless mifare 1k smart card?
i have mifare 1k card ,pc/sc compliant and the reader is gemprox which uses T=CL protocol for communication.how to establish connection, and read ATR?
i am working on a project that uses an magnatec card reader mse-750 iam facing a problem in making the machine on read mode so i can read from it iam using vb.net?
View 3 RepliesIs it possible to capture the raw signal from a WiFi card in the same way you can capture the signal from a sound card? (I already found code for working with a sound card and for drawing spectrograms) I'm wondering because it would make a cool radio-type project. I'd prefer a solution that integerates well with .net (VB or C#).My basic goal is to capture the ambient radio waves and build a primative "telescope" of sorts. Using the built in computer hardware is just the easiest way to accomplish this. If you have any other suggestions about how to accomplish this goal in a different way please post it as an answer also.
View 1 Replieshow to read data from mifare card (ACR120S) and place the data on textbox on screen?? Jz like touch and go function. Thx...
View 4 Replies[URL] I am using the magtek Intellistripe 65 insert card reader and i want to connect the device thru my POS application developed in .NET. I have also tried the sample VB code provided by magtek. But i am not able to access the device.
View 2 RepliesDOes any one know how to connect my vb.net application to a magnetic card swipe reader?
im developing a automated payroll system w/ magnetic cards to input time in and time out of a employee
i have windows app i want to disable the sound card and enable the sound card by using command button
View 2 RepliesHow do i actually detect a card is being read by a card reader by using events handler?Like the card reader is connected to the PC using USB, and when a card is flash on the card reader, it will be detected.
View 5 RepliesFirst off, what I'm doing here is trying to read in information from a magnetic stripe card, parse it, validate certain parts and go from there. I'm working on two classes... the first is CardClass and that represents the card itself (well, the data obtained from the card). The class is CardParsingClass. This holds all the card parsing rules.
At one point in the process, I will create an instance of the CardClass. That instance gets passed into the CardParsingClass.ValidateData function:
CODE:
This function steps through each of the card parsing rules and applies the rule to cardCurrent to see if it passes (i.e., is valid).
And here we come to the meat of it.... what I'd like to do is define an event called FailedCardReadEvent. Whenever I raise the FailedCardRead event I could write to the log that it failed, modify variables in the CardClass (particularly the state of the card read variable), etc. So, the way I'm looking to use this would be something like this:
CODE:
So as shown above I'm thinking I should code a FailedCardReadEvent in the CardClass. But I don't know how to do that.
I also don't see how this is different than just calling a subroutine. If I have to manually raise the FailedCardReadEvent isn't that the same as calling a subroutine?
I know I'm missing something but I'm just not getting it. I've spent some time googling this morning and read a few things but I'm just not understanding how it all works.
I am doing my academic research on ARM MINI 2440 and "i want the code to read the data from sd card and send that data to the serial port.
View 16 Replies