I need to parse a XML sheet I retrieved before with a webbrowser control.I tried the below, however the output I get is not in the correct XML format:
Code:
Dim WithEvents Web As New WebBrowser
Web.Navigate(url)
[code]....
i'm using standard webbrowser control (visual basic 2008) and need to read "headers" of current URL requested, how can I do this?
I'm using the following code to read the xml from the url and it works nice,but how can i convert the code to read the xml from webbrowser instead of the direct url
here is the original code if i use direct link "http://xxxxx": i want to put instead webbrowser1.??
Dim doc As New XmlDocument()
doc.Load("http://xxxxxx")
Dim navigator As XPathNavigator = doc.CreateNavigator
Dim title As XPathNodeIterator = navigator.Select("/channel/item/title")
Ok, what I'm trying to do is, on the internet, when you view source, it has something like this.
id="user" value="koolazngy94"
I want to read the value of that and put inside a textbox.I tried this
TextBox2.Text = WebBrowser1.document.GetElementById("user").SetAttribute("Value")
But not quite sure.
I based a lot of my project on your Codebank submission for navigating web pages. I have ran into the problem a few times where it would stop navigating. You had recommended deleting the Interop files and rebuilding the solution. I have done this and it used to work just great afterwards (I was deleting all Interops and AxInterops in the Bin/Debug and Obj folders)I now have a strange case where it compiles and builds and navigates as expected on the computer I coded it on, but when I install it on another machine, it fails to navigate again. I made certain it worked directly before building and that I used the correct setup file but nothing I seem to do now cna make it navigate on the second machine. What else should I check?
View 7 RepliesI have a website that divided into 4 frames. I'm trying to create an application that will constantly run on my PC as a task looking for certain text in the HTML in a frame.When it finds the text it would alert the user by presenting a pop-up message. This is basically a monitoring website that checking network nodes. Instead of staring at the screen looking for critical messages I would like to be notified when there is an alert.
View 1 RepliesAfter I send a post request to a site/forum and successfully logged in,
1) How do I save/read the cookies so that when I visit other sections of the site/forum I remained logged in?
Eg. I want to login to a forum and read a thread that only forum members can read.
Also, when I log in in the web browser tool (GUI) of vb.net, the cookies seems to be saved by the browser. Those cookies are also shared by Internet Explorer browser.
2) Is there a way to get the cookies from the web browser tool or Internet Explorer so I don't have to login and read/save the cookies programmatically?
I did a search in google, through my webbrowser control, and wanted to search the html of the google search results..
View 13 RepliesI'm probably missing something really simple or trying too much at once but it's 16:30 on a Friday afternoon and my head is wrecked Basically, I'm trying to build an application that takes out put from a database query as XML and uses XSL to transform it into HTML which is then displayed in a web browser controll on another form.
I thought I break it up into pieces so I decided to just create an XML file and an XSL stylesheet and read this into the web browser control but all I'm getting is <HTML></HTML>
[Code]...
how to read HTML text box elements from the Web Browser control
View 2 Repliesim making an app that shows topics i post. i have an html file at [URL]. I'd like to take that html document and for each line of text (separated with <br>), and add them to a listbox. how can i do this?
View 1 RepliesI have a VB.Net project that creates a new Webbrowser instance which then navigates to a page in order to read the HTML into a variable ( then modify this before displaying in a visable webbrowser).The issue i have is that the webbrowser navigate just reads the page from the cache and does not read it from the server.
View 2 RepliesHow do I enable my weBrowser control to read pdf files and show flash videos? I want to also create an intepreter and compiler for the perl and php for a program without setting up a server or using my IIS server. How do I do this?
View 2 Repliesi want make a program like a login tool game..in login tool program..i put a button and WebBrowser page..then i want make a my button and WebBrowser read link or target in ini file or inf file...how to make it?
View 2 Replieshow can i make my webbrowser open up a new link in my same webbrowser or in another form? basically what im saying is i dont want it opening links in internet explorer.
View 3 RepliesI use webbrowser as File Explorer.
If you click folder it opens new folder contents in WB window but if you click html document it opens in EXTERNAL viewer.
How do you get html document to open in WB while exploring ?
I am writing a few web based apps which will require a webbrowser extension. I have already used the IE webbrowser control that uses the trident web rendering engine. I believe this is MSHTML.DLL? Anyway, some of the users of my programs have complained of a few things. Particularily,
1. It seems to be a slow browser, at least compared to other rendering engines out there (webkit and gecko are 2 known ones).
2. On the developer side, it seems to be low in features. The features are sufficient in most cases, but there are some "special" things that I need.
3. It has VERY low HTML (and especially HTML5) compliance.
My question is, how much work would it take to use a different engine (such as webkit .net, which I HAVE heard of) and be able to distribute it easily. Or, if you guys feel ambitious, we could try writing a brand new engine ourselves. I know how big of a job it is, and frankly, I have no clue where to begin. I would just like your thoughts and opinions on the matter.
I am utilizing a webbrowser control in vb.net 2005 to display excel workbooks
We are using this control to open excel documents. Webbrowser.ShowSaveAsDialog() allows the user to save the excel workbook open at any location he wants
However, I don't want the user to decide where to save. Is there any way to save an excel document from the webbrowser control without going through the ShowSaveAsDialog?
On closing of webbrowser, a simple prompt to user whether he/she would like to save changes should be fine enough
As of now, I can close webbrowser control and it does not prompt the user to save the changes. Actually, all changes are lost until and unless I perform a save (Ctrl+S) manually
i have created an app to load an access database into a datagridview, which contains web urls. When button is clicked it webbrowser1 navigates to each url and each webpages document.inertext is put into textbox. This all work fine but after a while the webbrowser navigation becomes increasingly slower.
For Each RW As DataGridViewRow In Me.DataGridView1.SelectedRows
'''''''''''#######cell values into strings ########''''''''''''''
If RW.Selected = True Then
Dim domain As String
[code]....
I want to make a webbrowser, but only have it show one specific thing and not the whole page. The thing I want it to show and only show is in about the middle. How would I frame the page, and put it on the webbrowser?
View 1 RepliesIs it possible to add tabs to a normal webbrowser without using a tabbed webbrowser ?
View 14 RepliesIve tried to edit option on the webbrowser control, example javascript enable/disable. but found out that it uses IE's option and cannot be changed.So my question is: Is there a way to do a "webbrowser" without using the WEbbrowser control that is based on internetexplorer? If it is, can i change option example flash and so on?
View 6 Repliesi have two browsers. And one browser makes some occasional popups. I want the popups to open in a new webbrowser (webbrowser2). I don't want to kill them, only to open them in the second webbrowser. Where do i start from? what code should i use? right now I can't figure out anything, i even GOOGLED the stuff.
View 4 RepliesThere are already multiple threads about this, but i don't have the knowledge about the different SQL databases/methods to make heads or tales from it.I am using an OleDbDataCommand, an OleDbDataReader and the following code
Dim Query2 As OleDb.OleDbCommand
Dim RetVal2 As OleDb.OleDbDataReader
Query2 = New OleDb.OleDbCommand("Select [section], [title], [id] From " & DtSections & " Where [volume] = " & volu & " And [chapter] = " & chapter & "", AccessConn)
[code]....
value)In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. Type) Object?
I know how to read user input using textbox but it only can read character and numbers. Is it possible that I want to read user input equation?
Example:
User type A+B
User put range of A and B.
1.25<A< 3.56
2.45<B< 9.87
I failed to read the equation using textbox. Is it there are other ways that can use to read equation input A+B?I am using VS2005 and VB.Net. I really new in this programming using VB.Net.
I;m attempting to write code to read several NMEA ports and format the data for archive. When I execute the following code:
Using Commportno As IO.Ports.SerialPort = _
My.Computer.Ports.OpenSerialPort(portName:=port)
Dim Incoming As String = Commportno.ReadLine()
I have created a program that saves the co-ordinates of the users mouse and saves it to a text file to be used as an auto clicker.
View 2 RepliesI'm using vb.net 1.1 to develop the program. I got text files that contain test result from a machine, like below.
T1 1.24535 2.56335 2.43253 1.24538 2.55619 4.35243
T2 1.42542 1.63728 3.57295 4.59275 1.57320 2.72057
T3 5.12857 2.45375 6.38593 2.58375 3.57259 3.57204
I need to check the test result with the data from database, to find out which test result is failed. If there is a fail test result, I will show an alert to the operator and stop the checking process. Until the operator close the alert, then the checking process will continue from the last read point.
I have a number of word documents I am converting. Everything is going great until I get a file that is read only. In this case I get a Save As prompt.
Is there any way to open the file in read/write format? I should have admin privileges so access isn't an issue.
I'm using VB.net to open the files. More specifically
doc = word.Documents.Open(path, Type.Missing, False, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing)
ok i have image that i bind info in it and i want to read the info now from file (FileStream) its workbut i want to do it not from file so i need to use MemoryStreamhere the example that work and how i do it now how i make it work with MemoryStream (with byte = My.Resources or PictureBox1.image)
Using FS As New IO.FileStream(image, IO.FileMode.Open)
FS.Seek(0, IO.SeekOrigin.End)
While Not FS.ReadByte = Asc("|")
[code].....