How to Add Not condition in the below select case.Is <> works for single value, and 'To' works for a Range but the value are specific values there are not series of numbers. Is it possible to use select case in this scenario, or do i have to switch to if-else. Ex: i don't want case to execute when value is 0 and 3.
View 3 Replies
My code is:
CODE:
Now i want to know can i use select case instead of if (condition)statement in this code?
Using this [URL] to retrieve both address and place name at the same time ("//span[@class='listingTitle']|//div[@class='address']/text()[normalize-space(.)]"), I can get a list of placenames and addresses like this in a richtextbox:
jh ryder machinery limited
convenience storage ltd 3344 rideau
rd, gloucester, on, k1g3n4
kitchen interiors 146 colonnade rd,
nepean, on, k2e7y1
The first line is bad, it doesnt have an address. Line 2 and 4 are good, they have addresses. So what I could do is:Check each line,if the following line doesnt contain "numbers + ON" then delete line. This will leave me with PlaceNames followed by addresses, which I will then split every other line into a new textbox, (so I have one textbox with placenames, and another with addresses).
I need a command that will select all the chars that fall on a known line of a richtextbox.
View 2 RepliesWhen my form loads it adds some handles (using AddHandler) to a sub (showStatus). What this sub does is checks which control activated the sub (using sender.Equals) and displays text in the status label (status) accordingly.For this I use an If...Then statement for each possibility. There are many possibilities and my code get cluttered. Is there a way to do the same thing with a Select...Case statement. I tried: Select Case sender Case tbOne : status.Text = "blahblahblahblahblahblah" End Selectwhere: tbOne is a textbox, status is a StatusLabelIt gives me an error though, saying "Operator '=' is not defined for types 'Object' and 'System.Windows.Forms.TextBox'."Any ideas on how I can get this to work with a select case statement?
View 13 Replieshere is my code..
[Code]....
If the result is 86 and it's mod by 43 the answer is 2 Case 2 is not firing. it just goes to the end of the procedure.
i have a program using a select case to convert letters to special charaters. My question is how can I get the code to read upper and lower case letters without having to put the upper case letters in my select case statement. Example: Part of my code is
[Code]...
ive got a form containing treeview on the left docked, and two panels one over the other (just as for practice), so i am using treeview to select one from the other the code contains the Case select,
If
Not e.Node
Is
Nothing
[code]....
The problem is , both panels are not visible, when i select the first node the firstpanel is visible then i select the second node both panels are not visible, i return to the first node the first panel is visible.
So I have case statements grouped together here, but I have a few case statements that need extra decision based on a second variable after the original case is confirmed. [code] And then just have 3 case statements instead of one but the code wouldn't look ugly. By the way Condition is declared instead the same select.Is there any reason why I shouldn't use this if it does work?
View 3 RepliesThe following lines are supposed to display to a text box the phones numbers that match the condition in the sql statement, however it shows me all the phone numbers:[code]
View 7 Repliesi have datagridview with rows in it and one of the col show type of product. there are row with same type. on click of button i want to select all the row where productype = 1 (for example)
do i have to go thru each row in grid and check the condition for product type and then select it or there is another quick method.
[code]I don't get any error messages, but the DoSomething() line is never executed. I guess this isn't possible.
View 7 RepliesI'm working on a routine that requires a significant amount of nested and daisy-chained logic. Using If-Then-Else, each logic construct would run 8-15 lines of code (quite readable) while using Select Case each construct doubles that (even with significant commentation, it gets less and less readable with each new Case).
I've read many times in this forum how Select Case is leaps and bounds ahead of If-Then-Else in runtime performance, although I can't recall any discussion of the underlying process(es) that make it so. I've also not had any luck finding good, detailed documentation on the nuts and bolts under each logic construct. What I'm working on, if the performance leap is legit, needs the performance more than the readability but if the performance is marginal then the readability is going to get the priority. how and why Select Case is supposed to process so much faster than If-Then-Else. Links to good white paper would be really nice too.
I have a macro that uses "If Then" to choose what macro to run based on the ActiveCell. I would like to use the Select Case method instead. How would I change this code?
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Application.DisplayAlerts = False
Application.ScreenUpdating = False
[Code].....
Question is, I basically wrote a Rock Paper Scissors game in VB.NET using If statements and wondered how exactly I would try and work this into a Select Case instead.Professor was pretty awful at teaching things and didn't let us know until today that it had to be Select Case(its due tomorrow
View 2 RepliesConverting an IF THAN ELSE into a select case
View 4 RepliesI am convertng vb.net to c# 2010 as my job, and none of the automatic tools I have can succeed completely. In special example, this case:
[Code]...
I am mostly java developer before this, so not great with c# and none with vb.net. I do not understand the "oaaaa to" part and this part is not converting. Can you please point me to right place to find the c# version of this?
I have an if-elseif-then setup as below:
Private Sub CommandButton1_Click()
If OptionButton1.Value = True Then
getdate
Unload glpmenu
[Code] .....
I would like to change to Select Case.
i think this is the right place to post this.so i am doing my First Vb project and have run into some problems
[Code]...
I am using visual basic in VS 2008 and trying to learn how to assign a value to a word in a combo box using case select, this is my first attempt at programing and i just can't work out what to do next. So far i have two combo boxes a label and a button, i want the word, first to = 11, second = 9, third =7, fourth = 5. All it is doing at the moment is adding the list index value and displaying that total in the label. I want it to display for eg: if (first=11) and (second=9) are selected a total of 20 in the label,and so on for what ever combination is selected.
[Code]...
I have assigned nodes in my treeview keys depending on what they are to do with and now i would like to use a select case to choose the right calculation depending on which node is selected.i have tried selecting the key like this:
Select Case tvwFCOM.Nodes.IndexOfKey(tvwFCOM.SelectedNode.Text)
Case Is = "assi06"
Call MinimumSpeeds()
but option strict on dissalows conversion from string to integer. there are more cases, but i have only shown one here. How can i code so that the key is selected from the selected node?
I had to change the given code from If Then to Select Case, and this is what I came up with. But when I run the program, it does not work and gives me zeroes instead of the correct information.
Public Class MovieInfo
Private wkndBox, screens As Integer
Private title As String
[Code].....
I just replaced a different segment of code with the select case statement and it works fine. However I don't understand what the dim is for after you do "Select case [variable name here]"
I currently just dimmed a value as nothing. I didn't specify any data type for my variable I'm using for this case statement. But it works.[code]...
Enum age
Over18
Under18
End enum
[code]....
'age' is a type and cannot be used as an expression.Is there any way of using enums in "select case"?
I am in my programming class and we had a small program to make that would check to see if an value that was entered is a integer and convert it to a Roman numeral. I know how to properly do it by putting the TryParse into the If...Then statement. What I am trying to do is to not use an If...Then statement and go just by a Case Selection statement. If it is not possible then that is cool with me, I am just trying to think outside the box. Here is what i have done with it:
[code]....
When you do say "Case 1" it says it needs to be "Case CBool(1)." Using either "Case CBool(1)" or "Case 1 = 1" provides the same result .However the code shows no errors it doesn't do the conversion, it always displays the label's value as "I"
I have a question regarding a null value which I am not supposed to get in VB. Here is my code.
Public Class SelectDemo
Private Sub lstData_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstData.SelectedIndexChanged
[code].....
i need to make a statement that checks the remainder of a number divided by 4.[code]can i get this in SELECT CASE ..MOD format please
View 1 RepliesSelect Case currentNodeName
Case "string1","string2","string3","stringEtc"
Case Else
[Code]....
The above is a code snippet... of course I've already made my declarations earlier in the code. My issue is I get the error " 'Select Case' must end with a matching 'End Select'." It looks to me like VB is not liking my If statement with the "Next For" in the middle. I'm sure this is a basic syntax issue.
I have say 4 asp.net radiobuttons which are grouped, I want to find out which one is checked.
What seems natural to do is:
Select Case RadioButton.Checked = True
Case myRadioButton1
Case myRadioButton2
Case myRadioButton3
Case Else
End Select
I just get a 'reference to a non-shared member reference' error. It's a shame because it seems such a clean way to do this test.. Is it possible??
I made an application that calculates course grades. The program runs perfectly except for the last part
The the final grade number comes from the label "lblCoursePts" and i want to put the letter grade in the label "lblFInalGrade" Here is what i have.
'Determine the final letter grade
Select Case lblCoursePts.Text
Case 90 To 100 : lblFinalGrade.Text = "A"
[Code]....
