I'm using vb.net 2005 and trying to get a old vb 6 app upgraded that uses sendKeys. I'm using:
SendKeys.SendWait("%{TAB}")
which should be the proper text for Alt+Tab, anyone else having a similar problem or know of another way to get this to work?
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
CheckBox1.Checked = True
While CheckBox1.Checked = True
SendKeys("{END}")
End While
End Sub
That is the code, the error is "SendKeys is a type and cannot be used as an expression."
So I have a form with a textbox1 thats supposed to enter in a set of keywords and then ebay will give you the"Instant suggestions" in return, but when I have my textbox1.text send the text over to the ebay form, ebay will not return any suggestions, unless I use the sendkeys.send method. Well, I do not like the sendkeys.send method because it's way too buggy &only works under the right conditions.Here's a pic of google instant and ebay does the same thing. So here's what I'm trying to get ebay to do:Here's the code that I have:
Dim theElementCollection As HtmlElementCollection = WebBrowser1.Document.GetElementsByTagName("input")
For Each curElement As HtmlElement In theElementCollection
[code].....
I write a program designed for interacting with an Android phone that is hooked up to a Windows machine. One of the tools in my program is a utility designed to help the user root their phone.Now in order to root it goes through a command line utility called adb which lets you access a terminal on the phone. It must then type commands in that terminal. Most processes that this program does can be done through a batch file, however rooting the phone isn't one of them. The reason being once it actually logs in to the phone's shell, it stops running commands because it just gets stuck on that line, waiting for it to finish. So despite being a little primitive I designed that part of my application to use sendkeys. So the way it should work is:
1) It launches powershell as an adminstrator
2) Types the following commands (I have abbreviated the number of commands it types for the sake of this board. There's actually about 20 lines total): [code]
For the people that have this happen to them, it's always the exact same thing. It's like it completely skips all letters until it gets to a special character. I have no clue what could be causing this. The only thing I have found was that sendkeys wasn't totally supported but that running it as administrator would fix that, which is why I now have it run as admin. But that didn't help. I also had some success by using powershell instead of cmd, but it's still failing for a small number of people.Any ideas what would be causing this? Every other part of the program works perfect except for this. I haven't found any common element between the people that it is failing on. They aren't running the same anti-virus or the same programs. I program and debug on Windows 7 64 bit, yet someone else can run it on the same OS and it won't type it out properly.
I have an application that I want to load using the scheduler in windows. I am also wanting the "enter" key pressed when the app loads. Because you cannot use a batch file I tried using a vb app. It works great on two different windows 7 machines but not at all on the xp machines. The xp machines load the app but don't follow through with the sendkey.
Sidenote - I had to repeat the sendkey function in order to get this to work because I am not sure how to use the sendkeys.sendwait function. I tried and it never worked.
Dim ProcID As Integer
ProcID = Shell("C:Program FilesAdobeFlash Media Live Encoder 3.1FlashMediaLiveEncoder.exe")
[Code].....
Well to simplify it, whenever I use sendkeys from a background thread it just doesn't work. I even created a textbox, button, and backgroundworker with the following code:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code].....
VB 2008 Express. I write a program designed for interacting with an Android phone that is hooked up to a Windows machine. One of the tools in my program is a utility designed to assist the user root their phone. Now in order to root it goes through a command line utility called adb which lets you access a terminal on the phone. It must then type commands in that terminal. Most processes that this program does can be done through a batch file, however rooting the phone isn't one of them. The reason being once it actually logs in to the phone's shell, it stops running commands because it just gets stuck on that line, waiting for it to finish.
So despite being a little primitive I designed that part of my application to use sendkeys. So the way it should work is:
1) It launches powershell as an administrator
2) Types the following commands (I have abbreviated the number of commands it types for the sake of this board. There's actually about 20 lines total):
SendKeys.SendWait("mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system{ENTER}")
SendKeys.SendWait("cat /system/bin/sh > /system/bin/su{ENTER}")
SendKeys.SendWait("chmod 4755 /system/bin/su{ENTER}")
SendKeys.SendWait("flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img{ENTER}")
Now it seems that for 90% of users, this works perfectly fine. However for a small group of people, this is what actually gets typed in to the powershell window:
> /system/bin/su{ENTER}
_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img{ENTER}
For the people that have this happen to them, it's always the exact same thing. It's like it completely skips all letters until it gets to a special character. I have no clue what could be causing this. The only thing I have found was that sendkeys wasn't totally supported but that running it as administrator would fix that, which is why I now have it run as admin. But that didn't work. I also had some success by using powershell instead of cmd, but it's still failing for a small number of people.
Every other part of the program works perfect except for this. I haven't found any common element between the people that it is failing on. They aren't running the same anti-virus or the same programs. I program and debug on Windows 7 64 bit, yet someone else can run it on the same OS and it won't type it out properly. Is there something better that I could be using instead of sendkeys?
i've been looking for a solutions/alternatives to use sendkeys in Vista after reading many threads about the issue, i did see posts of alternatives, there was mentioning that SendKeys does work in Vista with .Net v3.x Framwork. (thread :"[RESOLVED] cant use the sendkeys function in vista " post # 14 ,with the following link
[Code]...
so before i download and install .Net v3.5 Framework (because the computer i am using is not mine, borrowed it from a freind)i wanted to ask , can anyone confirm that this is true,if i will install .Net v3.5 Framework on windows Vista then the SendKeys command will work as usual (as on windows XP)??p.s. here is a link explaining how to know which version of .Net framework is installed on the computer[URL]..
I have tried to control another application to automate a process we do 100 times a day. It is simple enough, a few key strokes is all but I have been foiled in all attempts
View 1 RepliesWhat is the difference between SendKeys.SendWait and SendKeys.Send?Send obviously will just send they key immediately, but does SendWait actually wait for the message to be processed or does it also send it immediately?The function's name itself is just confusing. Which one should I use if I want to send keystrokes to a 3rd party app immediately, or is there no difference? To me, a few milliseconds is a big difference.
View 3 RepliesI'm looking for the underlying Win32 API call that the DotNET Framework invokes on a SendKeys.Send or .SendWait call, or a Win32 API Equivalent to SendKeys. I've already experimented with SetKeyboardState which seems like the way to go, except that it does not raise any kind of keyboard event that causes the set keystates to register with an active application or the OS (at least not until another key is pressed; for example I can meddle with the keyboardstate before events process on a natural keystroke, but I can't invoke a keystroke programmatically).
View 1 RepliesI have a VB.Net 2.0 application, on my form I am using a Component ONE PDF reader control.I am trying to send to this control a F4 keystoke to close the navigation panel when it opens the PDF file. It is not working or not accepting the sendkey.I put focus on the control first. Code below:
Me.PDF1.Focus()
Me.PDF1.Select()
My.Computer.Keyboard.SendKeys("{F4}", True)
I have tried different variations of the Sendkeys with no success.
When using Sendkeys with vb.net, is it possible to tell if the target of the Sendkeys has changed between sendings?
View 1 RepliesI Need to send an Alt Gr + M command to a process but cannot find the option for the right alt key.... Is there one?
(Or an alternative method of sending an Alt Gr?)
I have an WPF full screen application and I configured Skype´s "Focus Skype" Hotkey to Ctrl+F6 combination.
How can I send this message to windows (Ctrl+F6)? I tried by sendkeys but is not working, it says that: SendKeys cannot run inside this application because the application is not handling Windows messages. Either change the application to handle messages, or use the SendKeys.SendWait method."
I tried Sendkeys.sendwait method but it minimized my full screen application and I need it remains full screen.
In vb.net I want to do a sendkeys for the down arrow.
View 2 RepliesCurrently, the sendkeys command is too fast for a game called "Minecraft" to process. Here is the code I got currently:
for the button:
appactive("Minecraft")
timer1.enabled
[code].....
So I've been doing a lot of reading today and apparently SendKeys isn't very reliable anymore.Does anyone know of another alternative to it for what I need:
The application works by the form being positioned over a open window, notepad, word, excel etc and it then determines what it is over, notepad, word, excel etc and then reads the file, and does some processing using SendKeys at the moment.Though I do believe I could probably change the later at some point. The problem I'm having right now is when I try to send the Alt + Tab to change focus it's working roughly 12% of the time.If you are wondering I ran it 50 times and it worked 6 of those,thus the 12%.I'm thinking that is rather unacceptable.This is what I'm using which should work: SendKeys.SendWait("%{TAB}")
XP Service Pack 3 and vb.net 2005
I'm trying to send Ctrl+A to Notepad but nothing is happening. Code for the button:
[Code]...
I am currently using this code:
[Code]...
What this code does is send the keys "abc" to a process called Halo.exe. The problem is that sometimes the keys don't send and I need to add a sleep command before the keys are sent. How can I make my app always send the keys and make it so I dont have to use a sleep command.Don't Be Scared To Ask,
First off, using VB2010. I'm in the process of upgrading some applications from VB6 to 2010 and haveing a great time of it. The current application I'm working on is using Sendkeys of which I have changed over to the WSH.Sendkeys of which is pretty decent. Basically the program is copy and pasting the current open file, reading some data and saving it as a different file type. It also has to change xls files to csv and then saving it to the format as well as a smiliar thing with word. Thus the reason for the copy and paste as it's changing the extension to a dot date (for example, test.830).This is the flow of how it works for a text file (most basic)
1. changes focus to notepad
2. Select all Copy to ClipBoard
3. Open Programmers File Editor and a blank file
4. Paste in text
5. Save as code.date extension to the directory
Excel files obviously have a few extra steps.
I've been developing applications in VB 6 for many years. For a long while now I've not been developing and I switched over to Windows 7. Now I've been asked to build a trainer so I moved over to VB.net 2010 and I'm struggling to make the transition. Anyhow I'm stuck with this trainer.I've been asked by many players of an online game to create an application that serves as a trainer for leveling up characters. I've been personally approached by some of the guilds also. This is an MMORPG so instead of running around for hours, the trainer simulates the keyboard key 1 being pressed which is the attack button. So the character attacks monsters automatically until you stop the trainer. In this way you can leave the game running in the background and do other work.This small project has got me really excited in working in vb 2010 and to me it's a small kick start. I haven't done anything like this is Vb6, it was more database orientated and educational game software I was developing. So I'm clueless in this area.
It doesn't really work. If I activate the ingame chatbox it returns 1 and 49 respectively into the text area but doesn't activate the "attack" command even if the chatbox is deactivated. I'm guessing it's not sending the keyboard press event but instead sending a string?
Im trying to use SendKeys to an invisible cmd(that i open in the program), but I can not get it to work. it just sends the text to the program that is active. is there any way to send a specific program I'm using Visual Basic Express editor 2008th
View 15 RepliesI'm trying to send some words to an application I'm running (exe file, no webpage). To do this I run my vb program and minimize it, so that the application I want to send the words to have focus.Now I've tried sendkeys, but it seems sendkeys only sends my first word and does nothing with the other words. The code below is called 4 times by the main form
If i > 3 Then i = 0
i = i + 1
If i = 1 Then verhaal ="some text 1"[code]....
but this throws in a overflowexception was unhandled error at the apiSendMessage(hWnd, WM_SETTEXT, 0, "Hello") line.I've tried several things but I can't figure it out how to send multiple words to the application without problems .
I was looking for something send keystrokes and I found this helpful routine SendKeys that I can use in a VB Script. I wanted to have "Right Control Key + (Scroll Lock & Scroll Lock)" sent to the machine. Essentially, having the Right Control Key pressed, I need Scroll Lock pressed twice. Here is what I tried:
set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.SendKeys"^({SCROLLLOCK}{SCROLLLOCK})"
I am trying to emulate the press of any of the arrow keys using the sendkeys class, I know that enter would be
Code:
SendKeys.Send("{Enter}")
But what is used for the arrow keys,
Code:
'right
[Code].....
Ex: Alt button + i button.
View 2 RepliesHow would I use sendkeys to sendkeys to another app?
View 5 RepliesDim NotePadProcess As Process = New Process()
NotePadProcess .StartInfo.FileName = "notepad"
NotePadProcess .StartInfo.WindowStyle = ProcessWindowStyle.Normal
[Code].....
I am trying to send some keys to a program that I launched, but every time i send the keys focus is not on the program and the keys are sent to the wrong program. Is there a better way to send keys to a program or a way to set focus on a certain program?
I'm making an auto typer that has multiple textboxes from different forms to send and it looks like this[code]...
View 4 Replies