Is there a way to set the selected tab of a tabControl without the selectedIndexchanged event firing? e.g. Here the event fires when selecting myTabPage2 because myTabPage1 is the default:
[Code]...
Asp.Net 2.0 framewrok - VB.Net application I have a UserControl containing a Asp.Net DropDownList.
Things already researched and or tried:
The control gets bound to data on page load inside if not Page.IsPostBack (only loads once) ID proprety is set for control (ID = ddlMyControl) AutoPostBack is set to true EnableViewState on the control is set to true AutoEventWireUp in the UserControl declaration is set to true EnableEventValidation is set to false in the parent page
The control will not fire it's SelectedIndexChanged event no matter what I do.
I am using VS2008, vb.net, Windows forms project.I have a combo box control on a tab control.The selected value of the combo box is bound to a binding source.The data source of the binding source is a typed dataset.I set the datasource of the binding source when a record is chosen in a data grid control.Since the combo box is bound to the binding source, this should set the selected value of the combo box, and fire the initial SelectedIndexChanged event.Therefore, I remove the SelectedIndexChanged event handler for the combo box before I set the datasource of the binding source, and add the handler again after the datasource is set.
View 2 Replies.net 4.0, ASP.net, vb.net. I've got a usercontrol that is using an obout combo box. The obout is a cascading combobox that has 3 levels to it. when something it selected from the third level of the combobox, it is suppose to fire off a selectedIndexChanged event. This happens the first time that I select the usercontrol. The problem is if i want to go back and select something different. The selectedIndexChanged doesn't fire. I've set breakpoints and the AddHandler ComboBox3.SelectedIndexChanged, AddressOf ComboBox3_SelectedIndexChanged
runs just like it did the first time i select the usercontrol. But the selectedIndex just doesn't fire the second go around. Was wondering what i'm doing wrong. Here is the selectedIndexChanged that is not firing
[Code]...
I have been looking for a solution to this for a while though and seen many posts that show me how to do it but yet I cannot get my SelectedIndex Changed event to fire when the DropDownList is changed.The DropDownList AutoPostBack is set to True,[code]
View 2 RepliesI am trying to programmatically add an unspecified amount of new UserControls to a form. One will be added every time an entry is selected in a ComboBox contained within the UserControl. Problem is, the SelectedIndexChanged event fires completely erratically. Sometimes twice, sometimes 3 times, etc., but never just once. No matter how many times I set the combobox's SelectedIndex to -1, it fires at least once with a SelectedIndex of 0. Sometimes the Itemselected event fires multiple times inbetween SelectedIndexChanged events.
InvoiceEntry.vb snippet:
Public Event ItemSelected As EventHandler
Private Sub cboItem_SelectedIndexChanged(sender As System.Object, _
e As System.EventArgs) Handles cboItem.SelectedIndexChanged
RaiseEvent ItemSelected(Me, EventArgs.Empty)
End Sub
[Code] .....
I have a TabControl in an application that started behaving strangely. this program was converted from VB6 to VB .NET 2008, and used to refer to forms using their class names. In other words, I might have a form class called frmFoo. In the code for the program you might see:
[Code]...
I opened the program and read a file. This file contained a value that should have triggered the event handler. Without making the control visible, I can change the SelectedIndex property of the tab control without the event firing.I closed the program down again, and reopened it. This time, selected the parent tab that allowed the child tab (the one whose event I'm concerned with) to become visible. I then selected a different tab in the parent control, meaning that the child control was no longer visible. When I opened the same file as before, it fired the event.
I'm tempted to implement a flag that confirms that the control has been repainted or whether the parent tab has been displayed. I may have to fire the event in code if the flag isn't set. I want to reiterate that everything worked when the program referred to the forms by their class names and much of the arrangement of controls on the forms was done in the load event. Now the program creates variables and the arrangement of the controls is done in the form's constructor. I'm sure this has something to do with the problem I'm having, but I can't understand how.
I am using VB 2010 express edition, using windows form, i set my access database using the database connection wizard, and then use a combobox and bind it to the database using the properties windows, while other fields of database (set in textbox form), i drag it to my form. Running it, the values of textboxes are correct when i changed the value of my combobox. I want to use these values in textbox in drawing circle, whenever i change the value of combobox, the circle will also change using the combobox selectedIndexchanged event, my problem is, the value in textbox does not update in order to draw the circle, i have to use lostfocus or leave event to correct it. I make also a combobox and textbox not using this Ado.net(correct me if im wrong), it is working using the selectedindexchanged event only, what seems be my problem,
View 1 RepliesOn a form I have a DataGridView. Inside this DataGridView i have several columns of which one is combobox and the others are textboxes.The combobox column is populated with values from a MySql database table using a query. So far so good. What i want next is to populate a certain textbox from that DataGridView, automatically after a value from the combobox is selected. When a value is selected from the dropdown list of the combobox, that value is used in a SQL query to find the value that will be displayed in the textbox.All the textboxes and the combobox are inside the DataGridView!)I did this using DataGridView EditingControlShowing event because a DataGridViewComboBoxCell does not have aSelectedIndexChanged event.The value is displayed correctly in the textbox, but the problem is that the value selected from the combobox disappears after the selection, and the combobox remains empty. I need the value to remain in the combobox after it was selected and after the corresponding value was inserted in the textbox!Here is the code for this:
Code:
Private Sub test_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Populating the combobox
[code]....
I have combo box selectedIndexChanged events going on but I cant figure out how to get the value out of them so that when i hit the btn_ProjSal that the new salaries show up in the 3 labels. Here is my code. Doing it straight from the selectedIndexChanged event this works..but to get the button to pull the new values from each of those events is my issue.
Public Class Form1
Dim _emp101Sal As Decimal = 10000.0
Dim _emp102Sal As Decimal = 11500.0
[code]....
I have added the AutoPostBack = "true" attribute to the drop down list. It doesn't work.
<asp:DropDownList CssClass="dropDownList" ID="ddlBusinessUnit"
AutoPostBack="true" runat="server" Width="250px"
OnSelectedIndexChanged="ddlBusinessUnit_SelectedIndexChanged">
[Code].....
How can I ensure that the event method is called?
I have a ListView that populates some fields whenever the user selects an item. However, if they change the data in the fields and then select a new item without saving, I want to display a message box that warns that their changes will be lost, and asks them to confirm whether to continue. Sounds simple.
Unfortunately, the ListView's SelectedIndexChanged event cannot be cancelled, and it's actually called for each change in the selection. So, for example, if item 1 is selected and the user then selects item 2, the event is called twice: once to remove the selection of item 1, and then to add the selection of item 2. If you go from having one item selected to having five (for example), the event fires to remove your original selection, and then again for each of your new selections - six hits in all.
Obviously, this makes it a bugger to determine when the event should be cancelled and reset back to the original. I obviously don't want my message box appearing six times....
I have a ComboBox that contain ProductIDs and a DataGridView that lists Categories which a product can be a member of. My DataGridView list ALL categories, however, it has a checkbox column that get checked when the ProductID is a member of that Category, otherwise it is unchecked. A user may also check or uncheck a category checkbox then save.
The problem is, if a user forgot to save before changing the ComboBox, then his changes on the previous ProductID is gone How can I give the user a chance to either save or ignore the changes done on the previous ProductID (before selecting a new ProductID)?I searched the internet for an answer and I found the following code but it is in C# and I am not sure if it solves the problem or not!
[Code]...
Can we stop the SelectedIndexChanged Event of combobox at runtime? bcoz when i go to last record my sencond combo is refreshed & It will show 1st Item. but i want to see related item with 1st combo.In the database records are stored with related item.but on frontend..
Amother question is, I want to work with Datagridcombobox. My datagrid contains 3 comboboxes. When i clicked on 1st ,2nd combo should be filled. Same like 2nd third. How can we handle the event of DatagridCombobox??
I have a GridView which you can click on a row and it should call the SelectedIndexChanged method (which updates another part of the page based on which row was selected). I have done something similar to this before and it worked, but I can't seem to get the SelectedIndexChanged part to be called for some reason.The page is held in a master page which has a form runat="server" tag, and an <asp:ScriptManager> tagI am using e.Row. Attributes.Add("onclick", ClientScript.GetPostBackClientHyperlink(Me.gridMessages, "Select$" & e.Row.RowIndex)) to allow the SelectedIndexChanged to fire by clicking anywhere on the row.To check that the code does work apart from that, I added a CommandField with a SelectButton and that successfully fires, but i would prefer to find a solution without having to use that.[code]
View 1 RepliesI am trying to put an extra event in, UpdateID and it's not firing.
[Code]...
Let's say I have a DropDownList of product categories and a ListView of products based on the category selection in the DropDownList. When a user visits the page, there is a possibility of conconrency issue as new product belonging to a new category may be added to the inventory as the user is browsing.When the user selects a different category to view(a SelectedIndexChanged event) and causes a postback, I want the DropDownList to update the list of categories to include the new category being concurrently added and at the same time still able to make a change of selected index.
View 4 RepliesI'm trying to show message "Loading..." when a user select an item in the dorp down list.
Mark up:
<asp:Label ID="lbl_LoadingMessage" runat="server" ></asp:Label>
<asp:DropDownList ID="ddl_Chapter" runat="server" AutoPostBack="True">
</asp:DropDownList>
[Code]....
The method I'm using above is not working. When I select a new item from the drop down list, it works as expected except the message "Loading..." is not showing at all.
I am using visual studio 2005. i am using webBrowser control to automate third party website.My problem is SelectedIndexChanged event is not getting fired. I used the code.[code]This code is changing the value in combo box but it is not firing the selectedindexchanged event. If i manualy select the item then after selecting a item it shows different message. How should i do it programatically.
View 5 Repliessend me sample code for SelectedIndexChanged event for Combobox , whn i change value in Combobox through SelectedIndexChanged event then data should be change in Other Combobox and Textbox.B`se i am tring a lot for this but last i am not able to get.In load Event i bind the data in Combobox control .
If All controls bind the same table then how can do code?? and if controls bind different tables then how can do code??
I am using a monthcalendar inside of a panel. when the user changes the "showweeknumbers" of the calendar I need to move some label to the right of the calendar, but I also need to resize the panel. The problem comes into play when the user hides the weeknumbers, the monthcalendar resize event fires and the labels move, but the panel resize causes the month calendar to fire the resize event again, making the labels all out of wack...
View 1 RepliesI have a few reasons that I need this to happen, but suffice it to say that when I use the event handler for the RadioButtonList the sender object returns as just the RadioButtonList, and I need more information from the GridView because that's how I can uniquely identify which record my RadioButtonList is tied to.I added an "OnSelectedIndexChanged" property to my GridView but it doesn't fire/handle when I want it to. I'm assuming this has something to do with the way the GridView is designed to work. I also thought about using a hidden field, but I can't add it to the RadioButtonList so it won't help unless it's global. The problem with it being global is that I can't set the value uniquely to the record that has it's RadioButtonList being altered.
View 1 RepliesI've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster
basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1
master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
i have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If ViewState.Item("nameload") IsNot Nothing Then
If ViewState.Item("nameload").ToString = "True" Then
[Code]....
The following code was working the other day. Now it isn't. When I type a character in the textbox the event doesn't fire.
[Code]...
why the event would just stop firing?
I'm trying to make it so this the cursor will jump to the next textbox after the user enters 1 character.
OS: MS Server 2003
Visual studio 2005
I had a button on a page that worked at one time and all of a sudden stopped working.
[code]...
[url]...and have applied the vb code. The problem I have is that the user doesn't navigate within the datagridview. They click a save button on a toolstrip. As the user doesn't move from the current cell then the cellvalidating event doenst get fired. [code]...
View 5 RepliesMy ie.documentcomplete is not firing from my installer but it works fine from my source.I don't know where i m going wrongmy working environment
For Each Me.ie In New ShellWindows
If GetForegroundWindow = ie.HWND Then
AddHandler ie.DocumentComplete, AddressOf _
[code].....
We're trying to design a toolbar to use as an addon in another program. we want to set one of the buttons so that when u single click it, the image on the screen is blanked out. And when you double click the same button, it blanks everything except the selected image. However the DoubleClick event doesnt seem to be working at all.
[code]...
I have two forms that I worked on separately, each has an event load button that works with a datagridview without any problem. but when I created a third form and moved the buttons on it and try to update the datagridviews on the two forms, it doesn't fire up here's my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...