Can anyone tell me what is wrong with this code? It looks OK to me but the GetImage function returns the same image irrespective of the filename passed to it (the one corresponding with Id=2 which is the second one found) [code]
View 3 Replies
Basically we ran into where, for whatever reason, we had to put some 3rd party dll in the GAC for it to work correctly. (The assemblies loaded, but had weird behavior and trouble finding types in the loaded assemblies. The app itself is a add in to another 3rd party program, so it must be something about how its being loaded.) So I tried to write some quick code to handle this without having to manually do this on each machine it was needed on. This is basically what the code boils down to:
Dim X As New System.EnterpriseServices.Internal.Publish
X.GacInstall(name)
Where name is the filename of the dll. This runs without error. It even add the assembly to the GAC. However, the application still experiences the same issue until you manually add the assembly in .Net Configuration window.
Assume an application uses the Dim SalesArray(1 to 10) As Integer instruction to declare an array named SalesArray. The array contains 10 sales amounts. When the user clicks the DisplayAverage button on the form, he or she should calculate and display the average sales in currency format. The code for the DisplayAverage button doesn't work. Fix it.
[code]...
I used site to convert from C# to VB but converted code doesn't work. Can some one to convert that code to VB 2008.
private void TreeViewItem_Selected(object sender, RoutedEventArgs e)
{
ExpandToItem(sender as TreeViewItem);
}
void ExpandToItem(TreeViewItem i)
[Code]...
Assume an application uses the Dim SalesArray(1 to 10) As Integer instruction to declare anarray named SalesArray. The array contains 10 sales amounts. When the user clicks the DisplayAverage button on the form, he or she should calculate and display the average sales in currency format. The code for the DisplayAverage button doesn't work. Fix it.
Sub DisplayAverage_Click( )
Dim X As Integer, Total As Integer, Average As Single
If X = 0 to 10
[code].....
I have this code that gives me the user logged on name of a remote computer, but if i run the program in certaing computers, it returns with the error "Not Available Due Restrictions" which is set if the scope cant connect... why it connects fine in some computers and other not..is there something i have to add to the code for it to run fine in any computer
[Code]...
i have a simple code that send an e-mail, when i try it running in debug mode it works fine, after compile, i run the exe but the same code doesn't work any more..
View 2 Repliesi'm trying to make a calendar and now i'm trying to know whether if it's a leap year and how many days in the current month etc. but my codes doesn't seems to be working and i don't know where is the problem,
[code]...
I have a page with multiple RadPageViews, some with RadGrids in them. They all need command item template in order for the user to edit and refresh the grid. On my first page view, the item template works perfectly, poping-up the edit form for the user to edit the data of the selected row. On my second page view, the command item template buttons don't seem to want to work (not even the refresh). If it were just the edit button then i would suppose there'd be a problem with my edit form, but not its that no buttons seems to work (not even refresh). The grid does display the information correctly too.
Here is the code of the pageview who's radgrid doesn't seem to work:
CODE:
I've been going through it many times and i don't understand why it doesn't work. I've also compared it to the working pageview and there doesn't seem to be any noticeable difference between them both.
I am trying to change the background color of a tooltip
I am using tooltip.backgroundcolor = color.colr
No errors but thecolor doesn't change
I have an application that requires data be entered, and after entering, a button is clicked to process that data. Clicking the button works just as it should--the data is processed properly. In constructing a test module, I provide a set of data values, followed by:
btnWhatever.PerformClick()
Nothing happens. I have used this syntax for years, and it has always worked flawlessly. I have triple checked everything else and isolated the problem to the failure of the PerformClick(). The PerformClick() is in a test subroutine that does nothing but fill textboxes and labels with default data, then calls the PerformClick() on the button to begin processing. Again, the button works fine, the data is entered as it should be, but the PerformClick() does not fire the click event.
Is there anyone can post a simple code using vb,that start building a simple games ?
View 2 RepliesI am trying to get a query to work with Visual Basic 2010 Express addition I have pasted the code below but it just errors out with to many arguments I have taken this sample from a reference book but cannot get the darn thing to work. I have looked all over the net and Microsoft for a solution but still no go if any one can help it would really be great. BEP
Private Sub FillBypeeps1ToolStripButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles FillBypeeps1ToolStripButton.Click
[Code]...
I am making a calculator Program to start off on visual basic. I got it to work with MsgBox, but now I'm trying to get it to work with the Print.
MsgBox Example
Public Class Form1
Private Sub Button1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Button1.MouseClick
Dim Pizza As Integer
[Code] .....
Say I type in 6 and 6 I'm getting errors saying Example: Conversion from string "youranswer is 12" to type 'Integer' is not valid. I've tried many things, but it's not working. I want to know what I need to do to get it to print out how I want it. Do I need to do some conversions properly somehow?
Is it possible to make a simple Image Editor were you can draw and edit images in vb.net? If so how would you do that? (Its would also have to compile the image as well into an image format)
View 4 RepliesCan any body tell me why this simple paint project wont work.
View 1 RepliesMy Com1.text has nothing in it but yet the button1 is still visible when it should be false and not showing. This worked fine in vb6 using command.caption.[code]
View 14 RepliesI am trying to setup a treeview control to display all drives and folders on the PC. So far I can display all drives and folders but the images will not show except rarely. I am using an imagelist with 4 images (index 0-3). The code below is used to load the drives in the treeview control. I have tried using every type of image possible from bmp to png and nothing. I have tried the Appllication.EnableVisualStyles() which I now know isn't needed in vs 2008. I am also having problems with a picturebox in another form that shows nothing but a shadow of the image. I suspect this may be a setting somewhere maybe in vs 2008 but am not able to find one.
Treeview
Dim drive As Integer = 0, dir As Integer = 0
For drive = 0 To oDrives.Length - 1
[code]....
Possible Duplicate: Datagridview doesnt work! I have written code to show records in a datagridview but it shows nothing. I have tried to debug & when it step into GetData function following codes
Catch ex As Exception
returnData = Nothing
If connection.State = ConnectionState.Open Then
connection.Close()
End If
become gray & it shows error sign. When I take my mouse pointer on it it shows message. It says "Cannot open database SUIMT requested by the login. The login failed. Login failed for user 'MY-PCJames'".
Imports System.Data.SqlClient
Public Class Form34
Private Const ConnectionString As String = "Server=.SQLEXPRESS;" & _
"Database=SUIMT;Trusted_Connection=True"
[code]....
So I have 2 data files, single dimension, that I'm trying to populate two rtb. If I comment one streamreader out the other will print. This also works in the vise versa situation. Does anybody see where I'm going wrong with this? They won't run together.
Dim Alpha As New System.IO.StreamReader("alpha.dat")
Dim Beta As New System.IO.StreamReader("beta.dat")
Dim strLine As String
[code].....
dim str as nullable(of string) is this syntax incorrect?
View 1 Repliesi'm working on a MDI application and need to view a ".PDF" files in a MDI child form, but when using the AxAcroPDF control it doesent work, note that it works fine when viewing the form separately from the MDI application.
View 14 Repliesthis is my code:
Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
For i = 0 To 1000
[code]....
Has anyone succeeded in creating a class library solution/project in VB.net VS2010 4.0 Net Framework for COM to run on WindowsXP Excel 2003. I created a dll which changed specific data in an excel worksheet. The dll worked just fine on the development computer but wont work on any other. I downloaded .NET 4 framework onto the target PCs and used RegAsm.exe to register both the .dll and .tlb files in the registry. That worked OK and the dll is visible as a reference in excel and can be ticked. The error message I get is RunTime Error -2147024894(80070002): Automation Error The System cannot find the file specified.
I also tried creating a Setup and Deploy project in the original development solution but this created just a vbproj setup file which the target PC cannot read (no VS installed), I hoped the project would create an EXE file I could use. Does anyone know any links that describe how to do this type of stuff as most links I have tried are either for Windows Forms projects are are way above my knowledge. Maybe someone out there has already succeeded with this sort of activity?
I have Visual Studio 2010 Express Edition. I'm using it to evaluate functionality before purchasing the real thing, but I'm having trouble. I want to build a DLL that can be used on PCs other than my development PC, that I can call from VBScript.
I follow the hundreds of examples out on the intranet and things still don't work.I have built a simple HelloWorld DLL with a function that returns "Hello World".I've been through all the stuff about making the assembly COM visible, and the threads about Register for COM Interop checkbox missing. One person suggested editing the .vbproj file and adding a tag to turn on Regiser for COM Interop (which was not needed because it was already there).
Anyway, if I build my project and run my VBScript:
Set testdll = CreateObject("HelloWorld.Class1")
wscript.echo testdll.HelloWorld()
Everything works great. But....if I copy the DLL to another PC and register it with RegAsm, the VBScript fails with a "File not found" error on the CreateObject line of the VBScript.
In fact, if I unregister the DLL on my development PC and then register it with RegAsm, the VBScript now fails on my development PC. RegAsm said everything was okay and if I look in the registery using RegEdit, things look good, but it still doesn't work. The only way to get it to work again is to rebuild the DLL (which in turn, registers the DLL).
I'd like to be able to build a DLL which I can be registered and used on other PCs (without requiring those PCs to have Visual Studio 2010 EE and without requiring them to have the source and build the DLL).
Dim
a As Date? = Nothing
Dim b As Date? = If(a Is Nothing, Nothing, GetValue(a))
I thought b would be Nothing, but it is not...is it a bug?
I am getting a datarow from my dataset and some columns can be NULL.So I am trying to check for this using the IsDBNull function, but it just won't work. I have tried almost every possible combination. Can someone please explain to me how to use this properly?ser is a datarow and GUID is a column with data type: unique indentifier (so a Sytem.Guid)
user.GUID.Equals(DBNull.Value) Then .GUID = System.Guid.NewGuid
I tried using above, IsDBNull(GUID), guid = dbnull.value, guid is dbnull.value etc etc I am just getting this error: The specified Cast is not valid.
[code].....
why this code doesn't work?
[Code]...
i made a picture box and the fowling event when my program runs:
[Code]...
So basically I made this code below to make my application (when the mouse leaves), go smoothly in an 70% opacity, with a fade.
Private Sub Timer3_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer3.Tick
Me.Opacity = Me.Opacity - 0.05
[code].....
