Splash Screen Not Seen When StartUp Form Window State Set To Maximized?
Apr 29, 2011
I have my start up form in maximized window state, but this cause the splash screen appear behind the startup form, which cause it cannot be seen.Even i have set the time longer to display the splash screen.It still do now work. I have tried below code in the start up form but it is not working...
Private Sub Main_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
Me.WindowState = FormWindowState.Maximized
End Sub
View 2 Replies
ADVERTISEMENT
Dec 17, 2011
I am using VB Express Edition 2010, and I want a button, when clicked, to make the form 'full screen' (border style done and maximised window state) and once clicked again, to return the form to maximised but with a fixed single border style. Here is my
[Code]...
View 4 Replies
Feb 9, 2012
I have a Windows Form Application to which I added a splash screen created using the splash screen template. I also added an MDI Parent Form. In my project properties, I chose the splash screen and the MDI Parent as the loading form.
I want the MDI Parent to load Maximized, so I changed the WindowState Property in the list to do just that. Now here is the problem:
If I leave the WindowState set to Normal, the splash screen loads, does its thing, closes, then loads my MDI Parent just like it is supposed to, BUT, if I set the WindowState of the MDI Parent to Maximized, the splash screen displays for about a second, the MDI Parent loads on top of the splash screen, and the splash screen finishes in the background and then closes.
I tried giving Focus back to the splash screen in the Lost Focus event but that didn't work. I know splash screen is still open and working when it gets covered up because I can hit ALT+TAB and see it just before it closes on its own like its supposed to. I also never adjusted any of it's time settings or any other settings.
How do I keep the splash screen on top while my MDI form is Maximized? or how do I delay the MDI until the splash screen has done its job? I dont understand why I am getting this result.
View 3 Replies
Mar 18, 2012
How to check weather the window is currently maximized or restored. I want to do something like if window state maximized then border none and if window state regular, then form border style sizable. This is what I wrote
[code]...
View 1 Replies
Apr 20, 2009
I'm having a lot of trouble with the windows in my application to size correctly. As a sample, I have a container form (mdi parent), with in which is Form1 (with a datagrid) and a form that is only called when a cell in the datagrid is double clicked. I want Form1 to always be maximized so I set the properties as follows:
Windowstate = Maximized
FormBorderStyle = None
AutoSize = False
MaximizeBox = False
MinimizeBox = False
So when I maximize the parent window, Form1 maximizes and shrinks correctly... but when I double click on the gridview and the popup form comes up, several things happen:
1. Form1 (in the background) goes back to normal size (not maximized)
2. If I click on Form1 (when the Popup form is on the screen) the form disappears into the background...
What I need to happen is for Form1 to always stay maximized, no matter what happens on the screen, and when the pop up form is on the screen, I should not be able to click on any form in the background, and it should never disappear into the background itself.
View 3 Replies
Feb 21, 2010
RUNNING VERSION 2008 Basic I've decieded to put a Splash Screen on my software. My main question is how do you make it so the Splash Screen shows for about five seconds and then startup Form1.
Also, on the splash screen it auto-fills the info. Does anybody know how to get rid of that and make it custom?
View 3 Replies
May 31, 2011
I have an MDI parent screen that loads on startup and a lot of child forms that load when opening. So as the child forms load there's a lot of flashing and it looks really ugly. Once they're loaded all I have to do is use a bring to front, maximized command and it works smoother than closing a form and opening a new one every time a different form is selected. I've tried creating a splash screen, minimizing the forms on load, etc and everything still works in order so first the splash screen then the forms load.
How would you set it up so a splash screen stays on top of all other forms for like 5 seconds while the forms load in the background without seeing them load? Right now the screen shows then when it's done it moves on to step 2 which is loading the child forms. If no splash screen, how do I make it load so you don't see all the child forms opening at once?
View 3 Replies
Feb 11, 2010
Supposed to be my form should be in maximized state when the time passed. However its not fully covered my screen its just covered slightly half on top left of my screen. What i meant is that i set my timer into 500 and decrease it by 5, while the timer running i open my WarCraft3 and its in full screen, when the time expires my form should be in maximized state "covered my screen" but it doesnt, i know it is because when Warcraft3 open it changes the resolution. SO am i able to fully covered my screen ?
View 2 Replies
Mar 15, 2012
I am developing a application where I have 1 parent from (windowstate of Parent from is set to Maximized) and 2 child forms. In my Parent form I have a menustrip with following code to activate child -
[Code]...
View 1 Replies
Sep 28, 2010
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
FormBorderStyle = FixedDialog
MaximizeBox = False
MinimizeBox = False
StartPosition = CenterScreen
WindowState = Normal
The problem is that if the first MDI child form is in a maximized state and the user double clicks on the flex grid, the second child form loads in a maximized state too! How can I stop this?
View 4 Replies
Jan 16, 2009
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
FormBorderStyle = FixedDialog
MaximizeBox = False
MinimizeBox = False
[code].....
View 2 Replies
Oct 31, 2011
I have an application with a SplashScreen. While loading the application, the application will check certain conditions and if the condition fails it throws a message window. I problem is when the message window is thrown it is displayed just behind the splashscreen and user is not able to see the message and unable to understand whats happening while the SplashScreen is displayed as it is till he clicks ok on the message box.
View 13 Replies
Jun 22, 2011
This is the code i have written
Private Sub Application_Startup(ByVal sender As Object, ByVal e As System.Windows.StartupEventArgs) Handles Me.Startup
Dim splash As New System.Windows.SplashScreen("LoadingScreen.png")
splash.Show(False)[code]....
I'm getting an error as "Startup cannot be found"
View 4 Replies
Oct 1, 2009
We created a vb.net desktop application in Microsoft visual studio 2005, in deployment phase we found that the application are vary slow in startup (Splash screen), we try many solution (ngen, remove unused name space, code, references) to speed the load but we could not solve it.
View 5 Replies
Jun 24, 2010
I am developing an windows application in VB 2008, My requirment is such that I have to change the applications Splash and Startup object on the basis of "Custom Constants" (Compilation Constants).As far as I have .Net idea it should be done in Application.Startup Event (guide me if i am wrong)Now, in Application.Startup_Event when I write the code
Private Sub MyApplication_Startup(ByVal sender As Object, ByVal e As Microsoft.VisualBasic.ApplicationServices.StartupEventArgs) Handles Me.Startup
My.Application.SplashScreen = SplashScreen2
[code]....
The application dont work as desired, instead it starts with Form2 (which is OK), while in case of Splash it doesnt changes the splash form.
View 5 Replies
Jun 21, 2010
I have tried the following codes. The maximised window worked but the centralizing failed. How centralize a form in maximised window?[code]...
View 2 Replies
Jun 21, 2010
While my program loading, I have a splash screen. After the program is done loading my Splash-screen closes and the main form (form1) shows (all good up to that point). But the problem is after the Splash-screen I cannot close form 1, nor can I move it. here is what have.
[Code]...
View 6 Replies
Dec 7, 2009
I'm writing a small app which I want to display a splash screen. The problem is my form 1 is appearing before the splash screen disappears. In fact is appears on startup blocking the splash screen. I have some code in form_load and have managed to figure out which line is causing the error, but I cant figure out why or how to prevent it.
The line reads
LoadSettings()
If I comment out this line everything runs fine and there's nothing in that sub that should affect form1. I'm doing this in vb express 2010.
Here's the code for my form_load:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
LoadSettings() ' this line is causing the problem
My.Application.MinimumSplashScreenDisplayTime = intSSDelay * 1000
'resolution check
[Code] .....
View 5 Replies
Aug 20, 2011
was trying to make a splash screen using a form (so that it fades in and out) however i cant get it to stop for the person to read it (at least for 5 seconds) this is the code
Public Class Form1 Private increase As Boolean = True Dim time As Integer Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]...
View 19 Replies
Nov 27, 2009
I am experiencing an annoying problem with my second for when it opens. Here is the code :
If
My.Settings.NoSplash Then
Me.Hide()
[Code].....
None of these makes any difference. If issue a Close() on form1, the entire program closes and not just form1. Is there a property I need to tweak or set on either of the forms to stop/fix this?
What I am trying to do is show a splash screen then the next form. I have given them the option to "skip" the splash screen if they don't want to see it any longer and this is where I am having the problem.
View 3 Replies
Jan 14, 2010
Hello.. I'm using a splash screen for the first time in an exercise. I have it set up to display the splash screen before going to the main form. I made changes to the splash screen title and copyright information. When I execute the program, the splash screen comes up but it's not displaying the information I changed. When I view the splash screen the changes are saved. It displays the project name where the application name should be.
View 18 Replies
Apr 7, 2011
Is there a way to load the data for my form during the splash screen and simply show the form when the user clicks on the button? I'm using a thread which fills my DataAdapter using Form.DataAdapter.Fill(Form.Dataset.Table), but when I open the form the data isn't shown (I removed the line from my form_load event to prevent a double load). Is there anyway to tell the form that the DataAdapter has been filled already and to look at the information there instead of loading the data everytime the form loads?
My problem is that the form takes a while to load due to the amount of data it is looking for. If I could already have the data ready and then display the form when the user clicks a button it'd be perfect. I apologize if I'm missing something, this is my first time diving into VB.Net with VS2010 after using Access VBA for awhile.
View 2 Replies
Jul 2, 2010
I would like to display my splash screen for a set amount of time (5 seconds). While the splash screen is displayed, I added code to the load function to determine which form to load next. I have the splash screen selected in the Application Properties settings. I also have to select a "Startup form:" in the Application Properties settings.
I'm having a couple of problems. First, the form selected in the "Startup form:" is loaded and displayed along with the splash screen.Next, the form I select in the splash screen load is not started. Only the "Startup form:" is loaded.
View 2 Replies
Oct 7, 2009
i have created a splash screen by removing form border and importing an image to the picture box. also i have set a timer for 7 sec after which the splash screen will close itself and will open the MDI form. But after seven second altough the splash screen closes but it also closes the MDI form too. I am not able to figure out the problem.
Form1.vb
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
View 2 Replies
Jul 5, 2009
Let's say I want to put a 10 second delay on my splash screen before loading the next form or app.I use a timer, but would it be a simple integer value or several different lines of code?
View 3 Replies
May 11, 2011
Namespace My
Partial Friend Class MyApplication
Protected Overrides Function OnInitialize(
[code].....
View 5 Replies
Feb 16, 2012
My main form shows at the same time as my splash screen.
ApplicationEvents.vb:
Partial Friend Class MyApplication
Protected Overrides Function OnInitialize( _[code]....
View 1 Replies
Jul 15, 2010
I have created a splash screen and would like it to display for 5 seconds and then display the MainMenu form. The book I am following suggested using
Threading.Thread.Sleep(5000)
but it just makes the splash screen APPEAR after 5 seconds of nothing.
View 21 Replies
Dec 18, 2009
Im trying make my application display my splash screen for 5secs before loading my main form. I have read lots of threads on this and they all seem to point to the following:Add the following code to the New() sub of the splashscreen.
My.Application.MinimumSplashScreenDisplayTime = 5000
I have also seen a suggestion to add the following code to the OnInitilalize event in the ApplicationsEvents file.
Me.MinimumSplashScreenDisplayTime = 5000
I've have tried both ways, and although it successfully makes my splashscreen wait 5 seconds before closing, it doesnt prevent the Main form from waiting for the splashscreen to close before loading. The mainform simply loads over the top of the splashscreen.This thread is exactly what im after but i cant seem to get mine to work.
[URL]
I have application framework enabled. I have my startup form set to my main form, and i have set my splashscreen in the application tab of my project properties. Im using VS2008.I also noticed that when i clicked on the "View Application Events" button in the application tab of my project properties, the file was blank. I have seen that some other people have had problems with this. I just cut and paste the following code into my ApplicationEvents file. Potentially an issue??? Any reason why the code was not auto-generated to begin with?
Namespace My
' The following events are availble for MyApplication:
'
' Startup: Raised when the application starts, before the startup form is created.
[code]....
View 4 Replies
Feb 15, 2010
I've tried adding a splash screen ]...to one of my applications and after exploring a while I somehow managed to get it working what bugs me now is that my splash screen is in fact a image inside a picture box and the form always shows the control color behind so what I tried is adding the form color to the transparency key this worked, somehow now, I use a png image that has some transparent effect also what I've noticed is that where I would want to show the transparent effect from the image the transparent color that is set in the forum shows below is the image to get my point of view:
I'm wondering if I can remove that "pink" color (set by me in the forum) from the image .I want to get a effect like the one Adobe products have for example
View 7 Replies
