String Variables From Random Access File
Nov 17, 2010
I'm tasked with the job of creating a javascript version of a units conversion application written in vb6. I have the source code but I don't have vb 6. The source code uses a dat file to hold a conversion array (unit type, unit, xfactor, plusfactor). Getting the data out of this file would be good to me. I tried creating a little app in vb 2010 to write the data from that dat file to a txt file using essentially the same code as the source code. And that has been somewhat successful (took a while to figure out the fixed string business). Now I can pull the data out as an array. The math elements of this array look fine but the strings are somewhat read-able but too garbled to use. I can't seem to fix that by changing the character set/encoding.
View 3 Replies
ADVERTISEMENT
Jan 24, 2009
I'm working with random access files. I created a module and in it put the
Structure PersonData
Dim Name as String
Dim Age as Integer[code]....
The problem is strange... it will let me input string lengths of 3 for Person.Name and Person.Description and it will save correctly, however, the moment I try and lengthen the string (or even if it's longer than 3 to begin with), I get a 'bad record number' error.
View 2 Replies
Jan 7, 2009
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
View 8 Replies
Oct 19, 2011
Years ago when coding with VB6 and earlier, I used a file open command to create, read, and write a file that made it easy to store useful information.I believe it was binary and you wrote/read the data to a specific line in the file. When you opened the file with something like notepad, it just showed random ascii chars. When I needed a line of data, I could specify what line to load it from.
View 2 Replies
Jul 1, 2010
I need an example of how to create and use a random access file
View 3 Replies
May 20, 2010
Created Structure
opened file using FileOpen(1, "filename.dat", OpenMode.Random, , , bytes in structure)
used structure .ID = record number
FilePut(1, structure)
FileClose(1)
The program enters the first record but although when I enter more records it still shows only one record in the file.
View 2 Replies
Jan 15, 2010
I am moving all of the prgrams that I have written, to VS2008. However, I use Random Access File Foemat for the databases that have been used for over a decade. I need to be able to read and write to a Random access file.I have multiple fields in the database and cannot lose access to this information.VS2008 doesn't use the following type of code to define the Fields that will be used in the Database. I did what it suggested, using the Structure / End Structure, but that was as close to a solution that I could find in the Help Files.
Type EquipType
EquipName As String * 32
Location As String * 28[code].......
View 2 Replies
Jun 23, 2011
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
FileNum = FreeFile()
[Code].....
View 3 Replies
Apr 25, 2010
I'm doing a Program for a Friend of mine, He Want to have a Console Program Running on his Computer.OK the problem i am having is With Stream Read, I have 3 test users inside Test File, if User 1 logs in his information is store in logged file with time and data.but if User 3 logs on user 1 2 and 3 are all saved on the logged file
i dont have read to end of file in my Code.i dont have my Program with me, so i going off the top of my head i have something like this what i want to be able to find out how to do is Right from any part of the file and out put it, I take it i need to use Random Access but how to i code Random Access for this type of file. All i can find is how to Randomly place Words in a text file with Length and size.
[Code]...
View 16 Replies
Mar 2, 2010
I achieved reading and writing data to a random access file, buthow do I write and read data from a certain position in the *.txtfile? Would it be better if I created multiple file modes to
View 2 Replies
Jan 30, 2010
I am using Visual Basic 2009 to create a file of records to store students tests scores.Currently i can write to the file, create new records etc. However i cannot edit a particular record, im sure i have to use file seek function but i have no idea where to start.here is some of my source code to give you an idea of where im at
Do While (Not EOF(1)) And found = False 'loop until no more records or the record is found
nosrecords = nosrecords + 1
FileGet(1, onestudent, nosrecords)[code].....
View 3 Replies
Nov 2, 2009
how to read and write random access records in .NET. Now I know random access files are dead and the response on every query I found with google/bing/yahoo searches was don't use random access use Binary serialization but I can not. I have a situation where I need to read and modify 256 byte records in a file that is used by another application.
Now for a bit of background the file is made up of 27 fixed length records of 256 bytes. Each of the records has a separate structure consisting of 30-120 fields. The proplem I am having is I can create the record structures but when using the FileGet method I am receiving an error. Now I have found samples that showed the same format I am using that claim to work.
The error I am getting is Option Strict On disallows narrowing from type 'System.ValueType' to type 'ProgramName.ModuleName.Record' in copying the value of 'ByRef' paramater 'Value' back to the matching argument.
The basic layout (simplified) is as follows:
Code:
Structure Record
<VBFixedString(6)> Public SomeParam as String
Public SomeNumber as Short
[Code]....
Now the overloads for FileGet show all of the data types including Object. But I have tried various methods to retreive the 256 byte record but without success. Do I have to actually read each of the several hundred fields of the structure one by one? Or am i overlooking something (I have been known for this in the past)
Or (and I'll kick myself if this is the only way) do I just have to set option strict Off in the module and the code as above will actually work.
I would love to be able to just ditch the random access file but I have to keep it for compatibility with several other applications at this time.
View 14 Replies
Sep 3, 2010
The application reads information similar to a DXF file. For purposes of discussion, the data consists of lines, those lines have endpoints, x1,y1,x2,y2. Within the file those lines create "paths", in other words, they are connected. There can be many separate paths within a single file. However in the original file, the geometry is not in any particular order, the paths are not indicated.
View 3 Replies
Feb 24, 2010
This time, basically, i'm working with Random Access Files.I have this et of code to read data from a form a save it into a .dat file. This works fine.
Public Class frmDramaClub
Structure MemberRecord
Dim ID As Integer[code].....
View 5 Replies
Jan 12, 2010
how to proceed. One of our customers is going to be sending me a flat file (ASCII-Text) that I have to break down and scan. Every line ends in a CrLf - So I know I can use StreamReader and ReadLine(). I did get it to work on one of the test files they sent.(A very Short file) However, the file is not delimited at all and every field is padded to the full length they specified. Here's the format of the file:
[Code]....
View 7 Replies
Jan 8, 2010
I am using VB2010 and currently have a random letter and number applicaation but for some reason students dont seem to have the ability to type these in correctly!Does anyone have some code to put words from text file or string into a text box.
[Code]...
View 8 Replies
Dec 24, 2011
I have a flat file that is sorted by account number. I am migrating an application that was in vb6 to .Net. The application uses Random file access and uses a binary sort method to find a record.
Here is the code
Do While (low < high Or low = high) And (f = 0) 'Checking for an account match
middle = (low + high) / 2
FileGet(FileNum, Record, middle)
If Account < Trim(Mid(Record.Data, Byte1Start, Byte1Len)) Then
[Code] .....
From reading up on this in .Net it seems that using the Binary Reader seek method would be the alternative to using old vb6 random access code. The problem is the Binary Reader Seek method goes by Byte position instead of record number. How to convert my code to use a binary reader.
View 2 Replies
Jul 14, 2011
When you need to do random access to the lines of a text file, the regular solution is to put those lines in a list and access them in that list.But doing this if the text file is large creates a large memory overhead and may cause some memory stress on the application.This class maps the file and provide the ability to read any particular line in the file at a random position, without the need to read or put in memory any other line but the desired line. The only memory overhead involve is the 1024 bytes buffer of the base stream.Even if the file mapping can be a process that consume a noticable amount of time if the file is very large ( ~ 5 seconds for each 100,000,000 caracteres) , once the mapping is done the access to a particular line becomes instantaneous regardless of the size of the file. (The file mapping can always be done at a convenient time (ex when the process load) and can be done on a worker thread The class is base on a StreamReader to support the differents Text Encodings Example uf usage ( As I say, if the file is very large, dont do it like that, but declare the class at a convenient time)
Imports Reader = System.IO.MyStreams
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
View 11 Replies
Dec 11, 2011
Last year (2010) I came across a FANTASTIC command that allowed me to take a string of variables with a common delimiter and break it all back out into separate variables (possibly an array) with one statement.
[Code]...
As long as the delimiter was a unique specifiable character, this one-statement command could break it out into elements. my memory and point me in the right direction.
View 2 Replies
Mar 12, 2012
I have 2 variables that I want to get a random value from in between their values... as of right now, for my working example, I have 2 stats... mindamage, and maxdamage, each being 30 and 60 respectively, well I am trying to get a random value between them, and then multiply it by a random number between 1 and 10 from after obtaining the random value between those two variables...
The code is as follows:
Public Sub agressive()
Dim agressiveattack As Integer
Dim MyRandomNumber As New Random(Now.Millisecond)
Dim x As Integer
x = MyRandomNumber.Next(CI.mindamage, CI.maxdamage)
agressiveattack = CI.strength * 1 + (10 / x)
MsgBox("Your agressive attack is " & agressiveattack & " points.")
End Sub
This is finally my first attempt at the beginning of my rpg's combat system... once I have a working adaptation of this code, I will be able to use it as the groundwork for my other three battle functions.
View 8 Replies
Mar 25, 2012
i want to random 3 variables...
dim a as integer = 1
dim b as integer = 2
dim c as integer = 3
dim result as integer
result = random ( a , b , c)
How do i write the random stuff in visual basic.and how would i write something that Deletes the a from the random ( ); so im only left with random ( b , c ).
View 1 Replies
Apr 23, 2011
I have a label that reads a random line from a text file and that string becomes the text for the label.
Now the problem; the label will only work if it is clicked because the event handler is click.What I need is this to work automatically at startup. In other words, it should change the label's text to the random string of the text file on startup of the application.
Here is my code.[code..]
View 4 Replies
Feb 8, 2011
The company has a Visual Studio 2010 Ultimate project that is written in Visual Basic. The project has several strings in the resources file (Resources.resx). One of those strings (VersionSuffix) contains "" when we are distributing a normal version of our product and "BETA" when we are distributing a beta version of our product. Most of the time we distribute a normal version of our product. Therefore, most of the time the resource string VersionSuffix contains "".
Recently, we attempted to distribute a beta version of our product. Therefore, we changed resource string VersionSuffix from "" to "BETA". However, it quickly became apparent that the resource string VersionSuffix was being used as the default value for several control properties in the form designer. For example, if I draw a rich textbox on a form then file FORMNAME.Designer.vb will contain the following.
Me.RichTextBox1.Location = New System.Drawing.Point(286, 306)
Me.RichTextBox1.Name = "RichTextBox1"
Me.RichTextBox1.Size = New System.Drawing.Size(134, 33)
Me.RichTextBox1.TabIndex = 32
Me.RichTextBox1.Text = Global.PROJECTNAME.My.Resources.Resources.VersionSuffix
We are unable to find anything anywhere that indicates that this resource string should be used as the default value for control properties. Therefore, we have no idea why this resource string is being used for this purpose. We would like to change the control property assignments in the designer from Me.RichTextBox1.Text = Global.PROJECTNAME.My.Resources.Resources.VersionSuffix
Me.RichTextBox1.Text = "" However, we don't know why these strange assignments are being made. Therefore, as soon as someone adds another control the problem will most likely return. Does anyone know why this is happening and how to prevent it from happening again?
View 10 Replies
Sep 18, 2009
I need a good book for beginning to use VB 2008. I have some (limited) experience in using VBA. I want to access a database (SQL) and have access to the data set as variables?
View 6 Replies
Jun 12, 2011
The string itself contains things like "random" & random.next(1,3) & "random2" etc. The string registers all of this as a string and doesn't actually calculate random numbers.Is there any way to fix this?
View 8 Replies
Jun 17, 2011
I am developing a winform application which targets .NET Framework 4. I would like to get the connection string from the app.conf file but the Imports System.Configuration.ConfigurationManager fails. I can do a Imports System.Configuration but I cannot get to the .ConfigurationManager.
View 7 Replies
Nov 17, 2009
I want to ask that where to store connection string in VB.Net.AS in ASP.net we can store connection string in web.config file and access it in the foll. way [code]In VB.net where to store conn. string on form_Load or any other place???
View 1 Replies
Sep 15, 2010
I'm trying to use variables created within a loop, but I'm not sure how to do this. I've searched around on the net and there is a few recommendations to try and put what I require into a function then just call the function.
[Code]...
View 2 Replies
Feb 1, 2012
Basically I just want to use
tile1.backcolor = colors.while (just an example)
however tile1 is only created WHEN the form loads, and it will not let me compile it becuase it's saying it doesn't exist
View 8 Replies
Aug 9, 2009
my form is connection to an access db ....called Quiz.db , it has 10,000 questions and answers , i want to click button and generate random question with correct answer , so ID# of record must be random on load and click next?
View 3 Replies
