Suspend BindingSource Filter While User Changes Rows
Mar 15, 2012
I have a DataGridView that uses a BindingSource that has a DataTable as it's DataSource. If I filter the DataGridView by using the BindingSource filter on a particular column, then I change a cell value in that same column the row disappears. For example, if I filter my "Shipped" column which contains CheckBoxes to only show True and then I set one of the CheckBoxes to False the row disappears from the DataGridView.
I do not want the row to disappear until the BindingSource filter is changed or removed. How can I suspend the BindingSource filter and then resume the filter if the filter has changed? I want it to work like MS Excel's filter. If you filter a column in Excel to only show cells that equal "Apple", then change the cell to "Banana" the row still shows, but if you change the filter the "Banana" row is removed. This how I want my BindingSource filter to work.
I not sure if this can be done with strings, but I have to ask. I have a BindingSource that I want to filter. I want to filter a column that has a data type string. I want to filter for all strings between "Cat" and "Monkey". Also,I would like to do the opposite, filter all strings that are NOT between "Cat" and "Elephant".For example, look at my datasource:
Ant
Cat
Dog
If I filter for strings between Cat and Monkey my filter would return: Cat, Dog, Elephant, Monkey?If I filter for strings NOT between Cat and Monkey my filter would return: Ant, Zebra ?Is this possible?I don't want it to be case sensitive, so I assume you would have to use Option Compare Text.
I am trying to filter the results of a datagridviw using the bindingsource.filter method.
Dim filters(2) As String ... If Me.txtPartIDFilter.Text = "" Then
[code]....
The issue is in the last line. ID_Part is an Int64 data type filters(0) is a string so the system returns a "Can't perform 'Like' operation on System.Int64 and System.String" error message.As you can see I tried converting the data type, but that failed since it is encased in String.Format()- it's going to be a string no matter what, I suppose.It's almost 1:00 a.m. so I'm not firing on all cylinders.
How may I filter a bindingsource between 2 numbers? Obviously "column_name BETWEEN Num1 AND Num2" does not work, since "between" operator is not supported
I consider myself fairly new to VB.NET, so maybe you could help me here.I have a bindingSource which is bound to a dataset. I have a filter on the bindingsource. My problem is that when I add a new row, with BindingSource.AddNew, even if it does not match the filter criteria, it still isn't filtered out.Could it be that the bindingsource filter never filters out detached rows? If so, what can I do in this situation?
I've been researching it, but can't seem to find any relevent info. I'm trying to filter my BindingSource by first letter in a certain field, in this case, the title field. I can't seem to come up with the correct syntax for constructing the string. The scenario is thus.here is a dropdown combobox with a collection of items such as '0 - 9', 'A', 'B', etc...My filter so far looks like this, at least for the letters, probably have to chain one for the numbers...
I have a form that has a DataGridView named dgvResults on it. When the form is initialized I bind dgvResults to a DataTable named prpResultsTable using a BindingSource named bs. Code shown below:
Public Class frmImportData Private cv_clsB As clsBatch Public Sub New(ByRef clsB As clsBatch)[code]....
I want to use a BindingSource to filter data from a database based on column of type Time but I cannot figure out the syntax for the filter. The filter will select records before or after an entered time. When I use a format of'10:30:00' the complaint is that a TimeSpan and String cannot be compared. Omit the 's and the :s are invalid.
I am developing a Winform Program in visual basic and I am using Access Tables. I want to use a bindingsource filter to do a search on Stock descriptions. I am using this but it doesn't seem to be working
Me.StockBindingSource.Filter = "ITEMNAME LIKE '%" & SearchTextBox.Text & "%' AND [Supplier1 Price] <> 0 AND [Supplier2 Price] <> 0 AND [Supplier3 Price] <> 0"
What's happening is that I am only seeing products where all 3 suppliers have a price listed that isn't 0. (Products have a zero price when it becomes discontinued or supplier doesn't sell that product but we may have purchasing history against it so it can't be deleted). Therefore we do end up with products where all 3 suppliers have a zero cost. These are the products I don't want this search to return.
I thought I had this sussed until I then wanted to filter between two values or greater than or less than two values. I have searched and searched all over the web for this and I just go round in circles. This is so frustrating why is this so difficult to find something so basic (anyway that is my rant). I have something like this but am totally confused and do not understand what I am doing now: how I get this working in plain English.
If I run this with just the date range filter it works fine it is when I add the second filter for the Job ID range I get the following error; {"Syntax error: Missing operand after 'JobID' operator."}
So I it is this line I have the problem with:
String.Format("JobID >= {0} AND JobID <= {1}", txtStartJobID.Text, txtEndJobID.Text)
I am using the following code to filter on a textbox value using the BindingSource.Filter function.I thought this was the right code based on my many searches.
When do a debug, it shows the correct value which is "432360ac-ac35-4101-8d46-f2cbd5b5dc52.There are spaces in the end of this value and it is exactly the same in the SQL database with the spaces. ValueID is a column in my SQL server. It does not filter the records in my dataset.I tried replacing the ValueToFilter.Text with my actual value as shown above including the space at the end and it filters the records just fine exactly as I want it to. Although I obviously need it to work for multiple values from my SQL server.
I'm using bindingsource.filter to filter data in my datagridview as the query from the datasource (JD Edwards) is being loaded the REQUIRED column is being converted from julian date to georgian date.everything works fine the date is converted and is visible in the datagridview as a short date string.However when i run the filter it wont work unless i manually select a row (it can be any row, but only one row) in the datagridview, then the filter will work.Me.testBindingSource.Filter = "REQUIRED = '" & DateTimePicker1.Text & "'" is the filter. The odd thing is ive used this exact filter before and never had this behavior, i'm stumped.
This is probably common question and I searched forums but didnfind the answer.I have two DateTimePickers on form and I want to use BindingSource.Filter to filter between two dates.I have tried this but it doesn work:
I've been trying to figure out how to use the CONTAINS clause for the last couple of days, on and off. The appropriate datatable is configured for full-text search, but whenever I run the program and come to the point where this query is run, I get this error "Syntax error: Missing operand after 'CONTAINS' operator.". Here is the code:[code]....
I've tried replacing the "*" with parenthesis, percentages, and deleting them, but it always gets the same result. What is the correct syntax to use the CONTAINS clause within the .filter query or is there some work around or something that I am missing?
I have a DataGridView that is bound to a datatable. I also have a combo box with sorting items in it. When the user selects a new item in the combo box, the DataBindingSource.filter is changed accordingly.
For the cell and row validation on the DataGridView, I set the row error text accordingly as opposed to displaying a message box.
Occasionally, when switching between items in the combo box, the datagridview gets filled with a bunch of empty rows that all have error messages. It seems it is validating the rows that existed from the previously selected filter against the new filter.
See attached image. I hope I am making myself clear.
I have a BindingSource that is my DataGridViews data source. I want to filter for all rows where column1 is blank. For example, one row may contain a null value, some rows may contain just white space, and other rows may contain text. How do I show just the rows with text (or numeric, or date) values?
Also, how do I filter for non-blank rows? This would show me all rows that contain a blank cell.
use dataset , bindingsource and table adabter to filter or serch on database and update the datagridview
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'TODO: This line of code loads data into the 'Database3DataSet1.Table3' table. You can
I'm having problems with bindingsource. I have a proc used to update a datagridview from a bindingsource. When I run the debugger, the datatable appears to be populated rowcount is 2206 and 7 columns. When the bindingsource.datasource is set, everything looks good. The filter appears to be ok, however, when the datagridview is set to the bindingsource, it's not working. I have it in a try/catch block and an error isn't being raised. When I reference the columns to size them, an error is raised. Below is the snippet of
i am currently working on a database project using Microsoft Access 2007 and VB Express 2008.my problem is, i want to create a searching function in one of my tables; table Coachee. I know that it is possible to search data using bindingsource.filter as i've already succeeded in doing that. The thing is, how do i actually prompt a messagebox saying that the record of the Coachee ID to be searched is not found? [code]
I am working on an app where a user can do various calculations for a number of different tasks, each task has its own unique Item ID.The calculations are done in dgv's and all calculations get captured in the one datatable.I wanted to filter the datatable based on multiple criteria, if possible, and bind it to the dgv so that the user is only working on the calculations pertaining to that particular task.From what I have read, a bindingsource would allow me to filter my data in this way.In the code below, I have binding source that I am trying to filter and then present that filtered view in a datagridview.I keep getting a syntax error at the bindingsource.filter line that says Syntax error: Missing operand after 'ID' operator.It's the first time I have tried this and I don't know what is causing it
I'm trying to filter all the records in my datatable that have a NULL value for one the fields in the table, I'd like the bindingsource to show only those records that have null values.
I'm using the filter method of Binding source in VB.net to filter results in a DataGridView based on the text in a search box. However, the idea of this search, is that it shows a row if any of the cells contain the text. So my filter string ends up looking like this:
i need some help here, i want a result that shown a total number from student who passed some subjects. Let say there are 8 student who got A in subject chemistry, then the output should display result something like " there are 8 students who got A in chemistry". And also is it possible to combined the result, for example i want the output something like "there are "X" students who got A in chemistry and physics". where "X" is variable (number). it should trigger when winform is loaded. im using bindingsource.filter, but failed. because using bindingsource.filter need the input from user then it produce the output. whereas i want the result shown when the winform is loaded. How can i achieve this.
have a query in SQL, returns the results I expect, however when I copied this query to a bindingsource.filter call,I get "Missing Operand" errors
Me.ItemsBindingSource.Filter = String.Format("SELECT * FROM items WHERE (GETDATE()) BETWEEN (items.ItemStartDate) AND DATEADD([month], items.ItemOccurances, items.ItemStartDate)")
Right now I am building a filter based on user input (textboxes and comboboxes) by a bunch of if statements. There must be a better way. Here is my current code:
Private Function BuildProductsFilter() As String Dim RawFilterResults As String = "" If Not CompanyNameComboBox.SelectedValue Is Nothing AndAlso Not
