Use WebBrowser Object In Thread's Operation (start Thread)

Jun 11, 2009

i want to have some web browsers which navigate wile the thread is running and my problem is that I want to use a web browser object from .net in a thread. when i put a webbrowser object in my form, called webbrowser1, i cant reach it in the thread's operation(start thread). when i type webbroeser1 in the thread it doesn't undrestand what webbrowser1 is.

View 5 Replies


ADVERTISEMENT

VS 2010 Error - Cross-Thread Operation Not Valid: Control TbPlaca1 Accessed From A Thread Other Than The Thread It Was Created On

Aug 13, 2010

In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"

Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()

[code]....

The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".

View 3 Replies

Cross-thread Operation Not Valid: Control 'Panel1' Accessed From A Thread Other Than The Thread It Was Created On." ?

Nov 3, 2011

This is the error message I am getting:

"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:

Panel1.Show()
Label1.Show()
Label2.Show()

why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.

View 4 Replies

Error - Cross-thread Operation Not Valid: Control 'txt1' Accessed From A Thread Other Than The Thread It Was Created On

Jul 21, 2009

I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.

Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()

[code]....

I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)

View 7 Replies

Error : Cross-thread Operation Not Valid: Control 'l_users' Accessed From A Thread Other Than The Thread It Was Created On

Jun 21, 2012

When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.

Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub

View 3 Replies

Threading Progress Bar In .net - Thread Operation Not Valid Control 'ProgressBar1' Accessed From A Thread Other Than The Thread It Was Created On

Feb 17, 2012

Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.

I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes

[Code]...

View 2 Replies

Cross-thread Operation Not Valid: Control 'Autocad' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2010

I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.

Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class

My main class loads frmCad as well as CadApp.

Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub

When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.

View 4 Replies

Cross-thread Operation Not Valid: Control 'label2' Accessed From A Thread Other Than The Thread It Was Created On?

Feb 9, 2011

My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.

[Code]...

View 8 Replies

Cross-thread Operation Not Valid: Control 'lblStatus' Accessed From A Thread Other Than The Thread It Was Created On

Apr 1, 2010

I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:

'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private

[code]....

View 3 Replies

Cross-thread Operation Not Valid: Control 'statusHO' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2009

My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.

System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:

[Code]...

i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.

So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details

View 1 Replies

Cross-thread Operation Not Valid: Control 'lv1' Accessed From A Thread Other Than The Thread It Was Created On?

Aug 4, 2009

Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.

Dim lvi As ListViewItem
For Each lvi In lv1.Items

[code]....

View 1 Replies

Error Saying "Cross-thread Operation Not Valid: Control 'lblOnline' Accessed From A Thread Other Than The Thread It Was Created On."?

Feb 7, 2011

Ok i have a Form with the following

Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")

[code].....

View 12 Replies

"Cross-thread Operation Not Valid: Control 'TextBox1' Accessed From A Thread?

Sep 18, 2009

When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."

View 13 Replies

Cross-thread Operation Not Valid Control 'FormSplash' Accessed From A Thread Other?

Sep 5, 2009

I need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""

I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?

View 1 Replies

Cross-thread Operation Not Valid Exception In Single Thread Application?

Nov 14, 2009

I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:

Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub

and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.

View 2 Replies

Cross-thread Operation Not Valid: Control 'FormSplash' Accessed From A Thread Other

Sep 5, 2009

In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.

View 1 Replies

Cross-thread Operation Not Valid: Control 'hiddenrtb2' Accessed From A Thread

Mar 10, 2010

im getting this error and i cant figure it out.

Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})

[code]....

View 1 Replies

Start New Thread As Soon As Previously Thread Gets Finished?

Jul 23, 2010

i have to develop windows service which will copy files to different servers.So i have to do this task using multi-theading.But i have to start only 3-4 threads.So whenever one threads get finished then i have to start new thread so that count of thread should remain 3 or 4

View 5 Replies

Error: The Calling Thread Cannot Access This Object Because A Different Thread Owns It

Nov 25, 2011

I have am using a Twitter streaming class library, and would like to update a listbox when a new tweet is posted. I have it all set up to the point where a message box will show when a tweet comes in, but when I try to insert this tweet into a listbox I get this error: The calling thread cannot access this object because a different thread owns it. I don't know what I need to do in order to insert this tweet.

View 4 Replies

Waiting For Threads - Thread.join Suspend Execution Of Code On Calling Thread Until Spawned Thread Finishes Or Is Aborted

Sep 2, 2010

My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...

With that in mind, I tried this:

For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)

[CODE]...

However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).

View 4 Replies

.net - Why Cancelling 6 WebRequest Using Task.Start Takes Longer That Thread.Start

Jul 24, 2011

I have custom asynchronous WebRequest class that I am testing to find out how fast the request will be cancelled and found some odd results, that starting 6 WebRequests with TPL and cancelling them right away takes 25 sec, but when I used just regular background threads it took only 5 sec.

Update: Running them without cancelling takes with Task.Start 9 sec and Thread.Start 3 sec accordingly.
Imports System.Net
Imports System.Threading

[Code]....

View 1 Replies

.net - How To Work Around Cross-thread Operation

May 14, 2011

I am creating a CHAT interface for my game (when networking, server/client style) and I ran into a little problem..The way it works... I have forms for the SERVER (frmServer) and CLIENTS (frmClient) each of them have a LISTBOX (lbChat) in which I input (lbChat.Items.Add(string)) text as the users type it - in essence a chatbox...

So, let's use the CLIENT as an example (as it is simpler and the concept the same in both client and server cases)The Client form (frmClient) creates a thread that is used to listen for chat messages (via TCP) - so what I did was pass the listbox itself (lbChat) to the thread thus (I thought) solving my problem of writing into the listbox when chat messages arrive (and are caught by the thread and not frmClient of course)Now while debugging the code I get the following exception when my thread attempts to write in the listbox (lbChat) of frmClient General Exception: System.InvalidOperationException: Cross-thread operation not valid: Control 'lbChat' accessed from a thread other than the thread it was created on.

So now the question is how do I work around this cross-thread exception? How do I pass information (chat text) from my listener threads (and there will be multiple of them in the field, one per client) to the centralized listbox (lbChat) on the form?I need some kind of method to transfer information while also reducing the chances of running into contention issues (do I need to use ReaderWriterLock?), thing is I have no clue how to accomplish this task (I thought simply passing in the listbox would allow me to write to it in each of the threads).

[Code]...

View 1 Replies

C# - IO Operation Is Blocking UI And Background Thread

Jun 29, 2011

I am a novice in Threads, but I want to know how to order thread execution in my scenario, and is the following :

UI Thread : Windows Form Background
Thread : Kind of print daemon
implemented with recursive methods
IO Operation : a StreamWriter that do
the job of File.AppendText()

When I execute my main app.exe, sometimes it launches the Windows Forms and the execution process in the task manager (app.exe), in some opportunities its just launches the execution process in background. How can I determine the behavior of launching UI, I have to establish a priority or somewhat else? Code: I'm using framework 2.0 and any answers could be writted in C# or Vb.Net.

View 1 Replies

Cross Thread Operation Detected

May 22, 2012

I am trying to load data using a backgroundworker using a code snippet that I found. I think that it would all work fine, except that I am getting an error that I am doing a cross thread operation. The task that I am trying to accomplish is loading data for a large dataset when a command (Run Operation) is called so that I can prepare the user that it may take a long time, and I can display a scrolling marque to show them that the program is not frozen. I am using a separate form to display the warning, an OK button, and a scrolling marque.[code]

View 2 Replies

Cross Thread Operation Not Valid

Oct 14, 2011

I am developing a application called filecopy(windows application). Inside the form1.vb i am having progressbar. Having one more class called FileCopy. inside the filecopy class i have DirectoryCopy method. it invoke the percentage calculation method(that is in form1.vb) for how many percentage is completed. Each and every time the value. Finally , the percentage value is assign to progressbar.value. AT that thime i am getting cross thread operation is not valid exectption. This is my code;

[Code]...

View 5 Replies

Cross Thread Operation Not Valid?

May 24, 2010

I may need to give you more info but I am not sure what! I have been using a print queue dll with good results but all of a sudden when I add label and try during the job added event to change the text value of this label I get a threading error!

"Cross-thread operation not valid: Control 'lblPagesT' accessed from a thread other than the thread it was created on."

Where can I go to learn about threading, why does it think its a seperate thread? is it cause its coming from the dll?

Private Sub pmon_JobAdded(ByVal sender As Object, ByVal e As PrinterQueueWatch.PrintJobEventArgs) Handles pmon.JobAdded
System.Threading.Thread.Sleep(1000)

[Code]....

View 3 Replies

Cross-Thread Operation Errors?

Mar 18, 2009

I keep recieving cross-thread operation errors, and have read that this is due to my need to change this application (VB.Net Telnet server) to be multithreaded.

View 1 Replies

Cross-thread Operation Not Valid

Jul 21, 2011

In response to a "Cross-thread operation not valid: Control 'RecordAddedTextBox' accessed from a thread other than the one it was created on." error I have added a routine obtained from Microsoft Help and that is giving me a compile error. This is my original

[Code]...

View 2 Replies

Cross-thread Operation Not Valid?

Nov 26, 2010

i am working in vb.net 2005 i have more than 10 vb forms and each form has number of textboxes, and maskedtextboxes, so i have to validate them all. i am using this way that on keypress event of textbox i use this code

[code]...

but this is very lengthy code, i mean that on each form i have almost 15 to 20 textboxes, and if i use the same code on each's textbox keypress event so it will be very very lengthy code. so please assist me that how i solve this problem? and how do i use the shortest code?

View 7 Replies

Cross-thread Operation Now Valid?

Aug 31, 2009

sData1 = SerialPort1.ReadExisting()
Label1.Text = sData1

i want to display sData1 in a label. What is the simple way of doing it?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved