I have a DataGridView that I'm loading into Excel through the use of an ADODB.Recordset. It works fine, except for a column I have that displays the time. Not the current time, but the time when a file was sent. It displays correctly in the DataGridView but displays 12:00 AM for every row in excel. I'm adding it to the DataGridView like this:
View 1 RepliesI am using Visual Studio 2008 and looking for an efficient and hopefully straightforward approach for exporting data from a DataGridView to Excel. If doable, my preference would be to export the data to Excel without instantiating an Excel application. I found some code on the Microsoft support site that is fairly accessible but the example shows how to export just a few pieces of data. Would someone be able to demonstrate how to modify this code to so that it could be used for large amounts of data (for example, data from a DataGridView).
'Establish a connection to the data source.
Dim sConnectionString As String
sConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
[code].....
i've made a small tool that searches an access DB in back end & dumps the results in a Datagridview, now i want to export those results to excel, after googling i found a code that does it for me , it's working partially for me. It writes the Headers to a new excel file but then for some reason i getting below error (on the blue line in code):
[Code]...
I am exporting a datagridview to a text file. The code to do this is: Public Sub WriteTextFile(ByVal dgv As DataGridView, ByVal varlbl As String)
[Code]...
I have a datagridview(DGV) which contains data based on a user selections from a pre-defined dataset
In point form:
User starts program
program builds datatable
user opens file and program read all data from file into the dataset.datatable
user defines the data they want to see
program displays datagrid based on dataset.datatable and user choices. (basically it displays the whole dataset and removes unwanted columns
ecords)
I want to be able to export the datagrid to excel (not sure which method yet). I have tried the excelexporter component i found somewhere on the msdn forums (it exports the data to look exactly like the datagridview) but its painfully slow. It exports something in the region of 100 records per minute. Most of the time, the datagridview can contain anywhere from 3000-32,000 records. As such, at 100 records per minute, the excel generation can take updwards of 50minutes. Unacceptably slow for the purposes of the program.
What do people recommend as the best method to quickly dump the contents of a datagrid into excel. By quickly, im talking at the speed of about 10,000 records per minute. In all honesty, anything over 5000 records per minute will be fast enough, but the quicker the better!
Is there a way of creating a new dataset.datatable that is built of the contents of the datagridview and then building an excel sheet by connecting to the new dataset?
I would like to be able to export to Excel 2000-2003 at a minimum, but if i can do excel 97 as well it won't hurt.
I have a problem in exporting data grid view to excel. The problem is while i export the contents are exporting but the 'column header' is not exporting to excel. can any one give me solution its urgent this the code which im using.[code]
View 5 RepliesI am filling a datagridview with very lengthy results. Roughly 60k rows on average. I am filling them via an oracle database using a table adapter. The records then have a filter placed on them in the datagridview so the results displayed are a bit different.
My problem: I built an export to excel function which populated a dataset and then red through it and wrote to excel. Bad idea with the amount of records I am using. I tried just writing the records straight to a csv file using streamwriter but I don't very much like this way.
My proposal: I would like to fill an array from the datagridview and then be able to dump the array into excel. However I am having some trouble finding examples on creating an array from a datagridview.
the logic of this has gotten the best of me. In my scheduling app the user creates schedules for 6 groups(RNAM, RNPM, NTechAm, NTechPM, WCAM, WCPM). The user can then preview each schedule in a DGV on a separate form. After previewing all 6 schedules they then export them one at a time to excel. I want to do after the first schedule is done, is keep the workbook open and add a new worksheet for each remaining group(total of 6 worksheets).
[Code]...
Should I do away with checking if the file exists and just create the workbook and keep it open and then add all 6 worksheets by exporting them 1 at a time.
I have a a DGV with the following fields:
FirstName
LastName
Address
Job
StaffNum
Nationality
DOB
Notes
Picture
FileName
Now my DGV has records in it and I try to export it to Excel File. Now it exports the the Column Names above but none of the records. My code is below.
Dim fs As New IO.StreamWriter("C:exported.xls", False)
fs.WriteLine("<?xml version=""1.0""?>")
fs.WriteLine("<?mso-application progid=""Excel.Sheet""?>")
fs.WriteLine("<ss:Workbook xmlns:ss=""urn:schemas-microsoft-com:office:spreadsheet"">")
fs.WriteLine("<ss:Styles>")
[Code] .....
I got this code from the MSDN forums from a link someone posted. They said they changed IntCol and it worked to incoude the records as well but I cant figure it out. When I hit Export it does prom,pt me to save the file and saves the Names above to excel sheet but none of the records.
I am working on a project that is able to display real time data from sensors from micro-controller. I am able to do so by sending the data through the serial port and then use vb 2005 to show the data. However, I want to save those data from vb 2005 to excel. How am I able to do it ? I am able to use vb to insert data to excel step by step, cell by cell using the following codes.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim oExcel As Object
Dim oBook As Object
Dim oSheet As Object
[code]....
Lets say TextBox1.Text and TextBox2.Text is my real time data. How do I save it to the excel sheet displaying the data in cell A2, A3, A4 when the time goes by. Eg. If I want to save TextBox1.Text to excel it would be, the data in the 1st seconds in cell A2, data in the 2nd seconds in A3, 3rd seconds A4, 4th seconds in A5, A6 and so on...
I have a datagridview which I would like to be able to export the information to an Excel spreadsheet, and be able to reload the information later on from a specified worksheet. Also, I'd like to avoid using Databases with Access etc because I am aware that some of the machines I'll be deploying the program on do not have Access installed and would not want to have to install it either.
View 7 RepliesI already exporting contents of my datagridview to excel and word but I need to format one of the column of my datagridview. That column is "Amount". In my datagridview, it displays like this "122234". I want to display all the value in that column in this format: "122,234.00". I already tried to format it to number("N") in my datagridview but when I exported it to excel and word, it shows no format.[code]
View 4 RepliesThe CLR has been unable to transition from COM context 0x1b3008 to COM context 0x1b3178 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time.To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during lonunning operations.
Sub ExportToExcel07()
Dim cnx As Data.SqlClient.SqlConnection = SqlCnx.SourceDB
[code].....
I need to export the contents of DataGridView into an Excel file. There is lot of discussion which I went thru and leaves me more confused now than before. I am using VS 2010 Express with Office 2007.
In the VB project reference components, I looked for Office components and did not find it there.
I have this code the exports datagridview from vb.net to ms excel, There should be a total at the end of the table in the ms excel after exporting it but my problem is I can't merge the cells for "Total".
View 2 Repliesi've a datagridview control populated with records from database. i've formatted certain cells of datagridview according to a condition. (i mean i've set the fore color and back color of cell). But when i export these datagridview contents to excel 2003, no cell colors will be appearing.
i'm developing desktop application with vb.net 2008 and excel 2003.
i've a datagridview control populated with records from database.i've formatted certain cells of datagridview according to a condition.(i mean i've set the fore color and back color of cell).But when i export these datagridview contents to excel 2003, no cell colors will be
View 3 RepliesI am unable to export my data into excel.
Dim sqlString As String = "spExportRateProfile" & Session("OfficeNumber") & "," & Session("SalesRepID")
Dim conn As SqlConnection = New SqlConnection(Utils.GetConfigKey("ConnectionStringVimas"))
conn.Open()[code]....
What do I need do after this to export my data to excel?
i need to export a query result to excel. I did it using a few methods but it seems that it is taking to long if loading large amount of data like 1000 rows. I did looping a datatable and write the values to excel via excel object 11.0. - 20 secs for 1000 rows exporting the data to CVS but i will have problems formatting the data. using copyfromrecordset using adodb. But they want it to be done in .net Are there any better and faster ways? Must be done programmatically using vb.net.
View 5 Replies** Edit - just thinking - I have this export code elsewhere in my application; testing it with blanks works fine. All the fields in the two forms are text fields. The only difference that I can see is that the form that is causing me a problem is based on a left join query from my database; the form that works is based on a flat table. Any ideas???
I have tried everything in my (very, very limited) knowledgebase for VB and am completely stumped. I'm sure the fix is simple, but no clue where to go. (I got this code from a site which I didn't make a note of, and cannot find it by doing a google search)...
The code listed below is supposed to export a datagrid view to CSV. It works fine - if, and only if - all the fields are populated. If one of my columns is blank, then I get a ""Conversion from type 'DBNull' to type 'String' is not valid." error. **Edited to provide exact error message
The code that's giving me a problem is the second IIf(intRowData < intColumnCount, strDelimiter, "").
[Code]...
I am working on exporting some data to a DataGrid (with no luck). So far I have:
[Code]...
When this runs, I get an error message that says: System.Data.OleDb.OleDbException: The Microsoft Jet database engine could not find the object 'Sheet'. Make sure the object exists and that you spell its name and the path name correctly. The excel file has only one sheet that is named "Sheet", and the location specified in the connection line is correct. Any ideas on why this may be happening?
How can I update an existing excel file? I want to change certain values already present in the excel file and I am using
Dim excelConnectionString As String = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:Test.xlsx;Extended Properties=""Excel 12.0 Xml;HRD=No"""
Dim excelConnection As New OleDbConnection(excelConnectionString)
[Code]....
I'm trying to export the content of a data grid to an Excel file. But here is my problem:
1. If I use a Data Grid which was set to allow Adding and Editing of columns ( this appeared the first time I add the control to the form) , the resulting excel file will show all the content of the data grid, except for the Headers ( Column names) .
2. If I use a Data grid which was set to disabled adding and editing of columns, the resulting excel file is lacking the bottom-most row of the data grid content. The Headers are also not included.
I cannot choose Option 1, since the data grid must not be editable by the user. I cannot choose option 2 since the last row is being omitted. Another thing is that the Column Names ( the data are coming from a MS Access File) are not added into the Excel File for both Option 1 and 2.
Here is the code I'm using. I found it from the net and tried changing the values of i and j but still I can't get the result I wanted.
For i = 0 To dgreport3.RowCount - 2
For j = 0 To dgreport3.ColumnCount - 1
xlWorkSheet.Cells(i + 1, j + 1) = _
dgreport3(j, i).Value.ToString()
Next
Next
Has anyone successfully transferred data into Excel with multiple spreadsheets?
View 2 RepliesI've made an application, that allows to export some data to an exisiting excel-file. Everything works fine on my system, but not on other OS where Visual Studio is not installed. The xls file is simply not being edited at all.[code]
View 1 Repliesim exporting the content of a datagridview to excel, i managed to do that, but i want that after i succesfully completed the export process to open excel to see that file. heres some code im using to export to excel:rutabd = source of the databasesqlexport = the sql string query to select the items
[Code]...
I am new to vb. I have just downloaded VB 2008 Express Edition. All i want to do. Is have a couple of data entry boxes and and open a new worksheet with the data entered.
View 4 RepliesI am using the code below to export records in a datatable to an excel file using EPPlus.
Dim excelPackage = New ExcelPackage
Dim excelWorksheet = excelPackage.Workbook.Worksheets.Add("DemoPage")
excelWorksheet.Cells("A1").LoadFromDataTable(dt, True)[code]....
However, after walking through the code block, at Response.End(), I get an exception {Property evaluation failed.}
Update:
The error log is:
ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Reporting.Page_Load(Object sender, EventArgs e) in C:Reporting.aspx.vb:line 38
I am trying to export an excel file directory into an Oracle table as opposed to looping through the range and executing a lot of insert statements. I would think that there are better ways to accomplish this in .NET but I can't seem to find any other answer besides convert excel to csv & load it using Sql Loader or External Table. Does anyone know a cleaner & more efficient way that looping through the ranges creating & executing insert statements?
View 3 RepliesI am trying to gather some information about exporting data contained in a datagrid to an excel spreadsheet. I am not using ASP. The number of rows and columns are not set(fixed). If someone was able to point me in the right direction or even better a quick example. I have search through previous threads and am unable to find any that relate to exporting from a datagrid on a windows form to an excel document.
View 15 Replies