I would like this button:
Private Sub Button39_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button39.Click
End Sub
To add this registery key:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerHideDesktopIconsNewStartPanel]
"{871C5380-42A0-1069-A2EA-08002B30309D}"=-
how do i write to the windows registry and read from the registry?i'm using windows 7 - 64 bits, and visual studio 2008.
View 1 RepliesI have a few .reg files that I would like to be able to call from my app. How can I call these .reg files from an OnClick event? Is there a better way that I can do this?
View 3 RepliesI have a batch file with the following code which works fine[code]...
I would like to execute it from within the .net environment, however I can't seem to execute that command using the shell syntax.I tried Shell (cmd "MsiExec.exe /x {3248F0A8-6813-11D6-A77B-00B0D0150070}",vbHide)
I have run into a brick wall here with trying to figure this out what I have is a button that when clicked on opens up the windows control panel. and then options can be set and you then close the control panel.
then there is two radio buttons one says enabled and one says disabled what they do is check the registry after the button has been clicked on and depending on if the registry is set for 0 or 2 0 for disabled 2 for enabled...
I've tried various ways but I cannot get the radio buttons to check properly
I have little MD5 Check Sum app, and I want if i click on some file in the entire Windows OS, with right button, in the context menu there to be a button "Check MD5 Sum". Like when you install WinRar, the app assign values there for archive, and extracting.
View 1 RepliesI have a program that when you press a button it maps 2 drives, updates a registry value and then starts a executable which is stored in a SQL table. I'm having issues after the file opens. The program it opens does not seem to be working quite right. When you open the program by clicking on the .exe it works file.When I call it from the app, I have issues with the program after it opens. Can someone explain to me the difference between double clicking an .exe and using process.start? Is there a different way to do it? My code is listed below.
[Code]...
Error is coming Registry Access is not allowed.While Opening a Key.
Code:
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
NewDelete("HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun", "Sonia")
End Sub
[CODE]...
I've had a bit of a look around the net and on the forums but I've yet to find an answer to my question. I've got Visual Basic 2008 Express and I'm trying to write some registry entries, I can write strings fine just using
[Code]...
I am trying to code a delete button for a browsing program based on data from a txt file. I have coded the buttons to sort(ascending and descending), append to the text file, search the text file, but I can not seem to get the delete function working. I am using VB 2010, this is what I have so far:
Code:
Dim deleline As String
Dim line As String
Dim isFound As Boolean = False
sr4 = IO.File.OpenText("Students.txt")
[code]....
I'm trying to add functionality to my application that will disable buttons and checkboxes depending on what version the OS is when the app is launched. I made a test app to test this but unfortunately I can not get it to work. Here is my code:
'OS Check
Dim osValue As Object
osValue =
My.Computer.Registry.GetValue("HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrent Version", "CurrentVersion", "5.2")
[Code]...
*Note - 5.2 is Windows 2003, 6.0 is Vista, 5.1 is Windows XP
Currently, I am try to get the email addresses that have been saved or stored by the user of the computer. This isn't the emails that the user has sent or received, or the contacts he/she has in his address book. Just simply the email accounts that have been accessed from the computer.I know that there are some locations stored in the registry that have the email account. The email addresses that are used on the current computer. I just can't seem to find them on my computer.I am not sure if the registry is the only place to find it or if it stored on the web browser such as internet explorer or google chrome.
View 1 RepliesI am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
In this key:
Code:
HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{4D36E978-E325-11CE-BFC1-08002BE10318}
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
I am using VB.net 2008 and Windows XP.
I have several programs that must write to HKLM in XP and Windows 7/64 Pro.The programs work in VB6 but not in VB.Net 2008 on target machines. It does works on our development machine. [code]I just cannot figure out why VB6 works but .net doesn't and fails only on the target machine not the development machine.
View 2 RepliesHow can I change the permissions of a registry key. I want to allow anyone in the "Users" group to be able to write to "SOFTWAREMyApp".
View 2 RepliesI want to get every single registry Name and value, which lies in HKEY_CURRENT_USER....Run(for getting and THEN deleting them to prevent run those programs at windows start). This is just for getting names.
Imports Microsoft.Win32
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click[code].....
Well, this isnt working, when i run it in the vb and click button, it says system missing member exception: IWshShell3 hasnt been found.
Does anyone know how to use the registry section in Inno Setup to add a registry key that make a program start with windows when a Checkbox is checked in the setup wizard? If anyone know please step forward. I am getting near the launch of a program and it would be nice to include this feature.
View 5 Repliesi made this Reg key with this code.
Registry.SetValue("HKEY_CURRENT_USERSoftwareapp", "Sample", "001010101")
I'm trying to delete the Name of the Key and the value only with this
My.Computer.Registry.CurrentUser.DeleteValue("Softwareapp")
But i think this will delete the folder and not only one key Do you know a code that would only delete
"HKEY_CURRENT_USERSoftwareapp", "Sample", "001010101")
I've got a .reg file and I want to add it to the registry when the user clicks a button. I've been searching the forums and I've seen allot of ways to do it without the .reg file, instead taking the values and putting them in the correct syntax, but I already have the .reg file and it would take far too much effort to place all the values in the correct syntax (The amount of values is huge). What is the code to do this? Do I have to somehow add the .reg file to the project?
View 1 RepliesI need to be able to change a line in the regisrty an am not sure how to go about it, i have searched but nothing i can understand at the moment.
HKCU,"SOFTWAREMicrosoftInternet ExplorerDesktopGeneral","Wallpaper",0x00020000,"%SYSTEMDRIVE%WebDreamSceneBeach.html"
The part in bold is the part i need to be able to change as i am having to write a little program to change the background on the desktop.
I'm trying to determine the framework version that is installed via the registry. When poking around, I found this key: HKLMSOFTWAREMicrosoft.NETFrameworkPolicyv4.0 I've created the following function to determine if the key exists:
[Code]...
I've verified the key exists, but it keeps returning False.
Ok, so i have an application which you have the chooice to register or use a trial of it(this options comes up in the installer)If the user chooses to use the 30 day free trial, the installer writes the date of the install to the registry. How do i make it so it will add 30 days to todays date, ready to be written to the registry? VB Dim EndDate as DateDim CurrentDate as Date = Date.Today.Day & "." & Date.Today.Month & "." & Date.Today.YearEndDate = CurrentDate - 'This is the bit i need help withregkey.SetValue("End Date", EndDate, RegistryValueKind.String)
View 3 RepliesI have a section of code that will compile perfectly using VB Studio 2003, but it throws a InvalidCast Exception under VB 2005/2008. The code throws an Invalid Cast exception at KeyHandle = e(field.GetValue(KeyToMonitor) line below, and as far as I can tell it is because the variable Field is passing the string Microsoft.Win32.SafeHandles.SafeRegistryHandle rather than an integer. Is this because of safe keys in VB 2005 and 2008?
how to call the handle of the registry key opened in a way compatible with Safe Keys? I'm using the code to notify when a registry key is changed using RegNotifyChangeKeyValue.
Private Function WaitForChange() As Boolean
Dim notifyEvent As New Threading.AutoResetEvent(False)
Dim KeyHandle As IntPtr
[Code].....
VB.NET Private gpo_office_hklm As String = "SOFTWAREPoliciesMicrosoftOffice12.0OutlookSecurity"
Private gpo_winupdate_hklm As String = "SOFTWAREPoliciesMicrosoftWindowsWindowsUpdateAU"
Private gpo_activedesktop_hklm As String = "SOFTWAREMicrosoftWindowsCurrentVersionPoliciesActiveDesktop"
Private gpo_explorer_hklm As String = "SOFTWAREMicrosoftWindowsCurrentVersionPoliciesExplorer"
Private gpo_system_hklm As String = "SOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem"
Private Sub EnumerateKeysHKLM(ByVal lvw As ListView)
[Code]...
Normally, that exception is thrown when an object's value is Nothing. However, I've been through each subkey manually and everyone has a name. The only one I could think of that doesn't, are the (Default) keys.
The issue is that I can't seem to figure out how to loop through the subkeys and check if they're nothing. If I create a loop and call ".GetSubKeyNames() to check if they're Nothing, I still get the exception because it attempts to get the names before I can even check them.
I am trying to import some hex data into the registry with my program.
Instead of importing it as a binary type, I need to import it as RegistryValueKind.ExpandString. What is the proper way to convert this over to import it?
VS 2008 How to back up registry?
View 3 Replieshow do i read from registry, i want my program to do this once u open it it reads the registry for a number 1 means non-active 1.2 means active i its active it bring you to form 2 if not it just stays t form 1
View 6 RepliesDim rk As Microsoft.Win32.RegistryKey
rk = My.Computer.Registry.CurrentUser.OpenSubKey("SYSTEMCurrentControlSetControlSession ManagerBootExecute", True)
rk.SetValue("BootExecute", "autocheck autochk /p ??C:")
I'm trying to make a application that will start "Check Disk " on boot time.But i get this error
Object reference not set to an instance of an object.
i want to know what is the best way to write into the registry.for example: i created an application named (App1) . is this application will going to create value in the registry when i install it in any machine? and where?if so then i want to save a few settings for this program let's say the path of temporary files for this program .so what is the best way to do this? save it in the application settings or save it into the registry?
View 8 RepliesCan I edit the registry in Visual Studio 2008? If so does anyone have a link to any code that I could look through?
View 3 Replies