I have a function that requires 10-15 min to run. Due to sheer amount of time required to run this function, my form freezes and the user is left clue-less about what is happening to the program. I understand that this problem can be overcome using Background class and Progress bar.
View 8 RepliesI am using the code below to login to a softphone. However, the login progess is a long process as there are many things that have to be initialized and checks to be made, I have only put a few on here, as it would make the code to long to post.In the code below I am checking if the CancellationPending if the CancelAsync has been called in my cancel button click event, before doing each check. Is this correct? Also if the check fails I also call the CancelAsync and set the e.Cancel to true.
Private Sub bgwProcessLogin_DoWork(ByVal sender As Object, ByVal e As DoWorkEventArgs)
'
' * Perform at test to see if the background worker has been
[code].....
get the progress bar show the progress of the batchfile running in the background?
View 10 Repliesmy backgroundworker as I just cant get it to work. Basically I have a backgroundworker which does a few tasks but I'm trying to implement a progress bar and a label. I'm going to set the maximum value of the progress bar to 10 and then have it updating as I move with each task, also I'm thinking of a label with the progress bar which will display the progress ie
[Code]...
I'am trying to make app that will show every file in C:[code]Now how can i add progress bar with the background worker.
View 31 RepliesI have a backgroundworker which does a few tasks but I'm trying to implement a progress bar and a label. I'm going to set the maximum value of the progress bar to 10 and then have it updating as I move with each task, also I'm thinking of a label with the progress bar which will display the progress ie [code]
View 3 RepliesI am developing a VB application along with MS Access... When I initially load my form I need to put my application to sleep for 3 seconds or else data wont load properly. So for this 3 seconds I would like to show a progress bar displaying a message "Please wait" I tried using background worker but did not find any success... I have gone through many tutorials but for some reason could not accomplish the task.
View 4 RepliesI just can't see what I am doing wrong here, since I have implemented a progress bar into my background worker it no longer only runs the once (in some cases I have seen the coding within the foor loop run 6 times)
My coding:-
My progress bar max value is set to 10.
BGWorker Do Work Event
[code]....
I am using a background worker to update a progress bar while inserting data in a database.
Private Sub InsertintoDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InsertintoDB.Click
BackgroundWorker1.RunWorkerAsync()
[Code]....
the error i m getting is exception has been thrown by the target of an invocation.
I have searched the forum and found several forums related to the backgroundworker thread but have been unsuccessful in finding my answer.My objective is to display an animated gif or progress bar while the program is executing a particular method which can take upwards of several minutes to complete. I cannot get the second thread to run the progress bar while the main progrem is executing the time consuming method. I have created a demo based on another thread and can't seem to get it to create two threads. I was attempting to get the backgroundworker to execute the progress bar while my main code runs on UI thread.
[Code]...
i am trying to figure out how to copy a file in the background and monitor its progress.
in VB6 i used the FileCopyEX API
so i wrote a quick application in VB6 that used the API, then opened it in VB2008, so it ran the upgrade wizard
i get one error message after the wizard runs
'UPGRADE_ISSUE: Declaring a parameter 'As Any' is not supported. Click for more: 'ms-help://MS.VSCC.v90/dv_commoner/local/redirect.htm?keyword="FAE78A8D-8978-4FD4-8208-5B7324A8F795"'
Public Declare Function CopyFileEx Lib "kernel32.dll" Alias "CopyFileExA"(ByVal lpExistingFileName As String, ByVal lpNewFileName As String, ByVal lpProgressRoutine As Integer, ByRef lpData As Any, ByRef pbCancel As Integer, ByVal dwCopyFlags As Integer) As Integer
How to use the background workers in my case. while my web cam is trying to start i want to show a progress bar.
Private Sub strcam_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles strcam.Click
mycam.startCam(PictureBox1.Handle.ToInt32)
End Sub
I tried many methods to achieve that without any luck. I tried also application.doevents().
I have a gif image that shows a circle go round like the one on vista. However when i use the application.doevents() the circle is shown BUT it start go round only when the web cam starts....I don`t know what to do.....I need somehow to perform two tasks at the same time. Can bagroundworkers used in this case or i need to do something else?
I'm creating a program that can run a large audio file (*.wav) in a seperate thread using the background worker, the only problem I'm having is trying to report the progress using a progress bar. When I try to report progress nothing happens. here is the code below:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
BackgroundWorker1.RunWorkerAsync()
[Code].....
I was looking for a solution to run a lengthy job (looking for files on the fixed drives) withouth freezing the UI, and saw that using a BackGroundWorker control is the recommended solution.
Problem is, I don't see its ProgressChange event being triggered:
Imports System.IO Imports System.Text.RegularExpressions
Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Button1.Enabled = False
[Code]...
This is what I want, I have 12 progress bars and I want to run a background task to ping IPs and if it can ping them it starts a timer is this imposable to do?
View 4 RepliesI am using background worker to report progress on the screen. In the Main.vb I have the following
Public Sub report(ByVal sender As System.Object, ByVal e As System.ComponentModel.ProgressChangedEventArgs) Handles bwlistener.ProgressChanged
Dim message As String = e.UserState
logRTB.AppendText(message & vbCrLf)
End Sub
When I call this from Main.vb I use:
bwlistener.ReportProgress(0, "Some status text goes here")
It works great. The problem is when I try to call it from any other module in my project.
When I call it OtherFile.vb:
Main.bwlistener.ReportProgress(0, "Some status text goes here")
It doesn't work... The program doesn't crash. Debug goes through everything but no output is actually shown to the end user.
I am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
frmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
I have a program that downloads information from another class, specifically it collects domain names.So i have a class called domainscraper....on my main form I have a background worker and progressbar, and i put this in the dowork event:DomainCollector.GetDomainsByMethod(parameter)Now my question is, how could I report progress to my progress bar on form1.vb from that method I use in the the domainscraper class (domainscraper.vb).
View 5 RepliesI am wondering how do I update a Progress Bar that resides in Form1 (for example) from a newly created class called from the Button in Form1. I have read several tutorial about backgroundworker. Most of the googled tutorials have their "long process code" in the do_work event. I have tried them and got it working from within the form itself.
However, there are 2 parts (long process) in which I wish to incorporate the updating of the progress bar; First one being a long sub routine that is in the main form (Form1). The second one is another long processing function that resides in a class. It is the second one that is giving the problem as I have no idea how to call the backgroundworker.reportProgress() to update the UI.
Here is the sample flowchart that I have created for the second long processing function:
I wish to insert a new instruction that says "Update the Progress bar that is in Form1" after the current instruction "Store the member into a collection".
Ok, I have a usercontrol in a Class Library Projects which contains a Button, 2 Listboxes, and a Progress bar. My code is to look for a file and if its there post to one listbox and fill in the progress bar and also put the programs current task in the other listbox. Recently, I started using VB.Net 2010 Express and wanted to turn part of a form into a .dll so it would be easier to update. I started getting a error and had to declare a variable as a New instance of UserControL1 (my user control). When I did this, the control would run, but the Progress Bar doesn't fill and neither of my listboxes show anything. What Should I do?
View 1 RepliesSOrry for long title i've forgotten how to do this so please may i have a code im new to VB 2008
View 3 RepliesI am having difficulty uploading a file using a background worker class...I've noticed that it is unable to transfer files like "mp3" ".exe" and others...although my application works fine on ".txt" and '.doc" and similar types otherwise it throws the following error following is my code for FTP...Also would like to know that the builtin FTP libraries are capable enough to make a FTP class application with RESUME capability? my files can be huge like 80MB to 100MB. [code]
View 3 RepliesHas any one used BITs in VB.NET? If so, do you have code samples? I was looking at SharpBits but I have a VB project that I wanted to use BITS for. Is it possible to use it with my VB.NET program? (.NET 2.0) I was tempted to try to convert each class to VB.NET in the SharpBits.Base folder but figured I'd ask in case someone has headed down this route before.
In case you run across this question. What you can do is in the Sharpbits.Base folder (that you download from codeplex) there is a DLL you can reference in the Bin directory. You can add that into your references to access it. Marking Konrad as answer since he was kind enough to post.
I managed to get sharpbits working with some quick code which I pasted below for anyone who might stumble upon this question. Like I mentioned above add the DLL to your project.
Dim b As New SharpBits.Base.BitsManager
Dim mynewjob As SharpBits.Base.BitsJob = _
b.CreateJob("jobname", SharpBits.Base.JobType.Download)
mynewjob.AddFile("\servershareigfile.zip", "c:igfile.zip")
mynewjob.Resume()
You'll need to write some logic to check for the status of the job. Once it hits "Transferred" status you can then mark it as complete. This will write the file from a .bin to the file name you listed. Something that helped me was installing the Windows Support Tools (you can get it from a Windows 2003 Cd/DVD in the sup tools folder)and using Bitsadmin.exe to view the status of the job while debugging.
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
I have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesLooked through many tuts, can't find one.
View 1 RepliesI have a filesystemwatcher which place files in a queue when they are created. From the queue the files are further processed (xml into SQL database).
The mechanism works fine, but I want to add a progress bar to follow the progress of the files in the queue: processing 1 of 10......2 of 10......3 of 10 etc.For testing, I created a batch file to simulate the creation of files, so the filesystemwatcher can to his work and place the files in the queue. When I tell the batchfile to simulate the creation of 20 files, I see that the amount of files in the queue change. For example;
[code]...
In the app I'm currently making, I have two progress bars. One for current task being committed and the other is for overall progress.During runtime, I calculate how many tasks are being run and set that as the maximum. As each task completes, the progress bar is incremented by one.
I want the current task progress bar to show the progress of the current task. Some tasks can take a few minutes to complete so that progress bar works great. But, if the task is super quick, like editing registry keys, I see no progress at all.When I edit the registry, it basically goes like this:
'Edit Key
'x
'x
'x
ProgressBar1.PerformStep()[code].....
It completes so quickly that I never see the bar even move.I also have each task report its name into a label and it skips ahead so quickly that I only see the first task name and the last.Is there any way to make this do a better job at reporting the progress?