VS 2008 Calculate Points On Line?
Feb 23, 2012
Using the attached code, the goal is to draw a series of 1x1 rectangles to produce an image of a line. The image begins okay at point (0,0) but ends up after 5600 passes through the loop at (1884,5273) instead of at (1965, 5244). To prove the scale factor accurate I also use Drawline to draw the entire line with the same scale factor. Drawline ends up at the correct location (1965,5244).
I've manually checked the calculations with the results as noted. I'm at a total loss to understand what's going on.
' Xc = 1965
' Xp = 0
' Yc = 5244
[Code]....
View 2 Replies
ADVERTISEMENT
Jan 3, 2012
I have a picture in my picturebox. In that picture, I need to draw a straight line between two points and calculate the length of that line (probably in pixels). Is there any suggestion how to do it?
View 2 Replies
Feb 27, 2012
A couple of options seem to be available to achieve better accuracy and shorter periods than the Timer control in VB allows, however they too seem to have their own unique drawbacks. I am trying to plot (draw) points that are calculated in my VB application and then represent them in real time with an accuracy of a couple percent. If VB can calculate the points in the microsecond time range, would it be reasonable to hang an external pulse source on a usb port and use the "Datachanged" event to count the pulses that will be summed and used to plot the points?Ultimately, this is a machine control application that requires "reasonably precise" timing - ie. CNC type control. The points are scaled and drawn and then step and direction signals are sent out through another USB port.
View 2 Replies
Apr 27, 2009
I been having trouble with my code for week can i please get some advice on how to make my code work. it keeps saying that .[code]...
View 6 Replies
May 13, 2009
I have a question about drawing lines. Most of the code snippets I've seen approach drawing a line with the mouse down as the startpoint and the mouse up as the endpoint. But I am trying to draw a line by startpoint as
a mouse click and then an endpoint as a mouse click just as you do on a typical cad program.
View 8 Replies
Jul 15, 2010
I have data in data table like below.
I am trying to make graph like below using asp.net chart control (made graph in excel with some test data)
points are X and Y values. lines are linear, exponential, logarithmic and power values.
So how can I make this chart in asp.net (vb.net or c#)?
View 1 Replies
Jul 22, 2010
[Code]...
If someone could post some sample code, in either c# or vb.net that would be much appreciated.
View 1 Replies
Mar 14, 2009
currently i dont have any code to show but i am curently creating an application on a windows mobile 5 device and wondered how i can plot a route manually....ie what i want to be able to do is use the stylus to touch somewhere on the screen and plot that as point A, then touch the screen somewhere else and plot that as Point B (in some sort of database) so that i can review that route afterwards
View 1 Replies
Jul 19, 2009
Currently there are functions to draw line or move to points, commonly known as LineTo(x,y) of MoveTo(x,y). I am wondering if there is also a LineTO or MoveTo function(s) for 3D, i.e. LineTo(x,y,z) or MoveTo(x,y,z).
View 1 Replies
Jul 25, 2010
I have a program where I have to calculate straight-line depreciation (cost * 1/n) n being the number of years to depreciate, and Double-Declining depreciation (cost * 2/n) using user input for year of purchase, cost, and years of depreciation. The output needs to be put into 4 columns in a list box. Year, Value at beginning of year, Amount of depreciation during the year and Total depreciation to the end of the year.
The problem I am having is with my loop. It is not properly calculating. I'm sure I am doing something wrong that is simple, but I can't see it.
Here is my code; the problem areas are bold:
Public Class frmDepreciation
Dim Cost, Life, Year, Depreciation, BegValue, EndValue, Total, Counter As Double
Dim fmtStr As String = "{0,-10}{1,10}{2,17}{3,5}{4,-15}"
Dim fmtStr2 As String = "{0,-10}{1,10}{2,17}{3,15}"
[CODE]....
View 3 Replies
Jun 18, 2012
I am trying to calculate the time difference between two points in time. I am using: Environment.TickCount.I set a long variable to the Environment.TickCount and then a second long variable to Environment.TickCount at a later point in time. I then subtract the second long variable from the first long variable, yet an incorrect difference is returned.
View 2 Replies
Apr 4, 2010
I need to load and parse a text file and extract data between points on any given line. I can load the file, but it's the parsing that's giving me headaches. e.g. "Phoned Jim and arranged for John to attend site" First I need to search for "Phoned" because the line always starts with that, and then I need to extract "Jim and arranged for John"
[Code]....
View 5 Replies
Mar 21, 2011
I am trying to find some algorithms or formulas for doing a fillet or blend operation on the intersection of an arc and a line segment given a particular radius. In other words, I need to find the equation for the circle that will have tangent points on both the line and the arc. Eventually, this has to be calculated using VB.Net
View 1 Replies
May 17, 2010
I have a DataGridView with two columns, X and Y, which are the X and Y coordinates. What I am trying to do is to let the user input some X and Y coordinates, and it will calculate the best fit line.
View 5 Replies
Apr 20, 2010
is there a way to offset the points in a polygon without having to change each one individually the points are in an array
View 2 Replies
Oct 20, 2011
I Have created a program (see below) that enables you to use you cam. You then draw a line and calculate the angle. The purpose is that I do alot of work with remote control cars and need to acuratley set toe and camber angles, it takes to long with the "old" method So I am creating this little program. ok, so, lets see what I want to do. Well, the first thing I would like to do is draw a line from top to bottom of my picture box dead center of left to right, this is dead center of the cam so the bottom of your item should be posistioned to meet the bottom of the centre line. I then draw a line from bottom to top of the objects angle. I then use the dead center line and the line I drew to calculate the angle.
[Code]...
View 19 Replies
Oct 14, 2011
what i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
View 3 Replies
Jul 5, 2010
I am trying to read in a TextBox line by line and take the first 7 characters of each line and output everything in another TextBox.This is what I have so far.
Dim line, lines() As String
lines = TextBox1.Text.Split(Environment.NewLine)
Dim i As Integer = 0
[code].....
View 1 Replies
Dec 26, 2009
I was wondering if there's a way to add points to something defined like this
[Code]....
View 8 Replies
Mar 30, 2011
How can I calculate the bounding rectangle of an ellipse using 4 points on the ellipse?
View 1 Replies
Jul 26, 2010
The picture is a graphicspath drawing a curve through the specified green dots... the red points are the Bezier points that are auto generated by the graphics path.
Basically I want to pass in an array of points (in this case the green dots in the pic) and get an array back of the Bezier (red points) - I want to calculate the location of these points MANUALLY - and not use the graphicspath object to work it out.
It doesn't have to be exactly the same just similar.
View 7 Replies
Jan 31, 2010
how can i get the points which make a polygon from a region which was derived from the polygon's points?
View 1 Replies
Aug 21, 2009
Why my math keeps getting rounded to 0 decimal points by default?When I do this I get return value of 1
Private Sub Button4_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim numb1 As Integer
numb1 = 100 / 78
MsgBox(numb1)
End Sub
How to get that value up to two decimal points (like 0.00)?
View 1 Replies
Mar 30, 2009
I am trying to calculate the number of years for my calculate age event handler, however i am apparently missing a method or whatnot because im trying to calculate the age , can anyone suggest help on this. I need to subtract years to get my age but when i try the birthdate.Subtract (currentDate) method i get an error about not able to convert from LONG?
So below is what I have.
Private Sub btnCalculateAge_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalculateAge.Click
Dim currentDate As Date
Dim BirthDate As Date
Dim Age As Long
[CODE]
View 7 Replies
Mar 17, 2010
I'm trying to read a file line by line into an array but It skips the item at index:3 I have it msgboxing just to make sure and it wont even touch it.
Dim Btn As Button = DirectCast(sender, Button)
Dim path As String = Application.StartupPath & "Libraries" & Btn.Text.Replace(" ", "_") & ".ipt"
Dim i As Integer = 0
Dim lines As String() = IO.File.ReadAllLines(path)
[code]....
View 3 Replies
Jul 8, 2010
Is there an easy way to consume xml to access any of the nodes directly without reading line by line?Here is a sample set of the xml working with. It contains two records of data. I am trying to find a way to load it so if I wanted to get say PostalCode and say Site SID value quickly.
HTML
<?xml version="1.0" encoding="utf-8"?><MainSite><MainSites Found="201" Returned="20" Status="0"><Site SID="123456"><Relevance>0.985</Relevance><Title>JDoe</Title><DateModified Date="2010-01-29T01:05:00">1/29/2010</DateModified><DateCreated Date="2010-01-29T01:05:00">1/29/2010</DateCreated><PersonalData><Confidential>0</Confidential><Name><First>John</First><Middle>
[code]....
View 12 Replies
Sep 8, 2009
i have three textbox in my program
How do i update my textbox3 Data like this
textbox3 line1 = textbox1 line1 + textbox2 line1
textbox3 line2 = textbox1 line2 + textbox2 line2
textbox3 line3 = textbox1 line3 + textbox2 line3
textbox3 line4 = textbox1 line4 + textbox2 line4
textbox3 line5 = textbox1 line5 + textbox2 line5
View 2 Replies
May 29, 2010
I am using WebBrowser1.DocumentText to get a websites source code, and then parse a string. I am trying to view the source line by line, and doing it as follows:
[Code]...
However what is displayed is each character from the source code, rather than the line. I am making the client log into a website, and the needed value from the source code is then parsed, so I need to use the WebBrowser type to get the source code.
View 2 Replies
May 8, 2011
I am developing a program where i will download and save an xml file from a url as abc.xml. I open the abc.xml in a datagridview with a dataset without problem.I am confused how can i read raw per raw the datagridview and assign the data in a database table? i am using vb 2008 + msde2005 express.I show the whole content of the xml file in the datagridview with the following [code]I dont know how to create a loop where i can read the datagridview line by line save data in variables (ex.strings) and save it in a databese table?
View 6 Replies
Aug 13, 2011
I have a couple of VB6 programs which work 100%, however not under W7, so I need to upgrade them to Visual studio 2008 pro which I own a copy of.The VB6 software used to open a file, read in a line of data and process it then save it in a new file, before going on to the next line input.I need to convert this process to VS2008 pro and can't get my head around it..... getting old you see.I also have a few other needs to do with file handling, but I may be able to sort them myself if I get a start with the above problem....
View 17 Replies
