i was wondering if i can make it so when you click a button that it does the following:
Click Button:
1.Looks inside a certain area to find a picture
2.If picture/image/icon found, then
3.Move the mouse over the picture/image/icon
4.Click mouse
In my project's Main form I have a picture box of size 1024*1024 which occupies almost 75% of my monitor screen. Now I have defined Picture box Mouse movement event with corresponding actions to be done for mouse mouse event over picture box. Now the problem is I have another button on my main form by pressing which an another form of size 520*170 pops up. I have set Me.Topmost property to this form. But even then if by I hover the mouse over picture box, this pop up form disappears (i.e. goes to back screen) and if at all i have to perform any action on this form I need click the Tab of the popped window on the task bar which makes this form visible. Worst case is if the user drags this form on top of the picture box and looses focus, then its impossible to get it(focus) back.
View 3 RepliesI'm making a game and I want to select a picturebox while the program is running. Then I want to make it move with I think the mouse click event. How do I go about doing this?
View 2 RepliesI have put a fair few hours into this now and have had no luck, i found this piece of code on the net that seems to offer exactly what i need.[code]...
View 6 RepliesIf I put this code in the form, the mouse will be moved once. I want it to "freeze" the mouse at the point that its moved at. If I put code in timer (which it is now), the mouse will keep searching for the color, so the mouse moves around like crazy. How do I change my code so that it will "freeze" the mouse once it finds the color? [Code]
View 11 Repliesokay i have a simple form like this How can i Move my mouse to the Red part in the Middle of the form i know it's something to do with Pixels but i don't know how to do that if anyone could answer my question i would be so happy so please if you know Please
View 1 Repliesi would like to write a function that when i click a button, the monitor will go in to standby mode, and then when i press the keyboard, it will wake up, but i do not the mouse wake up my monitor, how can i prevent my mouse wake up my monitor or how can i disable the mouse move?
View 2 RepliesI would like to capture a mouse move event, no matter what is under the mouse. I added a browser to my form, but the mouse move event isn't captured when the mouse moves over the browser.how can I add this event no matter what?
View 3 RepliesHow would I get my mouse to move to a certain color using VB? Also, how would I "Center" the cursor? I want to be able to use this even when mouse isnt in form
View 4 Replieshow can i move my Mouse to a Image ? i know how to move it to a pixel this is my code to move the mouse to the Pixel
Public Class aim
Function ScreenshotForm() As Bitmap
Dim bmp As New Bitmap(Me.Width, Me.Height)
[Code]...
but is there anyway to have it move the Mouse to a Image i want ? i have seen it Done before in vb 2008 say my form looks like this
after i click the button i want it to move the mouse to the picture of the "A"
As seen below in the screenshot I used the following code to draw a line from CA to CA 1.1
g = pbxMap.CreateGraphics
g.DrawLine(pen1, D.v(path(t)).x, D.v(path(t)).y, D.v(path(K)).x, D.v(path(K)).y)
Is there anyway to make the red picturebox at CA to move along the line drawn to CA 1.1? Something like the google driving directions where a car will moving along the path from a starting point to a ending point..
I need to be able to move it up with the up arrow key, down with the down arrow key, left with the left arrow key, and right with the right arrow key.I know my "Player" works by the way:
Private Sub PlayerPic_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PlayerPic.Click
MsgBox("test")
[code].....
I am trying to get my mouse to move to the color Red on a webpage, and its not working. The timer is started, and nothing happens. "Web Diner's Hexcode Color Chart" is the name of the website that I am using to move mouse to red.
Dim ProcessHandle As Long, ProcessDC As Long
Private Sub Form_Unload(ByVal Cancel As Integer)
Call ReleaseDC(0, ProcessDC)
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code] .....
Is there a code in which the software scans the screen and point a specified color out of that scan and mark it.
View 1 RepliesApologies as this has probably been answered a million different times a million different ways already. I'm trying to control the mouse. I wish to move the mouse to a given pixel position (x, y) and cause a click. I don't want this to be limited within a form, as I want to control another application. I'm using VB 2005.
View 4 RepliesI'm currently debugging a form that sets a flag when the mouse button is pressed, then clears the flag when the mouse button is released. As long as the mouse button is pressed, the user can move the mouse around and a few things happen depending on where they move. One of the things that happens is that a timer starts, or stops, and a few things change color depending on the mouse position. The timer starts when it should, then stops when it should, but once stopped, it is not re-starting when it should. I can verify that MouseMove events are getting through, because coloring changes as I move the mouse, as it should. This would be a simple thing to debug...except that it requires the darn mouse button to be down, and it uses the mouse move event. Anybody who has put a breakpoint in a mouse move event handler knows the issue: There are THOUSANDS of them. Worse yet, since the mouse button is necessary for switching to the IDE, as well as setting a breakpoint (technically, a keyboard shortcut could do this if I could shift focus), I can't wait for the problem to happen, then switch to the IDE and set a breakpoint to see what is happening then.Does anybody have any tips or techniques for debugging in mouse move events when the mouse button is down and has to stay that way? As it is, I'm going to have to write some funky code into the method just so that I have a place to get a breakpoint when I need it without breaking on every one of the mouse move events.
View 7 RepliesI wonder how to make so if I press a button, then I want the mouse to move and click, but not before the progressbar is 100%. The progressbar is interconnected with a webbrowser.
[Code]...
Form 1. I have 1 picturebox with image how to make when they move the mouse to the picturebox to show in right or left a new window (to read from form2) and when they moveout the mouse from the picturebox auto to close the window
View 4 RepliesI need to find out which tab the mouse is hovering over so that when I open a contextmenu over that tab I can choose to remove that tab. How can this be done
View 6 Repliesi wanna make a fun little Program, I just have a few Questions. On How someone would go about this,Okay i wanna scan a picture and look for a box that has for example 3 across and then bottom line also has 3 lines across. Like This
How would i go about finding This Image ? And or Set of pixels I know a couple ways i Could do this, But it would be a Slow Process Anyone have a suggestion. On How i would Code this,Scan the pix look for a black Pixel then scan next to it etc etc then scan the other line, And if it matches then >Do Something < But that would Be alot of coding and and be Slow, Anyone got an Idea on how i would make it easier
I have a JPEG picture from my digital camera and I want to find the color of a given pixel, say x=10, y=10. How would I go about doing that? I have searched around on the form but nothing is working. I have loaded the picture into a picture box but dont know where to go from there. Also is it possable for it to give me a number corrosponding to each color instead of 3 numbers, one for red, one for green, and one for blue. I am eventually going to be using this to scan through many
View 18 RepliesI've been working on a GUI in WPF which I'm fairly new to, having only used Windows Forms up until now. So far, my GUI is very simple: it contains two rectangles, each of which drops a shadow. The shadow creates an effect of rectangles "floating above the canvas" so to speak.
When one of the rectangles is pressed, the myRectangle.MouseDown event is handled such that the shadow goes away, thus creating an effect of the rectangle being pressed down onto the canvas, like a button.Similarly, when mouse button is released, the myRectangle.MouseDown event is handled such that the shadow reappears and the rectangle "floats" again. This behavior make them resemble buttons. Note, there a reasons I want them to be rectangles and not custom buttons.
[Code]...
If the pointer leaves a rectangle while mouse button is pressed, I'd like shadow to reappear. This is arguable simple, because theoretically in this case, any time myRectangle.MouseLeave is raised, the shadow should come back on, even if it was already there.If the pointer left a rectangle when mouse button was pressed, then came back while before the button was released, I want the shadow to disappear again. This one is what gives me problems. No idea how to do this.
I am try to make a character that follows the mouse, but I cannot find any way in vs 11 to get the mouse coordinates? It is a vb application, could someone please help me out? I tried pointer.location, pointer.margin, but still cannot do it.
View 5 Replies[Code]...
How can i move the picture in picture box or label to the right..im using the code above and my lable was moving to the left.
I need to know how to find the HTML element the mouse if hovering over such as a link so that I can open the link in a new tab, what would be an easy way of doing this?
View 3 RepliesI'm a really beginner so i want to know if its possible to make the mouse move to certain co-ordinates outside of your form and then click , and then pause before repeating.
View 3 RepliesI know how to find the mouse coordinates of different controls and such. What I need is slightly unique.I'm needing to find the coordinates of a picture within a picture. So if I had a picture of a black box with a red x in it, I would need to find the red x inside of it.I already have the bitmaps of the images, so I only need to know how to find the coordinates of where the images lie inside one another.
View 14 RepliesIs there a way to just move the mouse up and down a little, like a little shake, every 5 minutes or so? I've tried to find ways to do this but I'm very confused. I'm fairly new at visual basic but I think I could understand it if someone gave me an example code with an explanation.
View 3 RepliesThis is the code I am working with...
[Code]...
I tried to make a simple game with a picture just moving to the goal. However, I can't move the picture at all.
Here's the code
Public Class Form1
Public Event Up As KeyEventHandler
Private Sub PictureBox1_KeyUp(ByVal sender As Object, ByVal e As
[Code]......
(Note: I first gonna make the picture box move b4 I make the rest of the code)