Public Sub LecteurLogin()
'// Cr�ation du r�pertoire syst�me de CYS2011
Dim dir2 As String = "C:FicheStatsLogin"
If Not IO.Directory.Exists(dir2) Then
[code]....
Basically this is a function I call during the program booting and it creates the necessary directory and also the LOGIN.CYS file empty... then later data can be added.My issue is that it keeps adding a line to the .cys (which is a .txt file) but I just want VB to create a plain text file with no content inside...
I am coming across a lot of odd and annoying problems in this program and have almost had enough lol.
I cannot figure this one out for the life of me. I have used streamwriter a hell of alot of times and never once experienced this. But basically I have a string array and I need to write the entire array to a text file with a new line for each array item. So I have gone ahead and done this:
[Code]...
However the outcome is the text file only contains 1 line and that line is the last item in the array yet I know the array has got at least 50 items in it.
I want that clicking the btn1 it shows the OpenFileDialog and read file that it has got this structure: SKI10 1 71 0 0 18 101 19 0 29 101 30 0 40 101 41 0 50 101 51 0 62 101 63 0 81 101 82 0 95 101 2 0 0 95 165 3 0 1072 01 4 2 1 93 15
I want that it reads all Line of the File and it add an Item in ListBox for line.For example the first Item of the ListBox in this case is
SKI1
And the 2th Item is in this case.
0 1 7
I want using the StreamReader classes.And i want that when i click an Item of the ListBox it shows the Text in the TextBox and I can edit the Line and that clicking antoher button the Item will come updated with new Text of the TextBox.I have also another button for saving the Mod.I can use the AppendText and it create a new file writing ListBox1.Items line for line.
If SaveFileDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then Dim file_esistenteD As StreamWriter[code].....
I have the following which searches the domain and lists out each user. I am writing them to a text file. The problem is each user name as it is found overwrites the other one.
I need them listed one under the other. Have I misplaced the Using statement?
Dim de As New DirectoryEntry() 'Name place to write file to Dim strFile As String = "C:MyFile.txt"
I am needing to write to a "rtf" file, and always insert my text on line 3 of either a new or an existing rtf document.I'm familiar with vb, but have not done much with the system.io functions. I have been testing several examples from the internet using the streamreader and streamwriter but still having issues finding a way to "insert text" on a specified line number. My questions:
1)I will always need to write on line #3, do I need to read all lines as this example shows "lines.AddRange(System.IO.File.ReadAllLines("C :/test/myrtffile.rtf"))"
I need to update the students score with a new score but I cant get it to write to the line that the students current score it at. It just deletes the whole text.
I am writing each line to a text file: Dim objWriter As New System.IO.StreamWriter(filename) For Each x In tofile objWriter.WriteLine(x) Next objWriter.Close() Which works perfectly the only problem is is that when its finished it writes a blank line on the end of the text file which I don't want.
I have the following code, which I run everytime I want to add a new line to my text file, but it is deleting the previous data in the text file every time I do it.
Dim stFilePath As String = "C:file.txt" If File.Exists(stFilePath) Then Else File.CreateText(stFilePath) End If Dim ioFile As New StreamWriter(stFilePath) ioFile.WriteLine("{0}: {1}", DateTime.Now, "test message") ioFile.Close()
I'm testing a small program that can read & write to an rtf file. Examples I have found work fine, although I have two questions:
1)If I need to ALWAYS write to line number 9 of an existing RTF file, do I need to "read" 9 times or can I immediately position myself to line number 9. I have found character manipulation but can't seem to find what I need with positioning to a particular line number.
2)BOLD text: I have found examples where I should be able to format my text, such as
MyFile.WriteLine "" MyFile.WriteLine Text MyFile.WriteLine "0"
but when doing this, it does not "bold" my text, but actually prints the text exactly as shown. I'm looking for information/links that I can "bold" "Italicize" text. Code is written in VS2005.
I am currently using a DevExpress (10.2) Banded GridView within my Visual Studio 2010 project. It works great except I was have an area where I allow the user to choose which columns they want visible or invisible. I noticed that if I make all the columns within a band invisible the band still remains and gives an empty column in my grid. I was wondering if there is some way to automatically
I am taking in two html files and creating one out of them. To do this I am opening the first html file and not writing out the closing </body> and </html> tag and opening the second file and not writing out the corresponding opening tags, as well as the <style></style>section. I start a streamwriter, and write the lines out to it, and then close the streamwriter. My problem is that the output file is filled with strange characters. I've tried opening the streamwriter with different character sets as the third parm, but all this does is change the characters to different strange characters.It says charset=windows-1252 at the tops of the input files (and the output files for that matter - since I'm just reading stuff in and writing it out - with the exceptions mentioned above).Questions;First, do you think I am properly approaching appending two .htm files together?Second, how can I eliminate these strange characters.
what i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here ------------- Dim objReader As New System.IO.StreamReader(sOpenFile.Text) Dim sTextLine As New ArrayList() Dim sText As String = "" Dim i As Integer = 0
Im looking for an event that fires after a user enters a tabbed page and after the datagridview on that tabbed page is painted. BUT only fires on the load, not every single time the datagridview is painted. I am making rows in the datagrid invisible to the user based on wether or not a checkbox in the row is checked.
If I do this on the Tab_Enter event it paints the datagrid before I can loop through the records and change the visible property And if I do this on the Datagridview_Paint event it fires everytime the datagrid is painted (I only want it to fire once)
I have a form with a treeview control (trvControl) which is created at design time. I have a sub which creates a temporary treeview (trvTemp) and adds a bunch of nodes to it. It then uses treeview.nodes.copyto and treeview.nodes.addrange to copy these nodes to the control on my form:
[Code]...
It all seems to be working except for one thing - nothing appears in trvControl. I've run through the code and the node collection is definitely getting copied (I paused in another sub and checked trvControl.nodes and it was correct) but trvControl is still empty on my form.
Incidentally, the reason I am doing this is that I want to use a background worker to populate the nodes but don't want my app locking up for large amounts of time while I access the treenode through an invoke so I thought if I generate the node collection first and just use the invoke to load it into the array it would work better.
I have split container in which I am dragging controls (picture boxes). I would like that part of the dragged control (picture box) that is outside the split container to be invisible. Currently it is on top, and the entire control is visible. Please help me know how can that be accomplished?
how do i make a button not visible but still clickable. If i set visible to false in the properties menu and then click play, i can't click the button.
2 Listboxes gives values to listbox3 like "listbox1item:listbox2item"When I export it to txt file and open in notepad, it shows listbox1item:listbox2item listbox1item:listbox2item listbox1item:listbox2item but when I open same file on wordpad and other text editors it shows like
I wan't to know how to make a labels backcolor invisible.Like it only shows the caption but the backcolor is "nothing".i have put some labels on a many colored picture so I can color the label one color, I just need to get the back color invisible.
I'm creating a text file and, among other things, I need to write the text of the parent and child nodes of a TreeView to the file. I know how to write the contents and read them just fine, but what I can't seem to figure out is how to write the contents if I don't know how many parent nodes or child nodes there are. When I do, I usually do the following:
Okay, this actually relates to some work I'm doing that I already have something in place. So if a change is necessary down the road, I'm in no hurry... But I did a dangerous thing and began reading. As I began reading about ways to stream file data, I became curious as to when it is a good idea to one method or the other.
I am trying to read in a TextBox line by line and take the first 7 characters of each line and output everything in another TextBox.This is what I have so far.
Dim line, lines() As String lines = TextBox1.Text.Split(Environment.NewLine) Dim i As Integer = 0
Im trying to make a custom Yahoo Invisible Detector. But im having problems getting the submit button to click. I can enter the text no problem. have a look at the source on this website to see if they can get it to work ?
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load WebBrowser1.Navigate("http://www.yahoostatus.org/") End Sub
[code]....
It shows the id as <input id="submit" and the value as value="Check" but its not working.
I am using the Streamwriter to send simple messages to other machines in my office. But i hit across a problem today which i never thought about. If the computer im sending the message to, doesn't have the listener running, the sender crashes out. Is there anyway to trap the error, and deal with it nicely (i.e a message box) instead of the app quiting?